{"title":"3\/8\" Drive","description":"\u003cp\u003e3\/8\" drive socket trays — the most common range.\u003c\/p\u003e","products":[{"product_id":"milwaukee-impact-socket-organizer-for-packout-low-profile-3-8-drive-no-skip","title":"Milwaukee Impact Socket Organizer for Packout Low Profile, 3\/8\" Drive No-Skip","description":"\u003cp\u003eMilwaukee Packout Socket Organizer – 3\/8\" Impact Sockets (SAE \u0026amp; Metric, PETG — heat-resistant material)\u003c\/p\u003e\n\n\u003cp\u003e3D-printed, single-piece PETG (tough, heat-resistant material) organizer trays designed specifically for Milwaukee 3\/8\" drive impact sockets, precision-fit for the Milwaukee Packout Low-Profile Organizers (48-22-8431 or 48-22-8436).\u003c\/p\u003e\n\n\u003cp\u003eEvery socket has a dedicated, clearly labeled location — no filler slots, no wasted space, and no rattling during transport.\u003c\/p\u003e\n\n\u003cp\u003eOrganizer trays only. Tools and Packout case not included.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS FITS\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee Packout\u003cbr\u003e\n• 48-22-8431\u003cbr\u003e\n• 48-22-8436\u003cbr\u003e\n(Low-Profile Organizers)\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee 3\/8\" Drive Impact Sockets\u003cbr\u003e\n• SAE: 1\/4\" – 1\" (deep and shallow)\u003cbr\u003e\n• Metric: 6mm – 24mm (deep and shallow)\u003c\/p\u003e\n\n\u003cp\u003eDesigned so every socket size has a specific, labeled location — no skipped sizes and no unused pockets.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ Not universal. These trays are dimensioned specifically for Milwaukee 3\/8\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCAPACITY\u003c\/p\u003e\n\n\u003cp\u003eComplete Set Capacity (SAE + Metric)\u003cbr\u003e\n• 68 total sockets\u003cbr\u003e\n– 30 SAE (15 sizes, deep and shallow)\u003cbr\u003e\n– 38 Metric (19 sizes, deep and shallow)\u003c\/p\u003e\n\n\u003cp\u003e• Additional storage for common accessories such as:\u003cbr\u003e\n– 3\/8\" impact adaptor\u003cbr\u003e\n– Extensions\u003cbr\u003e\n– Universal \/ swivel\u003c\/p\u003e\n\n\u003cp\u003eInterchangeable Single Compartment\u003cbr\u003e\n• SAE or Metric\u003cbr\u003e\n• Fits left or right side of the organizer\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCONFIGURATION OPTIONS\u003c\/p\u003e\n\n\u003cp\u003eComplete Set – $80\u003cbr\u003e\n• Includes one SAE tray and one Metric tray\u003cbr\u003e\n• Fills both compartments of one Low-Profile Organizer\u003c\/p\u003e\n\n\u003cp\u003eSingle Compartment – $45\u003cbr\u003e\n• Includes one tray only\u003cbr\u003e\n• Choose SAE or Metric\u003cbr\u003e\n• Compatible with either side of the organizer\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eDESIGN \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\n\u003cp\u003e• Single-piece, full-size print\u003cbr\u003e\n• No glued sections or bonded parts\u003c\/p\u003e\n\n\u003cp\u003e• Printed in PETG — a tough, heat-resistant material:\u003cbr\u003e\n– More impact-resistant than PLA\u003cbr\u003e\n– Better heat tolerance for vehicle storage\u003cbr\u003e\n– Oil and grease resistant\u003cbr\u003e\n– Will not soften or warp in hot vehicles like PLA\u003c\/p\u003e\n\n\u003cp\u003e• Socket pockets are designed to retain sockets during transport, including:\u003cbr\u003e\n– Vertical carry\u003cbr\u003e\n– Vehicle movement\u003cbr\u003e\n– Accidental drops\u003c\/p\u003e\n\n\u003cp\u003e• Clear, printed size labels\u003cbr\u003e\n• Rigid structure — does not compress or tear like foam\u003cbr\u003e\n• Designed to fully close the Packout lid without interference\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed, inspected, and test-fit using real Milwaukee impact sockets before shipping.\u003c\/p\u003e\n\n\u003cp\u003eMade in West Virginia, USA.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eABOUT 3D PRINTING SURFACE FINISH\u003c\/p\u003e\n\n\u003cp\u003eThese organizers are produced using professional-grade 3D printing. Unlike injection-molded plastic, 3D-printed parts may show minor surface characteristics that are normal for the process.\u003c\/p\u003e\n\n\u003cp\u003e• Visible layer lines and slight texture variations are normal\u003cbr\u003e\n• Small cosmetic marks or surface inconsistencies may be present\u003cbr\u003e\n• These do not affect strength, fit, or function\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed for durability and real-world jobsite use — appearance may vary slightly from tray to tray, but performance remains consistent.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSTL FILES ALSO AVAILABLE\u003c\/p\u003e\n\n\u003cp\u003eIf you prefer to print your own trays, digital STL files are sold separately in our shop.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for fully printed, ready-to-use organizers — no printing, tuning, or test-fitting required.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eOTHER BRANDS OR CUSTOM REQUESTS\u003c\/p\u003e\n\n\u003cp\u003eThese trays are designed for Milwaukee 3\/8\" impact sockets only.\u003c\/p\u003e\n\n\u003cp\u003eIf you use a different socket brand or want a tray for another Packout model, feel free to message us. We're open to:\u003cbr\u003e\n• Custom designs\u003cbr\u003e\n• Other socket brands\u003cbr\u003e\n• Suggestions for future organizers\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSHIPPING\u003c\/p\u003e\n\n\u003cp\u003e• Made to order\u003cbr\u003e\n• Ships in 3–5 business days\u003cbr\u003e\n• Carefully packaged to prevent damage during transit\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSUMMARY (QUICK SCAN)\u003c\/p\u003e\n\n\u003cp\u003e✓ Fits Milwaukee Packout Low-Profile Organizers (48-22-8431 \/ 48-22-8436)\u003cbr\u003e\n✓ Designed for Milwaukee 3\/8\" drive impact sockets\u003cbr\u003e\n✓ Holds complete SAE and\/or Metric sets (68 sockets total)\u003cbr\u003e\n✓ Retains sockets during vertical transport and jobsite handling\u003cbr\u003e\n✓ Single-piece PETG construction\u003cbr\u003e\n✓ Printed trays or DIY STL files available\u003cbr\u003e\n✓ Not universal — Milwaukee-specific by design\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"SAE Tray Only \/ Black Top\/Red Letter","offer_id":47700070138092,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"SAE Tray Only \/ Red Top\/Black Letter","offer_id":47700070170860,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Metric Tray Only \/ Black Top\/Red Letter","offer_id":47700070203628,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Metric Tray Only \/ Red Top\/Black Letter","offer_id":47700070236396,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Set  - Metric \u0026 SAE \/ Black Top\/Red Letter","offer_id":47700070269164,"sku":"MIL-002-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set  - Metric \u0026 SAE \/ Red Top\/Black Letter","offer_id":47700070301932,"sku":"MIL-002-PHY","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7841294862_j4m3.jpg?v=1780504303"},{"product_id":"milwaukee-packout-shockwave-impact-socket-organizer-3d-printed-3-8-metric-complete-no-skip-standard-deep-socket-tray-gift-for-him","title":"Milwaukee Packout Shockwave Impact Socket Organizer 3D Printed 3\/8 Metric Complete No-Skip Standard Deep Socket Tray Gift for Him","description":"\u003cp\u003ePrecision-fit tray for the complete Milwaukee SHOCKWAVE 3\/8\" metric impact socket lineup — 6mm through 24mm, standard and deep, all 38 sockets — drops straight into your Milwaukee Packout.\u003c\/p\u003e\n\n\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nThis is an organizer requested by a customer to contain all of the available 3\/8\" drive Milwaukee Impact metric sockets available in both deep and shallow. It takes several different sets or individual socket purchases to build this full set.\u003c\/p\u003e \n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 38 Milwaukee SHOCKWAVE 3\/8\" metric impact sockets — 19 standard and 19 deep, 6mm through 24mm, no sizes skipped\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed for the complete Milwaukee SHOCKWAVE 3\/8\" Drive metric impact socket lineup — every available size from 6mm through 24mm in both standard and deep, no sizes skipped.\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (19 sockets, 6mm–24mm):\u003cbr\u003e\n6mm (49-66-6130) · 7mm (49-66-6131) · 8mm (49-66-6132) · 9mm (49-66-6133) · 10mm (49-66-6134) · 11mm (49-66-6135) · 12mm (49-66-6136) · 13mm (49-66-6137) · 14mm (49-66-6138) · 15mm (49-66-6139) · 16mm (49-66-6140) · 17mm (49-66-6141) · 18mm (49-66-6142) · 19mm (49-66-6143) · 20mm (49-66-6737) · 21mm (49-66-6144) · 22mm (49-66-6145) · 23mm (49-66-6146) · 24mm (49-66-6147)\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (19 sockets, 6mm–24mm):\u003cbr\u003e\n6mm (49-66-6148) · 7mm (49-66-6149) · 8mm (49-66-6150) · 9mm (49-66-6151) · 10mm (49-66-6152) · 11mm (49-66-6153) · 12mm (49-66-6154) · 13mm (49-66-6155) · 14mm (49-66-6156) · 15mm (49-66-6157) · 16mm (49-66-6158) · 17mm (49-66-6159) · 18mm (49-66-6160) · 19mm (49-66-6161) · 20mm (49-66-6738) · 21mm (49-66-6162) · 22mm (49-66-6163) · 23mm (49-66-6164) · 24mm (49-66-6165)\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 3\/8\" impact sockets. Other brands may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for the matching Milwaukee SHOCKWAVE 3\/8\" SAE companion tray and the full SAE + Metric bundle.\u003cbr\u003e\n[PLACEHOLDER — SAE tray URL]\u003c\/p\u003e\n\n\u003cp\u003eDon't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Complete no-skip metric lineup — every size Milwaukee makes in 3\/8\" metric impact, standard and deep, in one tray\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: The largest sockets require an opening that goes all the way through the tray floor. This is intentional — the socket diameter exactly matches the pocket width, so it seats fully and is retained securely.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Low-Profile Organizer (48-22-8431), Compact Low-Profile Organizer (48-22-8436), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for the matching SAE companion tray and the full SAE + Metric bundle.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who want every Milwaukee 3\/8\" metric impact socket organized and at hand. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700070629612,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700070662380,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700070695148,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700070727916,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7899835908_1772.jpg?v=1780504306"},{"product_id":"milwaukee-packout-shockwave-49-66-7009-impact-socket-organizer-43-piece-3-8-packout-tray-sae-metric","title":"Milwaukee Packout Shockwave 49-66-7009 Impact Socket Organizer – 43-Piece 3\/8\" Packout Tray, SAE \u0026 Metric","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed socket tray organizes your complete Milwaukee SHOCKWAVE 49-66-7009 SAE and metric impact set — standard, deep, and accessories all in one place and drops straight into your Milwaukee Packout.\u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, storage tray, and Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 40 sockets from the Milwaukee SHOCKWAVE 49-66-7009 SAE and metric impact set — standard and deep\u003cbr\u003e\n- Dedicated pocket area for the included 3\" extension, universal joint, and 3\/8\" adapter\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8436 (Low-Profile Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use the tray standalone in any drawer, or add the optional dovetail-locking grid frame to lock multiple trays into a perfectly aligned system (see shop)\u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed specifically for the Milwaukee SHOCKWAVE Impact Duty 3\/8 in. Drive SAE \u0026amp; Metric Deep 6-Point Socket Set, 43-Piece (Item 49-66-7009).\u003cbr\u003e\n \u003cbr\u003e\n40 sockets — standard and deep in both SAE and metric:\u003cbr\u003e\nSAE standard: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nSAE deep: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nMetric standard: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nMetric deep: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nAccessories: 3\" extension, universal joint, 3\/8\" adapter\u003cbr\u003e\n \u003cbr\u003e\nIndividual SAE socket part numbers:\u003cbr\u003e\nStandard:\u003cbr\u003e\n- 5\/16\" — 49-66-6102\u003cbr\u003e\n- 3\/8\" — 49-66-6104\u003cbr\u003e\n- 7\/16\" — 49-66-6105\u003cbr\u003e\n- 1\/2\" — 49-66-6106\u003cbr\u003e\n- 9\/16\" — 49-66-6107\u003cbr\u003e\n- 5\/8\" — 49-66-6108\u003cbr\u003e\n- 11\/16\" — 49-66-6109\u003cbr\u003e\n- 3\/4\" — 49-66-6110\u003cbr\u003e\n \u003cbr\u003e\nDeep:\u003cbr\u003e\n- 5\/16\" — 49-66-6117\u003cbr\u003e\n- 3\/8\" — 49-66-6119\u003cbr\u003e\n- 7\/16\" — 49-66-6120\u003cbr\u003e\n- 1\/2\" — 49-66-6121\u003cbr\u003e\n- 9\/16\" — 49-66-6122\u003cbr\u003e\n- 5\/8\" — 49-66-6123\u003cbr\u003e\n- 11\/16\" — 49-66-6124\u003cbr\u003e\n- 3\/4\" — 49-66-6125\u003cbr\u003e\n \u003cbr\u003e\nIndividual metric socket part numbers:\u003cbr\u003e\nStandard:\u003cbr\u003e\n- 8mm — 49-66-6132\u003cbr\u003e\n- 9mm — 49-66-6133\u003cbr\u003e\n- 10mm — 49-66-6134\u003cbr\u003e\n- 11mm — 49-66-6135\u003cbr\u003e\n- 12mm — 49-66-6136\u003cbr\u003e\n- 13mm — 49-66-6137\u003cbr\u003e\n- 14mm — 49-66-6138\u003cbr\u003e\n- 15mm — 49-66-6139\u003cbr\u003e\n- 16mm — 49-66-6140\u003cbr\u003e\n- 17mm — 49-66-6141\u003cbr\u003e\n- 18mm — 49-66-6142\u003cbr\u003e\n- 19mm — 49-66-6143\u003cbr\u003e\n \u003cbr\u003e\nDeep:\u003cbr\u003e\n- 8mm — 49-66-6150\u003cbr\u003e\n- 9mm — 49-66-6151\u003cbr\u003e\n- 10mm — 49-66-6152\u003cbr\u003e\n- 11mm — 49-66-6153\u003cbr\u003e\n- 12mm — 49-66-6154\u003cbr\u003e\n- 13mm — 49-66-6155\u003cbr\u003e\n- 14mm — 49-66-6156\u003cbr\u003e\n- 15mm — 49-66-6157\u003cbr\u003e\n- 16mm — 49-66-6158\u003cbr\u003e\n- 17mm — 49-66-6159\u003cbr\u003e\n- 18mm — 49-66-6160\u003cbr\u003e\n- 19mm — 49-66-6161\u003cbr\u003e\n \u003cbr\u003e\n⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 49-66-7009 impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.\u003cbr\u003e\n \u003cbr\u003e\nCheck my shop for trays covering other combinations of Milwaukee SHOCKWAVE 3\/8\" and 1\/2\" drive impact sockets. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading. Built for the shop, the truck, and the jobsite.\u003cbr\u003e\n- Tray colors: Black or Red\u003cbr\u003e\n- Label colors: Red, Black, or White\u003cbr\u003e\n- Select your color combination from the purchase options.\u003cbr\u003e\n- Every tray is printed and test-fit before shipping.\u003cbr\u003e\n- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned in any standard drawer (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Dedicated accessory pockets — the extension, universal joint, and adapter have a home too\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n \u003cbr\u003e\nTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Compact Low-Profile (48-22-8436), Low-Profile (48-22-8431), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching SAE and metric companion trays that fit together into a complete organized system.\u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.\u003cbr\u003e\n \u003cbr\u003e\nPLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray","offer_id":47700070924524,"sku":"MIL-006-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray","offer_id":47700070957292,"sku":"MIL-006-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7930874035_epuh.jpg?v=1780504309"},{"product_id":"milwaukee-packout-socket-organizer-3d-printed-tekton-3-8-sae-metric-socket-tray-mechanic-gift","title":"Milwaukee Packout Socket Organizer 3D Printed Tekton 3\/8\" SAE Metric Socket Tray Mechanic Gift","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed Tekton 3\/8\" drive socket tray set drops straight into your Milwaukee Packout 48-22-8431 — no setup, no searching.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed trays only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 SAE socket tray — holds all 30 Tekton 3\/8\" SAE sockets (15 sizes, shallow + deep)\u003cbr\u003e\n  plus dedicated pockets for ratchet, extensions, and universal joint\u003cbr\u003e\n- 1 Metric socket tray — holds all 38 Tekton 3\/8\" metric sockets (19 sizes, shallow + deep)\u003cbr\u003e\n- Size labels embossed directly into every pocket on both trays\u003cbr\u003e\n- Both trays printed, inspected, and test-fit before shipping\u003c\/p\u003e\n\n\u003cp\u003eCASE COMPATIBILITY — IMPORTANT\u003cbr\u003e\n✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) ONLY\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit: 48-22-8436 (Compact Low-Profile) | 48-22-8430 (Organizer) | 48-22-8435 (Compact Organizer)\u003cbr\u003e\nBuyers with those cases should message before ordering.\u003c\/p\u003e\n\n\u003cp\u003eSIDE SELECTION — REQUIRED\u003cbr\u003e\nEach tray is designed for one specific side of the 48-22-8431 case. Stand in front of your Packout with the hinge facing away from you. Choose Left or Right in the personalization field.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nSAE TRAY — Compatible sets (choose one option):\u003c\/p\u003e\n\n\u003cp\u003eComplete sets (fills all 30 socket pockets + accessory pockets in one purchase):\u003cbr\u003e\n  SKT15101 — 34pc, 6-point SAE 1\/4\"–1\" shallow + deep (includes ratchet + accessories)\u003cbr\u003e\n  SHD91209 — 30pc, 6-point SAE 1\/4\"–1\" shallow + deep\u003cbr\u003e\n  SHD91210 — 30pc, 12-point SAE 1\/4\"–1\" shallow + deep\u003c\/p\u003e\n\n\u003cp\u003eOr pair shallow + deep sets to fill all 30 socket pockets:\u003cbr\u003e\n  SHD91109 (6-pt shallow 15pc) + SHD91113 (6-pt deep 15pc)\u003cbr\u003e\n  SHD91111 (12-pt shallow 15pc) + SHD91115 (12-pt deep 15pc)\u003c\/p\u003e\n\n\u003cp\u003eAccessory pockets fit:\u003cbr\u003e\n  SRH11108 (ratchet) · SHA11103 (3\" ext) · SHA11106 (6\" ext) · SHA12101 (universal joint)\u003c\/p\u003e\n\n\u003cp\u003eMETRIC TRAY — Compatible sets (choose one option):\u003c\/p\u003e\n\n\u003cp\u003eComplete sets (fills all 38 metric socket pockets in one purchase):\u003cbr\u003e\n  SHD91211 — 38pc, 6-point metric 6–24mm shallow + deep\u003cbr\u003e\n  SHD91212 — 38pc, 12-point metric 6–24mm shallow + deep\u003c\/p\u003e\n\n\u003cp\u003eOr pair shallow + deep sets:\u003cbr\u003e\n  SHD91110 (6-pt shallow 19pc) + SHD91114 (6-pt deep 19pc)\u003cbr\u003e\n  SHD91112 (12-pt shallow 19pc) + SHD91116 (12-pt deep 19pc)\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL — Pockets are dimensioned specifically for Tekton 3\/8\" sockets.\u003cbr\u003e\nOther brands use different wall thicknesses and lengths and may not fit correctly.\u003cbr\u003e\nMessage before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eWant only one tray? See my shop for the SAE-only and Metric-only versions:\u003cbr\u003e\nSAE: https:\/\/www.etsy.com\/listing\/4483535264\u003cbr\u003e\nMetric: https:\/\/www.etsy.com\/listing\/4483533111\u003c\/p\u003e\n\n\u003cp\u003eDon't see what you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect color combination from purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines. Normal — no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ No-skip coverage — every SAE size 1\/4\"–1\" and every metric size 6–24mm, shallow and deep, with a dedicated labeled pocket for each\u003cbr\u003e\n✔ Fits 6-point AND 12-point Tekton sockets — both point styles share the same outer diameter; every compatible set above drops straight in\u003cbr\u003e\n✔ Dedicated pockets for ratchet, extensions, and universal joint (SAE tray)\u003cbr\u003e\n✔ Sockets stay put during transport — vertical carry, vehicle trips, accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Open-bottom pockets on largest sockets are intentional — socket retained from the sides\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a different socket set or a different Packout model? Message me with your brand, model number, and case — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific setup. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Set - Metric-L\/SAE-R \/ Black Top\/White Ltr","offer_id":47700070990060,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set - Metric-L\/SAE-R \/ Black Top\/Red Ltr","offer_id":47700071022828,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set - Metric-L\/SAE-R \/ Red Top\/Black Ltr","offer_id":47700071055596,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set - Metric-L\/SAE-R \/ Red Top\/White Ltr","offer_id":47700071088364,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set - SAE-L\/Metric-R \/ Black Top\/White Ltr","offer_id":47700071121132,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set - SAE-L\/Metric-R \/ Black Top\/Red Ltr","offer_id":47700071153900,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set - SAE-L\/Metric-R \/ Red Top\/Black Ltr","offer_id":47700071186668,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set - SAE-L\/Metric-R \/ Red Top\/White Ltr","offer_id":47700071219436,"sku":"TEK-001-PHY","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7930795547_p0uu.jpg?v=1780504311"},{"product_id":"milwaukee-packout-sunex-3342-3-8-sae-metric-socket-organizer-tray-42-piece-impact-mechanic-gift","title":"Milwaukee Packout Sunex 3342 3\/8\" SAE Metric Socket Organizer Tray 42-Piece Impact Mechanic Gift","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nBy customer request, this tray is custom-designed to accommodate the Sunex 3342 3\/8\" metric \u0026amp; SAE socket set, including the swivel and 3\" extension. As a reminder, each of our Mountaineer Maker system socket trays is universal in shape and design, which allows them to not only fit the Milwaukee Packout organizers but also the Packout drawers, Bauer drawers, and soon, the Klein ModBox storage boxes. Keep in mind that that these other storage units require custom adaptors which are available in our store or by request.\u003c\/p\u003e \n\n\u003cp\u003e⚠️ IMPORTANT — MANUFACTURING ORIGIN NOTE:\u003cbr\u003e\nSunex recently moved production of the 3342 set from Taiwan to China. Socket dimensions have changed as a result of this manufacturing shift. This tray was designed and sized specifically for the TAIWAN-manufactured Sunex 3342 set. If you own the newer CHINA-manufactured version, the socket dimensions may differ, and the sockets may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003eHow to identify your set: Check the individual socket markings — Taiwan-manufactured sockets are stamped \"TAIWAN\" on the socket body. China-manufactured sockets will not carry this marking. If you are unsure which version you own, message me before ordering, and I will help you confirm fit.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by Mountaineer Maker.\u003c\/p\u003e\n\n\u003cp\u003eStop hunting through a pile of impact sockets or stacks of nondescript blow-molded cases. This 3D printed tray holds all 40 sockets from the Sunex 3342 3\/8\" master set — plus the included extension and universal joint — and drops straight into your Milwaukee Packout with no setup required.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and the Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\nPockets for all 40 sockets: 12 standard metric (8mm–19mm), 12 deep metric (8mm–19mm), 8 standard SAE (5\/16\"–3\/4\"), 8 deep SAE (5\/16\"–3\/4\")\u003cbr\u003e\nDedicated pockets for the included 3\" extension and universal joint\u003cbr\u003e\nSize labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nSunex 3342 — 3\/8\" Drive SAE \u0026amp; Metric 6 Point Standard \u0026amp; Deep 42-Piece Master Impact Socket Set\u003cbr\u003e\nMetric Standard: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nMetric Deep: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nSAE Standard: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nSAE Deep: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nAccessories: 3\" Extension, Universal Joint\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Sunex 3342 impact sockets. Other brands' sockets use different wall thicknesses and lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for trays covering other Sunex sets and drive sizes.\u003c\/p\u003e \n\n\u003cp\u003eDon't see what you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nEvery tray is printed and test-fit before shipping.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines. This is normal — no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Dedicated pockets for accessories — extension and universal joint have their own labeled spots, not just tossed in a corner\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Low-Profile Organizer (48-22-8431), Compact Low-Profile Organizer (48-22-8436), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for companion trays covering other Sunex and impact socket sets.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. The Sunex 3342 is a serious master set — it deserves a serious home. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every single day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained on the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red","offer_id":47700071547116,"sku":"SUN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":47700071579884,"sku":"SUN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.8054182040_5rrl.jpg?v=1780504315"},{"product_id":"milwaukee-packout-socket-organizer-stl-file-tekton-3-8-metric-socket-tray-shd91211","title":"Milwaukee Packout Socket Organizer STL File Tekton 3\/8\" Metric Socket Tray SHD91211","description":"\u003cp\u003eStop hunting for the right metric socket. This Tekton 3\/8\" metric socket tray drops straight into your Milwaukee Packout 48-22-8431 — print it, load it, done.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL FILE ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the digital STL file only. Sockets, tools, and Milwaukee Packout case are not included. After purchase, you'll receive an instant download link via Etsy — print it yourself on any FDM printer. Nothing is shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 2 STL files (Left tray + Right tray) — delivered as a single ZIP download, instant access after purchase\u003cbr\u003e\n- Both orientations included — print whichever side your setup needs, or print both to fill the full case\u003cbr\u003e\n- Personal use license included (see license section below)\u003c\/p\u003e\n\n\u003cp\u003eCASE COMPATIBILITY — IMPORTANT\u003cbr\u003e\n✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) ONLY\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit: 48-22-8436 (Compact Low-Profile) | 48-22-8430 (Organizer) | 48-22-8435 (Compact Organizer)\u003cbr\u003e\nThese trays are sized specifically for the 48-22-8431 footprint. If you have one of the other Packout models, message me before purchasing — I may have a compatible option.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nComplete sets (single purchase fills all 38 metric socket pockets):\u003cbr\u003e\n  SHD91211 — 3\/8\" drive, 6-point metric, 38pc, 6–24mm shallow + deep\u003cbr\u003e\n  SHD91212 — 3\/8\" drive, 12-point metric, 38pc, 6–24mm shallow + deep\u003c\/p\u003e\n\n\u003cp\u003eOr pair shallow + deep separately to fill all 38 metric socket pockets:\u003cbr\u003e\n  SHD91110 (6-pt shallow, 19pc) + SHD91114 (6-pt deep, 19pc)\u003cbr\u003e\n  SHD91112 (12-pt shallow, 19pc) + SHD91116 (12-pt deep, 19pc)\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL — Pockets are dimensioned specifically for Tekton 3\/8\" sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me before purchasing if unsure.\u003c\/p\u003e\n\n\u003cp\u003eAlso available in the shop:\u003cbr\u003e\nMatching SAE STL (Left + Right ZIP): https:\/\/www.etsy.com\/listing\/1680673540\u003cbr\u003e\nPhysical Metric tray (printed \u0026amp; shipped by MountaineerMaker): https:\/\/www.etsy.com\/listing\/4483533111\u003cbr\u003e\nPhysical SAE tray (printed \u0026amp; shipped): https:\/\/www.etsy.com\/listing\/4483535264\u003cbr\u003e\nComplete SAE + Metric physical bundle: https:\/\/www.etsy.com\/listing\/4424033552\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for trays covering other Tekton 3\/8\" socket combinations. Don't see what you need? Message me — I can design a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003ePRINT SPECS\u003cbr\u003e\n- Print orientation: Flat — no rotation needed\u003cbr\u003e\n- Supports: None required\u003cbr\u003e\n- Tested on: Creality K2 Plus\u003cbr\u003e\n- Recommended material: PETG — a tough, heat-resistant filament; more impact-resistant than PLA, better heat tolerance for vehicle and garage storage, oil and grease resistant. PLA works fine for home use.\u003cbr\u003e\n- Not sure if your printer's bed is large enough? Message me — I'm happy to confirm.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ No-skip metric coverage — 38 pockets for 19 sizes from 6mm to 24mm, shallow and deep, with a dedicated labeled pocket for each\u003cbr\u003e\n✔ Fits 6-point AND 12-point Tekton sockets — both point styles share the same outer diameter; every compatible set above drops straight in\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned for vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Print in any color — match your Packout, toolbox, or shop aesthetic\u003cbr\u003e\n✔ Both Left and Right files included in a single ZIP — print one side or both\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a self-print project for anyone who wants their toolbox dialed in. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eFREQUENTLY ASKED QUESTIONS\u003c\/p\u003e\n\n\u003cp\u003eIs this a physical product?\u003cbr\u003e\nNo — this is a digital download only. You receive STL files to print yourself. Nothing is shipped. You'll get an instant download link via Etsy after purchase.\u003c\/p\u003e\n\n\u003cp\u003eWill it fit my Packout?\u003cbr\u003e\nThis tray fits specifically in the Milwaukee Packout 48-22-8431 (Low-Profile Organizer) only. It does NOT fit the 48-22-8436, 48-22-8430, or 48-22-8435 — those models have different internal dimensions. Check the label on the bottom of your case to confirm your model number before purchasing.\u003c\/p\u003e\n\n\u003cp\u003eDo I get both Left and Right files?\u003cbr\u003e\nYes — the ZIP download includes both the Left and Right STL files. Print whichever orientation your setup needs, or print both if you want to fill both sides of your case.\u003c\/p\u003e\n\n\u003cp\u003eWill the sockets stay put?\u003cbr\u003e\nYes — pockets are dimensioned to hold sockets securely during vertical carry, vehicle transport, and drops. They won't rattle or shift in the case.\u003c\/p\u003e\n\n\u003cp\u003eWhat printer do I need?\u003cbr\u003e\nAny FDM printer with a large enough bed. Tested on: Creality K2 Plus. Message me if you want to confirm compatibility with your specific printer.\u003c\/p\u003e\n\n\u003cp\u003eCan I sell items I print from this file?\u003cbr\u003e\nNo — personal use only. Printed items may not be sold, shared, or distributed.\u003c\/p\u003e\n\n\u003cp\u003eWill it fit my [Brand] sockets?\u003cbr\u003e\nThis tray is designed specifically for Tekton 3\/8\" sockets. Message me with your brand and model number and I'll let you know if they'll fit.\u003c\/p\u003e\n\n\u003cp\u003eCan I get a custom version for my specific socket set?\u003cbr\u003e\nYes — message me with your brand and model number and I can usually make it work.\u003c\/p\u003e\n\n\u003cp\u003ePrint questions?\u003cbr\u003e\nMessage me — I respond quickly and love helping customers get a great result.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nIf there's an issue with your file or print, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use only. This STL file may not be resold, redistributed, or shared in any form — digital or as printed objects — without written permission from MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you buy? Message me — I'm happy to confirm fit for your specific setup. If your print turns out great, a quick review goes a long way for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700072071404,"sku":"TEK-004-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7931698497_8emh.jpg?v=1780504326"},{"product_id":"milwaukee-packout-socket-organizer-stl-file-tekton-3-8-sae-socket-tray-skt15101","title":"Milwaukee Packout Socket Organizer STL File Tekton 3\/8\" SAE Socket Tray SKT15101","description":"\u003cp\u003eStop hunting for the right SAE socket. This Tekton 3\/8\" SAE socket tray drops straight into your Milwaukee Packout 48-22-8431 — print it, load it, done.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL FILE ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the digital STL file only. Sockets, tools, and Milwaukee Packout case are not included. After purchase, you'll receive an instant download link via Etsy — print it yourself on any FDM printer. Nothing is shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 2 STL files (Left tray + Right tray) — delivered as a single ZIP download, instant access after purchase\u003cbr\u003e\n- Both orientations included — print whichever side your setup needs, or print both to fill the full case\u003cbr\u003e\n- Personal use license included (see license section below)\u003c\/p\u003e\n\n\u003cp\u003eCASE COMPATIBILITY — IMPORTANT\u003cbr\u003e\n✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) ONLY\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit: 48-22-8436 (Compact Low-Profile) | 48-22-8430 (Organizer) | 48-22-8435 (Compact Organizer)\u003cbr\u003e\nThese trays are sized specifically for the 48-22-8431 footprint. If you have one of the other Packout models, message me before purchasing — I may have a compatible option.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nComplete sets (single purchase fills all 30 socket pockets + accessory pockets):\u003cbr\u003e\n  SKT15101 — 3\/8\" drive, 6-point SAE, 34pc, 1\/4\"–1\" shallow + deep\u003cbr\u003e\n    (also fills ratchet + accessory pockets: SRH11108, SHA11103, SHA11106, SHA12101)\u003cbr\u003e\n  SHD91209 — 3\/8\" drive, 6-point SAE, 30pc, 1\/4\"–1\" shallow + deep\u003cbr\u003e\n  SHD91210 — 3\/8\" drive, 12-point SAE, 30pc, 1\/4\"–1\" shallow + deep\u003c\/p\u003e\n\n\u003cp\u003eOr pair shallow + deep separately to fill all 30 socket pockets:\u003cbr\u003e\n  SHD91109 (6-pt shallow, 15pc) + SHD91113 (6-pt deep, 15pc)\u003cbr\u003e\n  SHD91111 (12-pt shallow, 15pc) + SHD91115 (12-pt deep, 15pc)\u003c\/p\u003e\n\n\u003cp\u003eAccessory pockets fit:\u003cbr\u003e\n  SRH11108 (ratchet) · SHA11103 (3\" ext) · SHA11106 (6\" ext) · SHA12101 (universal joint)\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL — Pockets are dimensioned specifically for Tekton 3\/8\" sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me before purchasing if unsure.\u003c\/p\u003e\n\n\u003cp\u003eAlso available in the shop:\u003cbr\u003e\nMatching Metric STL (Left + Right ZIP): https:\/\/www.etsy.com\/listing\/1689153447\u003cbr\u003e\nPhysical SAE tray (printed \u0026amp; shipped by MountaineerMaker): https:\/\/www.etsy.com\/listing\/4483535264\u003cbr\u003e\nPhysical Metric tray (printed \u0026amp; shipped): https:\/\/www.etsy.com\/listing\/4483533111\u003cbr\u003e\nComplete SAE + Metric physical bundle: https:\/\/www.etsy.com\/listing\/4424033552\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for trays covering other Tekton 3\/8\" socket combinations. Don't see what you need? Message me — I can design a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003ePRINT SPECS\u003cbr\u003e\n- Print orientation: Flat — no rotation needed\u003cbr\u003e\n- Supports: None required\u003cbr\u003e\n- Tested on: Creality K2 Plus\u003cbr\u003e\n- Recommended material: PETG — a tough, heat-resistant filament; more impact-resistant than PLA, better heat tolerance for vehicle and garage storage, oil and grease resistant. PLA works fine for home use.\u003cbr\u003e\n- Not sure if your printer's bed is large enough? Message me — I'm happy to confirm.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ No-skip SAE coverage — 30 pockets for 15 sizes from 1\/4\" to 1\", shallow and deep, with a dedicated labeled pocket for each\u003cbr\u003e\n✔ Fits 6-point AND 12-point Tekton sockets — both point styles share the same outer diameter; every compatible set above drops straight in\u003cbr\u003e\n✔ Dedicated pockets for ratchet, extensions, and universal joint\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned for vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Print in any color — match your Packout, toolbox, or shop aesthetic\u003cbr\u003e\n✔ Both Left and Right files included in a single ZIP — print one side or both\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a self-print project for anyone who wants their toolbox dialed in. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eFREQUENTLY ASKED QUESTIONS\u003c\/p\u003e\n\n\u003cp\u003eIs this a physical product?\u003cbr\u003e\nNo — this is a digital download only. You receive STL files to print yourself. Nothing is shipped. You'll get an instant download link via Etsy after purchase.\u003c\/p\u003e\n\n\u003cp\u003eWill it fit my Packout?\u003cbr\u003e\nThis tray fits specifically in the Milwaukee Packout 48-22-8431 (Low-Profile Organizer) only. It does NOT fit the 48-22-8436, 48-22-8430, or 48-22-8435 — those models have different internal dimensions. Check the label on the bottom of your case to confirm your model number before purchasing.\u003c\/p\u003e\n\n\u003cp\u003eDo I get both Left and Right files?\u003cbr\u003e\nYes — the ZIP download includes both the Left and Right STL files. Print whichever orientation your setup needs, or print both if you want to fill both sides of your case.\u003c\/p\u003e\n\n\u003cp\u003eWill the sockets stay put?\u003cbr\u003e\nYes — pockets are dimensioned to hold sockets securely during vertical carry, vehicle transport, and drops. They won't rattle or shift in the case.\u003c\/p\u003e\n\n\u003cp\u003eWhat printer do I need?\u003cbr\u003e\nAny FDM printer with a large enough bed. Tested on: Creality K2 Plus. Message me if you want to confirm compatibility with your specific printer.\u003c\/p\u003e\n\n\u003cp\u003eCan I sell items I print from this file?\u003cbr\u003e\nNo — personal use only. Printed items may not be sold, shared, or distributed.\u003c\/p\u003e\n\n\u003cp\u003eWill it fit my [Brand] sockets?\u003cbr\u003e\nThis tray is designed specifically for Tekton 3\/8\" sockets. Message me with your brand and model number and I'll let you know if they'll fit.\u003c\/p\u003e\n\n\u003cp\u003eCan I get a custom version for my specific socket set?\u003cbr\u003e\nYes — message me with your brand and model number and I can usually make it work.\u003c\/p\u003e\n\n\u003cp\u003ePrint questions?\u003cbr\u003e\nMessage me — I respond quickly and love helping customers get a great result.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nIf there's an issue with your file or print, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use only. This STL file may not be resold, redistributed, or shared in any form — digital or as printed objects — without written permission from MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you buy? Message me — I'm happy to confirm fit for your specific setup. If your print turns out great, a quick review goes a long way for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700072136940,"sku":"TEK-003-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7883696662_6bnu.jpg?v=1780504327"},{"product_id":"milwaukee-packout-swivel-socket-organizer-3d-printed-icon-59745-59747-3-8-sae-metric-impact-socket-tray-mechanic-gift","title":"Milwaukee Packout Swivel Socket Organizer 3D Printed Icon 59745 59747 3\/8 SAE Metric Impact Socket Tray Mechanic Gift","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed Icon 3\/8\" SAE+Metric swivel socket tray drops straight into your Milwaukee Packout — loaded, labeled, done.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\n \u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n \u003cbr\u003e\n- One (1) 3D printed socket tray for Icon 59745 SAE + 59747 Metric swivel impact socket sets\u003cbr\u003e\n- Holds 22 sockets total: 12 SAE (5\/16\"–1\") and 10 Metric (10mm–19mm)\u003cbr\u003e\n- Tray color: Black or Red\u003cbr\u003e\n- Label color: Red, Black, or White embossed\u003cbr\u003e\n- Select your color combination from the listing options before adding to cart\u003cbr\u003e\n- Embossed size labels molded directly into the tray — no stickers, no fading\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8436 (Low-Profile Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use the tray standalone in any drawer, or add the optional dovetail-locking grid frame to lock multiple trays into a perfectly aligned system (see shop)\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\n \u003cbr\u003e\nThis tray is designed specifically for two Icon sets.\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive SAE Impact Swivel Socket Set, 12-Piece (Item 59745 \/ 56695)\u003cbr\u003e\n- Sizes: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\", 13\/16\", 7\/8\", 15\/16\", 1\"\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive Metric Impact Swivel Socket Set, 10-Piece (Item 59747 \/ 56696)\u003cbr\u003e\n- Sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nNOT UNIVERSAL — Pockets are precision-sized for Icon swivel impact socket bodies. The design accounts for the larger swivel head diameter. Standard sockets or other brands may not fit correctly.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n \u003cbr\u003e\nPETG is a tough, heat-resistant plastic — oil and grease-resistant, and handles garage heat without warping.\u003cbr\u003e\n \u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\n \u003cbr\u003e\nSelect your combination from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nEvery tray is test-fit with actual Icon sockets before shipping. Surface texture (layer lines) is normal for 3D-printed parts and does not affect fit or function.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n \u003cbr\u003e\n✓ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✓ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✓ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✓ Tool chest grid system — optional dovetail-locking grid frames keep every tray aligned in any standard drawer (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✓ Swivel-head specific pocket sizing — pockets are dimensioned for the larger swivel head diameter. Standard sockets from other brands may not seat correctly\u003cbr\u003e\n✓ Sockets stay put during transport — pockets hold sockets through vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✓ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✓ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✓ Available in black or red — labels in red, black, or white\u003cbr\u003e\n✓ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n✓ Rigid structure — won't compress or tear like foam inserts\u003c\/p\u003e\u003cbr\u003e\n \n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Compact Low-Profile (48-22-8436), Low-Profile (48-22-8431), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching SAE and metric companion trays that fit together into a complete organized system.\u003cbr\u003e\n \u003cbr\u003e\nThe tapered base lets you nest trays in deeper organizers or stack them in any tool chest drawer. Think Gridfinity, but purpose-built for a real workshop.\u003cbr\u003e\n \u003cbr\u003e\nCheck my shop for matching companion trays that fit together into a complete, organized system.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\n \u003cbr\u003e\n- Automotive technicians and serious DIYers running Icon swivel impact sockets\u003cbr\u003e\n- Anyone using Milwaukee Packout who wants every socket in its place\u003cbr\u003e\n- A great gift for him, gift for Dad, or a shop upgrade they'll actually use\u003cbr\u003e\n- Birthdays, Father's Day, Christmas, or any occasion where the toolbox needs some love\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFREQUENTLY ASKED QUESTIONS\u003cbr\u003e\n \u003cbr\u003e\nQ: Does this fit both the SAE and metric Icon swivel socket sets?\u003cbr\u003e\nA: Yes — this is a combined tray for both sets. It holds all 12 SAE sockets (59745, 5\/16\"–1\") and all 10 metric sockets (59747, 10mm–19mm) in one tray.\u003cbr\u003e\n \u003cbr\u003e\nQ: Will standard (non-swivel) sockets fit?\u003cbr\u003e\nA: No — the pockets are sized for swivel impact sockets, which are larger at the swivel head. Standard sockets won't be held securely. This tray is specifically for the 59745\/59747 swivel sets.\u003cbr\u003e\n \u003cbr\u003e\nQ: Does the Packout lid close fully with the tray loaded?\u003cbr\u003e\nA: Yes. The tray is designed for full lid clearance on all four compatible Packout organizers — 48-22-8435, 48-22-8436, 48-22-8431, and 48-22-8430.\u003cbr\u003e\n \u003cbr\u003e\nQ: Can I choose the color?\u003cbr\u003e\nA: Yes — select your tray color (black or red) and label color (red, black, or white) from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nQ: Are the sockets included?\u003cbr\u003e\nA: No. This is for the tray only. Icon 59745 and 59747 sets are sold separately at Harbor Freight.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\n \u003cbr\u003e\nNeed a tray for a set not in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700072169708,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700072202476,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700072235244,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700072268012,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7860954691_p2cb.jpg?v=1780504329"},{"product_id":"milwaukee-packout-socket-organizer-3d-printed-tekton-3-8-sae-socket-tray-skt15101-mechanic-gift","title":"Milwaukee Packout Socket Organizer 3D Printed Tekton 3\/8\" SAE Socket Tray SKT15101 Mechanic Gift","description":"\u003cp\u003eStop hunting for the right SAE socket. This 3D printed Tekton 3\/8\" SAE socket tray drops straight into your Milwaukee Packout 48-22-8431 — every size from 1\/4\" to 1\", shallow and deep, labeled and ready.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 SAE socket tray — holds all 30 Tekton 3\/8\" SAE sockets (15 sizes, shallow + deep)\u003cbr\u003e\n  plus dedicated pockets for ratchet, extensions, and universal joint\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003cbr\u003e\n- Printed, inspected, and test-fit before shipping\u003c\/p\u003e\n\n\u003cp\u003eCASE COMPATIBILITY — IMPORTANT\u003cbr\u003e\n✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) ONLY\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit: 48-22-8436 (Compact Low-Profile) | 48-22-8430 (Organizer) | 48-22-8435 (Compact Organizer)\u003cbr\u003e\nBuyers with those cases should message before ordering.\u003c\/p\u003e\n\n\u003cp\u003eSIDE SELECTION — REQUIRED\u003cbr\u003e\nEach tray is designed for one specific side of the 48-22-8431 case. Stand in front of your Packout with the hinge facing away from you. Choose Left or Right in the personalization field.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nComplete sets (single purchase fills all 30 socket pockets + accessory pockets):\u003cbr\u003e\n  SKT15101 — 34pc, 6-point SAE 1\/4\"–1\" shallow + deep (includes ratchet + accessories)\u003cbr\u003e\n  SHD91209 — 30pc, 6-point SAE 1\/4\"–1\" shallow + deep\u003cbr\u003e\n  SHD91210 — 30pc, 12-point SAE 1\/4\"–1\" shallow + deep\u003c\/p\u003e\n\n\u003cp\u003eOr pair shallow + deep separately to fill all 30 socket pockets:\u003cbr\u003e\n  SHD91109 (6-pt shallow 15pc) + SHD91113 (6-pt deep 15pc)\u003cbr\u003e\n  SHD91111 (12-pt shallow 15pc) + SHD91115 (12-pt deep 15pc)\u003c\/p\u003e\n\n\u003cp\u003eAccessory pockets fit:\u003cbr\u003e\n  SRH11108 (ratchet) · SHA11103 (3\" ext) · SHA11106 (6\" ext) · SHA12101 (universal joint)\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL — Pockets are dimensioned specifically for Tekton 3\/8\" sockets.\u003cbr\u003e\nOther brands use different wall thicknesses and lengths and may not fit correctly.\u003cbr\u003e\nMessage before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eWant both SAE and Metric covered? See the complete SAE + Metric bundle and the Metric-only tray:\u003cbr\u003e\nhttps:\/\/www.etsy.com\/listing\/4483533111\u003cbr\u003e\nhttps:\/\/www.etsy.com\/listing\/4424033552\u003c\/p\u003e\n\n\u003cp\u003eDon't see what you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect color combination from purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines. Normal — no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ No-skip SAE coverage — every size from 1\/4\" to 1\", shallow and deep, with a dedicated labeled pocket for each\u003cbr\u003e\n✔ Fits 6-point AND 12-point Tekton sockets — both point styles share the same outer diameter; every compatible set above drops straight in\u003cbr\u003e\n✔ Dedicated pockets for ratchet, extensions, and universal joint (SAE tray)\u003cbr\u003e\n✔ Sockets stay put during transport — vertical carry, vehicle trips, accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Open-bottom pockets on largest sockets are intentional — socket retained from the sides\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a different socket set or a different Packout model? Message me with your brand, model number, and case — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific setup. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Left Tray \/ Black Top\/White Letter","offer_id":47700072300780,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Left Tray \/ Black Top\/Red Letter","offer_id":47700072333548,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Left Tray \/ Red Top\/Black Letter","offer_id":47700072366316,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Left Tray \/ Red Top\/White Letter","offer_id":47700072399084,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Black Top\/White Letter","offer_id":47700072431852,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Black Top\/Red Letter","offer_id":47700072464620,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Red Top\/Black Letter","offer_id":47700072497388,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Red Top\/White Letter","offer_id":47700072530156,"sku":"TEK-003-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7929646147_f84z.jpg?v=1780504330"},{"product_id":"bauer-modular-drawer-71125-icon-3-8-socket-tray-stl-files-sae-metric-harbor-freight-3d-print-files","title":"Bauer Modular Drawer 71125 Icon 3\/8 Socket Tray STL Files SAE Metric Harbor Freight 3D Print Files","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nWhen Harbor Freight announced the new modular drawer box for their storage system, I immediately wanted to move my Icon impact sockets over to it — it's a better fit in my truck than the Packout. The way they built the box, including the rivet placement, makes it a little more challenging to fit the tray, but once installed it's snug. This tray holds all of the 3\/8\" drive Icon standard and deep sockets in one place. Now you can print your own.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eStop hunting for the right socket. This ICON 3\/8\" SAE and metric impact socket tray drops straight into your Bauer Modular 71125 drawer — download the files, print them yourself, done.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL DOWNLOAD ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the digital STL files only. No physical tray will be shipped. After purchase, you'll receive an instant download link via Etsy — print it yourself on any 3D printer. Icon sockets and Bauer toolbox are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 3 STL files — instant download after purchase via Etsy:\u003cbr\u003e\n  · Socket tray (holds all 50 ICON 3\/8\" SAE and metric impact sockets)\u003cbr\u003e\n  · Rib spacer grid (keeps the tray level above the drawer floor ribs)\u003cbr\u003e\n  · Snap-in drawer label — slides into the built-in label slot on the Bauer 71125 drawer face; reads \"ICON 3\/8\" Drive Impact Sockets\"\u003cbr\u003e\n- Personal use license included\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR BAUER MODULAR 71125 — ONE DRAWER, ALL YOUR SOCKETS\u003cbr\u003e\n✔ Bauer Modular 2-Drawer Toolbox (SKU 71125) — tray drops straight in, drawer closes fully\u003cbr\u003e\n✔ Included spacer grid lifts the tray above the drawer's bottom ribs for a flush, stable fit\u003cbr\u003e\n✔ One tray fills one complete drawer — second drawer stays free\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray holds the complete ICON 3\/8\" Drive professional impact socket lineup across all four purchasable sets. Purchase all four to fill every pocket.\u003c\/p\u003e\n\n\u003cp\u003eSAE Standard (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59750 — ICON 3\/8\" Drive SAE Professional Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eSAE Deep (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59739 — ICON 3\/8\" Drive SAE Professional Deep Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 70432 — ICON 3\/8\" Drive Metric Professional Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 59756 — ICON 3\/8\" Drive Metric Professional Deep Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for ICON 3\/8\" professional impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eWant the printed version shipped to you? Find the printed version here:\u003cbr\u003e\nhttps:\/\/www.etsy.com\/listing\/4487923397\u003c\/p\u003e\n\n\u003cp\u003eNeed a different socket set or toolbox? Message me — I can usually design a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePRINT SPECS\u003cbr\u003e\nRecommended material: PETG — a tough, heat-resistant filament that handles garage heat and chemical exposure. PLA works for home use where heat and chemicals are not a concern.\u003cbr\u003e\nRecommended infill: 10–20% gyroid\u003cbr\u003e\nSupports required: No\u003cbr\u003e\nPrint orientation: Flat on bed, no rotation needed\u003cbr\u003e\nTested on: Creality K2 Plus, Ankermake M5C\u003c\/p\u003e\n\n\u003cp\u003eBed size and print time: The STL files are designed to be split in your slicer to fit your specific printer bed. Instructions are included — you choose how many pieces to cut the tray into based on your printer's build volume. Print time and filament use will vary based on your printer, material, layer height, and how many sections you cut. On a Creality K2 Plus at 0.2mm layer height with the tray split into two sections, expect roughly 24 hours of printing and approximately 600g of filament.\u003c\/p\u003e\n\n\u003cp\u003eNote on the spacer grid: Print at low infill (10–15%). It doesn't carry load — it just holds the tray level above the drawer ribs.\u003c\/p\u003e\n\n\u003cp\u003eNote on the drawer label: Designed for two-color printing — black base with red raised text. Single-color prints fine too — it still snaps in and functions perfectly.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Three-file system — tray + spacer grid + snap-in drawer label. Everything needed for a complete, labeled installation\u003cbr\u003e\n✔ Snap-in drawer label included — slides into the built-in Bauer label slot so you know what's in the drawer without opening it. No adhesive, no tools.\u003cbr\u003e\n✔ Slicer-splittable tray — cut the model into as many sections as your printer needs. No minimum bed size required.\u003cbr\u003e\n✔ One drawer, all 50 sockets — SAE and metric standard and deep, organized in one place\u003cbr\u003e\n✔ Recessed accessory storage — dedicated space at the back for extensions, adapters, and universal joints\u003cbr\u003e\n✔ Print in any color — match your toolbox or shop aesthetic\u003cbr\u003e\n✔ Precision fit for Bauer 71125 — designed and test-fit specifically for this drawer cavity\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed adjacent to every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ Large socket openings are by design — the largest sockets require a pocket that goes through the tray floor. The socket is retained securely from the sides.\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system — precision-fit trays designed around the tools you actually own, for the storage systems you actually use. Check my shop for other socket tray configurations and adapter frames.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run ICON 3\/8\" impact tools and want every socket organized in their Bauer Modular system. A great self-print project or gift for someone with a 3D printer — print it in their favorite color before giving. Ideal for birthdays, Father's Day, or any occasion where the toolbox needs a real upgrade.\u003c\/p\u003e\n\n\u003cp\u003eFREQUENTLY ASKED QUESTIONS\u003c\/p\u003e\n\n\u003cp\u003eIs this a physical product?\u003cbr\u003e\nNo — digital download only. You receive STL files to print yourself. Nothing is shipped. You'll get an instant download link via Etsy immediately after purchase.\u003c\/p\u003e\n\n\u003cp\u003eWhat files are included?\u003cbr\u003e\nThree STL files: the socket tray, the rib spacer grid, and the snap-in drawer label. All three are needed for a complete installation.\u003c\/p\u003e\n\n\u003cp\u003eWhat does the spacer grid do?\u003cbr\u003e\nThe Bauer 71125 drawer has raised ribs molded into the floor. Without a spacer, an insert tray would rock on those ribs. The spacer grid sits below the socket tray, fills that gap, and keeps the tray level and stable.\u003c\/p\u003e\n\n\u003cp\u003eWhat does the drawer label do?\u003cbr\u003e\nThe Bauer 71125 has a built-in label slot on the drawer face. The included label STL snaps directly into that slot — no adhesive, no hardware. Designed for two-color printing (black base, red raised text) but works fine in a single color too.\u003c\/p\u003e\n\n\u003cp\u003eWhat size printer do I need?\u003cbr\u003e\nAny FDM printer — the tray STL is designed to be split in your slicer into as many sections as your bed requires. Instructions are included. Tested on Creality K2 Plus and Ankermake M5C.\u003c\/p\u003e\n\n\u003cp\u003eHow long does it take to print?\u003cbr\u003e\nIt depends on your printer, material, layer height, and how many sections you cut the tray into. On a Creality K2 Plus at 0.2mm layer height split into two sections, expect roughly 24 hours and about 600g of filament. Faster printers or higher layer heights will reduce this significantly.\u003c\/p\u003e\n\n\u003cp\u003eWhat material should I use?\u003cbr\u003e\nPETG is recommended — it's a tough, heat-resistant material that handles garage heat and chemical exposure. PLA works fine for home workshop use.\u003c\/p\u003e\n\n\u003cp\u003eWill the sockets stay put?\u003cbr\u003e\nYes — pockets are dimensioned to hold ICON 3\/8\" impact sockets securely during vertical carry, vehicle transport, and accidental drops.\u003c\/p\u003e\n\n\u003cp\u003eCan I sell printed copies of this file?\u003cbr\u003e\nNo — personal use only. Printed items may not be sold, shared, or distributed. See license section below.\u003c\/p\u003e\n\n\u003cp\u003eWill it fit my [other brand] sockets?\u003cbr\u003e\nThis tray is designed specifically for ICON 3\/8\" professional impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me with your brand and model number before purchasing.\u003c\/p\u003e\n\n\u003cp\u003eCan I get a custom version for my socket set?\u003cbr\u003e\nYes — message me with your brand and model number. I can usually design and provide a custom file.\u003c\/p\u003e\n\n\u003cp\u003ePrint questions?\u003cbr\u003e\nMessage me — I respond quickly and love helping customers get a great result.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a different socket set or a different Harbor Freight drawer? Message me with the details — I can usually design and provide a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nThis is a digital file — no refunds after download. If you have questions about fit or print settings, message me before purchasing. I'm happy to help.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — this is intentional precision design, not a defect.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use only. These STL files may not be resold, redistributed, or shared in any form — digital or as printed objects — without written permission from MountaineerMaker. One license per purchase. Printed items made from these files may not be sold commercially.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you buy? Message me — I'm happy to confirm fit or answer print questions before you purchase. If your print turns out great, a quick review goes a long way for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700072595692,"sku":"BAU-001-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7920574304_4805.jpg?v=1780504332"},{"product_id":"milwaukee-packout-socket-organizer-3d-printed-tekton-3-8-metric-socket-tray-shd91211-mechanic-gift","title":"Milwaukee Packout Socket Organizer 3D Printed Tekton 3\/8\" Metric Socket Tray SHD91211 Mechanic Gift","description":"\u003cp\u003eStop hunting for the right metric socket. This 3D printed Tekton 3\/8\" metric socket tray drops straight into your Milwaukee Packout 48-22-8431 — every size from 6mm to 24mm, shallow and deep, labeled and ready.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 Metric socket tray — holds all 38 Tekton 3\/8\" metric sockets (19 sizes, shallow + deep)\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003cbr\u003e\n- Printed, inspected, and test-fit before shipping\u003c\/p\u003e\n\n\u003cp\u003eCASE COMPATIBILITY — IMPORTANT\u003cbr\u003e\n✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) ONLY\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit: 48-22-8436 (Compact Low-Profile) | 48-22-8430 (Organizer) | 48-22-8435 (Compact Organizer)\u003cbr\u003e\nBuyers with those cases should message before ordering.\u003c\/p\u003e\n\n\u003cp\u003eSIDE SELECTION — REQUIRED\u003cbr\u003e\nEach tray is designed for one specific side of the 48-22-8431 case. Stand in front of your Packout with the hinge facing away from you. Choose Left or Right in the personalization field.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nComplete sets (single purchase fills all 38 metric socket pockets):\u003cbr\u003e\n  SHD91211 — 38pc, 6-point metric 6–24mm shallow + deep\u003cbr\u003e\n  SHD91212 — 38pc, 12-point metric 6–24mm shallow + deep\u003c\/p\u003e\n\n\u003cp\u003eOr pair shallow + deep separately to fill all 38 metric socket pockets:\u003cbr\u003e\n  SHD91110 (6-pt shallow 19pc) + SHD91114 (6-pt deep 19pc)\u003cbr\u003e\n  SHD91112 (12-pt shallow 19pc) + SHD91116 (12-pt deep 19pc)\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL — Pockets are dimensioned specifically for Tekton 3\/8\" sockets.\u003cbr\u003e\nOther brands use different wall thicknesses and lengths and may not fit correctly.\u003cbr\u003e\nMessage before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eWant both SAE and Metric covered? See the complete SAE + Metric bundle and the SAE-only tray:\u003cbr\u003e\nSAE: https:\/\/www.etsy.com\/listing\/4483535264\u003cbr\u003e\nCombination Set: https:\/\/www.etsy.com\/listing\/4424033552\u003c\/p\u003e\n\n\u003cp\u003eDon't see what you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect color combination from purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines. Normal — no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ No-skip metric coverage — every size from 6mm to 24mm, shallow and deep, with a dedicated labeled pocket for each\u003cbr\u003e\n✔ Fits 6-point AND 12-point Tekton sockets — both point styles share the same outer diameter; every compatible set above drops straight in\u003cbr\u003e\n✔ Dedicated pockets for ratchet, extensions, and universal joint (SAE tray)\u003cbr\u003e\n✔ Sockets stay put during transport — vertical carry, vehicle trips, accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Open-bottom pockets on largest sockets are intentional — socket retained from the sides\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a different socket set or a different Packout model? Message me with your brand, model number, and case — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific setup. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Left Tray \/ Black Top\/White Letter","offer_id":47700072628460,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Left Tray \/ Black Top\/Red Letter","offer_id":47700072661228,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Left Tray \/ Red Top\/Black Letter","offer_id":47700072693996,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Left Tray \/ Red Top\/White Letter","offer_id":47700072726764,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Black Top\/White Letter","offer_id":47700072759532,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Black Top\/Red Letter","offer_id":47700072792300,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Red Top\/Black Letter","offer_id":47700072825068,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Right Tray \/ Red Top\/White Letter","offer_id":47700072857836,"sku":"TEK-004-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7882094308_ayps.jpg?v=1780504333"},{"product_id":"bauer-modular-drawer-71125-icon-socket-organizer-3d-printed-3-8-sae-metric-complete-harbor-freight-impact-socket-tray-mechanic-gift","title":"Bauer Modular Drawer 71125 Icon Socket Organizer 3D Printed 3\/8 SAE Metric Complete Harbor Freight Impact Socket Tray Mechanic Gift","description":"\u003cp\u003ePrecision-fit tray for the complete ICON 3\/8\" SAE and metric professional impact socket lineup — all 50 sockets from all 4 sets, organized in one drawer of your Bauer Modular box 71125.\u003c\/p\u003e\n\n\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nWhen Harbor Freight announced the new modular drawer box for their storage system, I immediately wanted to move my Icon impact sockets over to it, since it's a better fit in my truck than the packout. The way they built the box, such as the rivet placement, makes it a little more challenging to fit the tray, but once installed, it's snug. This tray holds all of the 3\/8\" drive Icon std and deep sockets in one place.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Bauer toolbox are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG multipiece socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 50 ICON 3\/8\" professional impact sockets from the complete SAE + Metric lineup:\u003cbr\u003e\n  · 12 SAE standard (5\/16\"–1\") from ICON 59750\u003cbr\u003e\n  · 12 SAE deep (5\/16\"–1\") from ICON 59739\u003cbr\u003e\n  · 13 metric standard (7mm–19mm) from ICON 70432\u003cbr\u003e\n  · 13 metric deep (7mm–19mm) from ICON 59756\u003cbr\u003e\n- Recessed storage area at the back of the tray for extensions, adapters, and accessories\u003cbr\u003e\n- Size labels are embossed directly adjacent to every pocket\u003cbr\u003e\n- Replaces 2 separate Packout trays with one organized solution\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR BAUER MODULAR 71125 — ONE DRAWER, ALL YOUR SOCKETS\u003cbr\u003e\n✔ Bauer Modular 2-Drawer Toolbox (SKU 71125) — drops straight in, drawer closes fully\u003cbr\u003e\n✔ One tray fills one complete drawer\u003cbr\u003e\n✔ Second drawer stays free for additional tools, accessories, or a second tray\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed to hold the complete ICON 3\/8\" Drive professional impact socket lineup across all four purchasable sets. Purchase all four sets to fill every pocket.\u003c\/p\u003e\n\n\u003cp\u003eSAE Standard (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59750 — ICON 3\/8\" Drive SAE Professional Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eSAE Deep (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59739 — ICON 3\/8\" Drive SAE Professional Deep Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 70432 — ICON 3\/8\" Drive Metric Professional Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 59756 — ICON 3\/8\" Drive Metric Professional Deep Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for ICON 3\/8\" professional impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eDon't see the set you need? Message me — I can design and print a custom tray for your exact socket lineup. These new Bauer drawers open up a lot of storage possibilities.\u003c\/p\u003e \n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ One drawer, all 50 sockets — replaces the 2 separate trays previously needed to organize the complete ICON 3\/8\" lineup\u003cbr\u003e\n✔ Recessed accessory storage — dedicated space at the back of the tray keeps extensions, adapters, and universal joints organized alongside the sockets\u003cbr\u003e\n✔ Precision-fit for the Bauer 71125 — designed and test-fit specifically for the Bauer Modular 2-Drawer Toolbox drawer cavity\u003cbr\u003e\n✔ SAE and metric together — one tray holds the complete professional impact lineup, not just one set\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed adjacent to every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: the largest sockets require an opening that goes all the way through the tray floor. The socket is retained securely from the sides.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system — precision-fit trays designed around the tools you actually own, for the storage systems you actually use. Check my shop for other socket tray configurations and adapter frames.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run ICON 3\/8\" impact tools and want every socket organized and at hand in their Bauer Modular system. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a serious upgrade.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set or toolbox not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific setup. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700072890604,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700072923372,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700072956140,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700072988908,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7955820983_eez9.jpg?v=1780504335"},{"product_id":"stl-file-sae-milwaukee-impact-socket-organizer-for-packout-low-profile-3-8-drive-no-skip","title":"STL File - SAE Milwaukee Impact Socket Organizer for Packout Low Profile, 3\/8\" Drive No-Skip","description":"\u003cp\u003eDigital STL file for a 3D-printable organizer tray designed specifically for Milwaukee 3\/8” drive SAE impact sockets.\u003c\/p\u003e\n\n\u003cp\u003eThis file allows you to print your own precision-fit tray for the Milwaukee Packout Low-Profile Organizers (48-22-8431 or 48-22-8436).\u003c\/p\u003e\n\n\u003cp\u003eNo physical item will be shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS FILE FITS\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee Packout Low-Profile Organizers\u003cbr\u003e\n• 48-22-8431\u003cbr\u003e\n• 48-22-8436\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee 3\/8” Drive SAE Impact Sockets\u003cbr\u003e\n• 1\/4\" – 1\"\u003cbr\u003e\n• Deep and shallow\u003c\/p\u003e\n\n\u003cp\u003eEach socket size has a clearly labeled, dedicated location.\u003cbr\u003e\nNo skipped sizes. No wasted space.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ Not universal. This model is dimensioned specifically for Milwaukee 3\/8” SAE impact sockets. Other brands may use different wall thicknesses and lengths and may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003eCAPACITY\u003c\/p\u003e\n\n\u003cp\u003eSAE Set Capacity\u003cbr\u003e\n• 30 total sockets\u003cbr\u003e\n– 15 sizes\u003cbr\u003e\n– Deep and shallow for each size\u003c\/p\u003e\n\n\u003cp\u003eIncludes additional storage areas for common accessories such as:\u003cbr\u003e\n• 3\/8\" impact adaptor\u003cbr\u003e\n• Extensions\u003cbr\u003e\n• Universal \/ swivel\u003c\/p\u003e\n\n\u003cp\u003eThis file is for the SAE side only.\u003c\/p\u003e\n\n\u003cp\u003eFILE DETAILS\u003c\/p\u003e\n\n\u003cp\u003e• STL format\u003cbr\u003e\n• Single-piece full-size tray\u003cbr\u003e\n• Designed to print without assembly or glue\u003c\/p\u003e\n\n\u003cp\u003eRecommended Materials\u003cbr\u003e\n• PETG (preferred for heat resistance and durability)\u003cbr\u003e\n• PLA+ (acceptable for climate-controlled storage)\u003c\/p\u003e\n\n\u003cp\u003eRecommended Settings\u003cbr\u003e\n• 0.2mm layer height\u003cbr\u003e\n• 3–4 walls\u003cbr\u003e\n• 15–20% infill (gyroid or grid recommended)\u003c\/p\u003e\n\n\u003cp\u003eDesigned to fully close the Packout lid without interference.\u003c\/p\u003e\n\n\u003cp\u003eIMPORTANT NOTES\u003c\/p\u003e\n\n\u003cp\u003e• This is a digital download only\u003cbr\u003e\n• No printed tray will be shipped\u003cbr\u003e\n• No sockets or Packout case included\u003cbr\u003e\n• Proper printer calibration is required for best fit\u003c\/p\u003e\n\n\u003cp\u003e3D printing results depend on machine tuning, filament selection, and slicer settings. Minor dimensional tuning may be necessary depending on your printer.\u003c\/p\u003e\n\n\u003cp\u003eABOUT THE DESIGN\u003c\/p\u003e\n\n\u003cp\u003e• Clear embossed size labels\u003cbr\u003e\n• Retention geometry designed for vertical transport\u003cbr\u003e\n• Rigid structure — no foam compression\u003cbr\u003e\n• Jobsite-ready design\u003c\/p\u003e\n\n\u003cp\u003eModel was dimensioned using real Milwaukee SAE impact sockets.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003c\/p\u003e\n\n\u003cp\u003eThis file is for personal use only.\u003c\/p\u003e\n\n\u003cp\u003eYou may print it for yourself or as a gift.\u003cbr\u003e\nYou may not resell, redistribute, or share the STL file in any form.\u003c\/p\u003e\n\n\u003cp\u003eIf you are interested in a commercial license, please contact us.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM REQUESTS\u003c\/p\u003e\n\n\u003cp\u003eIf you use a different socket brand or want a tray for another Packout model, feel free to message us.\u003c\/p\u003e\n\n\u003cp\u003eWe’re open to:\u003cbr\u003e\n• Custom variations\u003cbr\u003e\n• Other brands\u003cbr\u003e\n• Suggestions for future organizers\u003c\/p\u003e\n\n\u003cp\u003eSUMMARY (Quick Scan)\u003c\/p\u003e\n\n\u003cp\u003e✓ Digital STL file – no physical item\u003cbr\u003e\n✓ Fits Milwaukee Packout Low-Profile (48-22-8431 \/ 48-22-8436)\u003cbr\u003e\n✓ Designed for Milwaukee 3\/8” SAE impact sockets\u003cbr\u003e\n✓ Holds 1\/4\"–1\" deep \u0026amp; shallow (30 sockets)\u003cbr\u003e\n✓ Single-piece printable design\u003cbr\u003e\n✓ Milwaukee-specific – not universal\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700073316588,"sku":"MIL-002-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7749075979_jno5.jpg?v=1780504340"},{"product_id":"stl-file-metric-milwaukee-impact-socket-organizer-for-packout-low-profile-3-8-drive-no-skip","title":"STL File - Metric Milwaukee Impact Socket Organizer for Packout Low Profile, 3\/8\" Drive No-Skip","description":"\u003cp\u003eDigital STL file for a 3D-printable organizer tray designed specifically for Milwaukee 3\/8” drive metric impact sockets.\u003c\/p\u003e\n\n\u003cp\u003eThis file allows you to print your own precision-fit tray for the Milwaukee Packout Low-Profile Organizers (48-22-8431 or 48-22-8436).\u003c\/p\u003e\n\n\u003cp\u003eNo physical item will be shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS FILE FITS\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee Packout Low-Profile Organizers\u003cbr\u003e\n• 48-22-8431\u003cbr\u003e\n• 48-22-8436\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee 3\/8” Drive Metric Impact Sockets\u003cbr\u003e\n• 6mm – 24mm\u003cbr\u003e\n• Deep and shallow\u003c\/p\u003e\n\n\u003cp\u003eEach socket size has a clearly labeled, dedicated location.\u003cbr\u003e\nNo filler slots. No wasted space.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ Not universal. This model is dimensioned specifically for Milwaukee 3\/8” metric impact sockets. Other brands use different wall thicknesses and lengths and may not fit properly.\u003c\/p\u003e\n\n\u003cp\u003eCAPACITY\u003c\/p\u003e\n\n\u003cp\u003eMetric Set Capacity\u003cbr\u003e\n• 38 total sockets\u003cbr\u003e\n– 19 sizes\u003cbr\u003e\n– Deep and shallow for each size\u003c\/p\u003e\n\n\u003cp\u003eThis file is for the Metric side only.\u003c\/p\u003e\n\n\u003cp\u003eFILE DETAILS\u003c\/p\u003e\n\n\u003cp\u003e• STL format\u003cbr\u003e\n• Single-piece full-size tray\u003cbr\u003e\n• Designed to print without assembly or gluing\u003c\/p\u003e\n\n\u003cp\u003eRecommended Materials\u003cbr\u003e\n• PETG (preferred for heat resistance and durability)\u003cbr\u003e\n• PLA+ (acceptable for controlled environments)\u003c\/p\u003e\n\n\u003cp\u003eRecommended Settings\u003cbr\u003e\n• 0.2mm layer height\u003cbr\u003e\n• 3–4 walls\u003cbr\u003e\n• 15–20% infill (gyroid or grid recommended)\u003c\/p\u003e\n\n\u003cp\u003eDesigned to fully close the Packout lid without interference.\u003c\/p\u003e\n\n\u003cp\u003eIMPORTANT NOTES\u003c\/p\u003e\n\n\u003cp\u003e• This is a digital download only\u003cbr\u003e\n• No printed tray will be shipped\u003cbr\u003e\n• No sockets or Packout case included\u003cbr\u003e\n• You are responsible for proper printer calibration and material selection\u003c\/p\u003e\n\n\u003cp\u003e3D printing results depend on machine tuning, filament choice, and slicer settings. Minor dimensional adjustments may be required depending on your printer.\u003c\/p\u003e\n\n\u003cp\u003eABOUT THE DESIGN\u003c\/p\u003e\n\n\u003cp\u003e• Clear embossed size labels\u003cbr\u003e\n• Tight retention fit for vertical transport\u003cbr\u003e\n• Rigid structure — no foam compression\u003cbr\u003e\n• Jobsite-ready geometry\u003c\/p\u003e\n\n\u003cp\u003eModel was dimensioned using real Milwaukee metric impact sockets.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003c\/p\u003e\n\n\u003cp\u003eThis file is for personal use only.\u003c\/p\u003e\n\n\u003cp\u003eYou may print it for yourself or as a gift.\u003cbr\u003e\nYou may not resell, redistribute, or share the STL file in any form.\u003c\/p\u003e\n\n\u003cp\u003eIf you are interested in a commercial license, please contact us.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM REQUESTS\u003c\/p\u003e\n\n\u003cp\u003eIf you use a different socket brand or need a variation, feel free to message us.\u003c\/p\u003e\n\n\u003cp\u003eWe are open to:\u003cbr\u003e\n• Custom sizing\u003cbr\u003e\n• Other Packout models\u003cbr\u003e\n• Additional tray designs\u003c\/p\u003e\n\n\u003cp\u003eSUMMARY (Quick Scan)\u003c\/p\u003e\n\n\u003cp\u003e✓ Digital STL file – no physical item\u003cbr\u003e\n✓ Fits Milwaukee Packout Low-Profile (48-22-8431 \/ 48-22-8436)\u003cbr\u003e\n✓ Designed for Milwaukee 3\/8” metric impact sockets\u003cbr\u003e\n✓ Holds 6mm–24mm deep \u0026amp; shallow (38 sockets)\u003cbr\u003e\n✓ Single-piece printable design\u003cbr\u003e\n✓ Milwaukee-specific – not universal\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700073480428,"sku":"MIL-003-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7620314224_e3kz_2955340b-6836-4819-998a-7c5e32beedfc.jpg?v=1780504342"},{"product_id":"3d-printed-icon-59745-59747-3-8-sae-metric-swivel-socket-tray-milwaukee-packout-48-22-8431-48-22-8435-48-22-8436-48-22-8430","title":"3D Printed Icon 59745\/59747 3\/8\" SAE+Metric Swivel Socket Tray - Milwaukee Packout 48-22-8431 \/ 48-22-8435 \/ 48-22-8436 \/ 48-22-8430","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed Icon 3\/8\" SAE+Metric swivel socket tray drops straight into your Milwaukee Packout — loaded, labeled, done.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\n \u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n \u003cbr\u003e\n- One (1) 3D printed socket tray for Icon 59745 SAE + 59747 Metric swivel impact socket sets\u003cbr\u003e\n- Holds 22 sockets total: 12 SAE (5\/16\"–1\") and 10 Metric (10mm–19mm)\u003cbr\u003e\n- Tray color: Black or Red\u003cbr\u003e\n- Label color: Red, Black, or White embossed\u003cbr\u003e\n- Select your color combination from the listing options before adding to cart\u003cbr\u003e\n- Embossed size labels molded directly into the tray — no stickers, no fading\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n \u003cbr\u003e\n✓ 48-22-8435 (Low-Profile Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✓ 48-22-8436 (Low-Profile Small Parts Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✓ 48-22-8431 (Large Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✓ 48-22-8430 (Drawer Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✓ Standard tool chest — use with the optional dovetail-locking grid frame (see shop)\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\n \u003cbr\u003e\nThis tray is designed specifically for two Icon sets.\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive SAE Impact Swivel Socket Set, 12-Piece (Item 59745 \/ 56695)\u003cbr\u003e\n- Sizes: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\", 13\/16\", 7\/8\", 15\/16\", 1\"\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive Metric Impact Swivel Socket Set, 10-Piece (Item 59747 \/ 56696)\u003cbr\u003e\n- Sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nNOT UNIVERSAL — Pockets are precision-sized for Icon swivel impact socket bodies. The design accounts for the larger swivel head diameter. Standard sockets or other brands may not fit correctly.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n \u003cbr\u003e\nPETG is a tough, heat-resistant plastic — oil and grease-resistant, and handles garage heat without warping.\u003cbr\u003e\n \u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\n \u003cbr\u003e\nSelect your combination from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nEvery tray is test-fit with actual Icon sockets before shipping. Surface texture (layer lines) is normal for 3D-printed parts and does not affect fit or function.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n \u003cbr\u003e\n✓ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✓ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✓ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✓ Tool chest grid system — optional dovetail-locking grid frames keep every tray aligned in any standard drawer (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✓ Swivel-head specific pocket sizing — pockets are dimensioned for the larger swivel head diameter. Standard sockets from other brands may not seat correctly\u003cbr\u003e\n✓ Sockets stay put during transport — pockets hold sockets through vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✓ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✓ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✓ Available in black or red — labels in red, black, or white\u003cbr\u003e\n✓ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n✓ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Compact Low-Profile (48-22-8436), Low-Profile (48-22-8431), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching SAE and metric companion trays that fit together into a complete organized system.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\n \u003cbr\u003e\n- Automotive technicians and serious DIYers running Icon swivel impact sockets\u003cbr\u003e\n- Anyone using Milwaukee Packout who wants every socket in its place\u003cbr\u003e\n- A great gift for him, gift for Dad, or a shop upgrade they'll actually use\u003cbr\u003e\n- Birthdays, Father's Day, Christmas, or any occasion where the toolbox needs some love\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFREQUENTLY ASKED QUESTIONS\u003cbr\u003e\n \u003cbr\u003e\nQ: Does this fit both the SAE and metric Icon swivel socket sets?\u003cbr\u003e\nA: Yes — this is a combined tray for both sets. It holds all 12 SAE sockets (59745, 5\/16\"–1\") and all 10 metric sockets (59747, 10mm–19mm) in one tray.\u003cbr\u003e\n \u003cbr\u003e\nQ: Will standard (non-swivel) sockets fit?\u003cbr\u003e\nA: No — the pockets are sized for swivel impact sockets, which are larger at the swivel head. Standard sockets won't be held securely. This tray is specifically for the 59745\/59747 swivel sets.\u003cbr\u003e\n \u003cbr\u003e\nQ: Does the Packout lid close fully with the tray loaded?\u003cbr\u003e\nA: Yes. The tray is designed for full lid clearance on all four compatible Packout organizers — 48-22-8435, 48-22-8436, 48-22-8431, and 48-22-8430.\u003cbr\u003e\n \u003cbr\u003e\nQ: Can I choose the color?\u003cbr\u003e\nA: Yes — select your tray color (black or red) and label color (red, black, or white) from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nQ: Are the sockets included?\u003cbr\u003e\nA: No. This is for the tray only. Icon 59745 and 59747 sets are sold separately at Harbor Freight.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\n \u003cbr\u003e\nNeed a tray for a set not in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700073545964,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700073578732,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700073611500,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700073644268,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7933542285_dygj.jpg?v=1780504343"},{"product_id":"icon-3-8-drive-metric-sae-and-swivel-impact-socket-tray-set-for-packout-organizers","title":"Icon 3\/8\" Drive Metric, SAE, and Swivel Impact Socket Tray Set for Packout Organizers","description":"\u003cp\u003eMilwaukee Packout Socket Organizer Set – 3\/8\" Harbor Freight Impact Sockets (SAE, Metric, Swivel, Deep and Standard)\u003c\/p\u003e\n\n\u003cp\u003e3D-printed, single-piece PETG (tough, heat-resistant material) organizer trays designed specifically for Harbor Freight Icon 3\/8\" drive impact sockets, precision-fit for the Milwaukee Packout Organizers (48-22-8430, 48-22-8431, 48-22-8435, or 48-22-8436).\u003c\/p\u003e\n\n\u003cp\u003eSquare design to accommodate storage in standard tool chest drawers as well.\u003c\/p\u003e\n\n\u003cp\u003eEvery socket has a dedicated, clearly labeled location — no filler slots, no wasted space, and no rattling during transport.\u003c\/p\u003e\n\n\u003cp\u003eOrganizer trays only. Tools and Packout case not included.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS FITS\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee Packout\u003cbr\u003e\n• 48-22-8430\u003cbr\u003e\n• 48-22-8431\u003cbr\u003e\n• 48-22-8435\u003cbr\u003e\n• 48-22-8436\u003c\/p\u003e\n\n\u003cp\u003eHarbor Freight Icon 3\/8\" Drive Impact Sockets\u003cbr\u003e\n• SAE: 5\/16\" – 1\" (deep and shallow) I2SS-12 59750\/56206  and I2DS-12 59739\/56207 \u003cbr\u003e\n• Metric: 7mm – 19mm (deep and shallow) I2SM-13 70432,56209 and I2DM-13 59756, 56208\u003cbr\u003e\n• SAE Swivel: 5\/16\" – 1\" I2US-12 59745\/56695\u003cbr\u003e\n• Metric Swivel: 10mm - 19mm I2UM-10 59747, 56696\u003c\/p\u003e\n\n\u003cp\u003eDesigned so every socket size has a specific, labeled location — no skipped sizes and no unused pockets.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ Not universal. These trays are dimensioned specifically for Harbor Freight Icon 3\/8\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCAPACITY\u003c\/p\u003e\n\n\u003cp\u003e• Additional storage for common accessories such as:\u003cbr\u003e\n– Ratchets\u003cbr\u003e\n– Extensions\u003cbr\u003e\n– Universal \/ swivel\u003c\/p\u003e\n\n\u003cp\u003eInterchangeable Configurations\u003cbr\u003e\n• SAE or Metric\u003cbr\u003e\n• Fits the left or right side of the dual organizer\u003cbr\u003e\n• Fits both shallow and deep organizers\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCONFIGURATION OPTIONS\u003c\/p\u003e\n\n\u003cp\u003eComplete Set – $165\u003cbr\u003e\n• Includes SAE tray, Metric tray, Swivel tray (both SAE and Metric)\u003cbr\u003e\n• Also includes spacer storage trays required for the deep organizers\u003cbr\u003e\n• The entire set fits into 48-22-8430\u003cbr\u003e\n---\u003c\/p\u003e\n\n\u003cp\u003eDESIGN \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\n\u003cp\u003e• Single-piece, full-size print\u003cbr\u003e\n• No glued sections or bonded parts\u003c\/p\u003e\n\n\u003cp\u003e• Printed in PETG — a tough, heat-resistant material:\u003cbr\u003e\n– More impact-resistant than PLA\u003cbr\u003e\n– Better heat tolerance for vehicle storage\u003cbr\u003e\n– Oil and grease resistant\u003cbr\u003e\n– Will not soften or warp in hot vehicles like PLA\u003c\/p\u003e\n\n\u003cp\u003e• Socket pockets are designed to retain sockets during transport, including:\u003cbr\u003e\n– Vertical carry\u003cbr\u003e\n– Vehicle movement\u003cbr\u003e\n– Accidental drops\u003c\/p\u003e\n\n\u003cp\u003e• Clear, printed size labels\u003cbr\u003e\n• Rigid structure — does not compress or tear like foam\u003cbr\u003e\n• Designed to fully close the Packout lid without interference\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed, inspected, and test-fit using real Harbor Freight Icon impact sockets before shipping.\u003c\/p\u003e\n\n\u003cp\u003eMade in West Virginia, USA.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eABOUT 3D PRINTING SURFACE FINISH\u003c\/p\u003e\n\n\u003cp\u003eThese organizers are produced using professional-grade 3D printing. Unlike injection-molded plastic, 3D-printed parts may show minor surface characteristics that are normal for the process.\u003c\/p\u003e\n\n\u003cp\u003e• Visible layer lines and slight texture variations are normal\u003cbr\u003e\n• Small cosmetic marks or surface inconsistencies may be present\u003cbr\u003e\n• These do not affect strength, fit, or function\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed for durability and real-world jobsite use — appearance may vary slightly from tray to tray, but performance remains consistent.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSTL FILES ALSO AVAILABLE\u003c\/p\u003e\n\n\u003cp\u003eIf you prefer to print your own trays, digital STL files are available for purchase in our shop.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for fully printed, ready-to-use organizers — no printing, tuning, or test-fitting required.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eOTHER BRANDS OR CUSTOM REQUESTS\u003c\/p\u003e\n\n\u003cp\u003eThese trays are designed for Harbor Freight Icon 3\/8\" impact sockets only.\u003c\/p\u003e\n\n\u003cp\u003eIf you use a different socket brand or want a tray for another Packout model, feel free to message us. We're open to:\u003cbr\u003e\n• Custom designs\u003cbr\u003e\n• Individual Trays\u003cbr\u003e\n• Other socket brands\u003cbr\u003e\n• Suggestions for future organizers\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSHIPPING\u003c\/p\u003e\n\n\u003cp\u003e• Made to order\u003cbr\u003e\n• Ships in 3–5 business days\u003cbr\u003e\n• Carefully packaged to prevent damage during transit\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700073677036,"sku":"ICN-003-PHY","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7857590745_i7ag.jpg?v=1780504345"},{"product_id":"custom-stl-file-milwaukee-packout-low-profile-compact-organizer-for-tekton-3-8-metric-deep-and-shallow-sockets","title":"Custom STL File: Milwaukee Packout Low-Profile Compact Organizer for Tekton 3\/8 Metric Deep and Shallow Sockets","description":"\u003cp\u003eCustomized STL File for Milwaukee Compact Packout Low Profile Organizer 48-22-8436 for 3\/8 metric Tekton 6 and 12-point deep and shallow socket sets.\u003c\/p\u003e\n\n\u003cp\u003eCreate a customized organizer insert for your Milwaukee Packout 48-22-8436 with this custom STL file.\u003c\/p\u003e \n\n\u003cp\u003eFeatures:\u003cbr\u003e\nDesigned specifically for Milwaukee Packout Organizer 48-22-8436.\u003cbr\u003e\nCustomized layout to hold the Tekton 3\/8\" 6 and 12-point metric socket sets.\u003cbr\u003e\nThe layout is designed to keep all sockets in place when the lid is latched, and the organizer is carried by the handle.\u003c\/p\u003e\n\n\u003cp\u003eHigh-quality STL file for 3D printing\u003cbr\u003e\nEasy to modify to fit your unique requirements\u003cbr\u003e\nThe STL is broken into four modules to allow printing on a 220mm x 220mm bed.\u003cbr\u003e\nThe modules feature interlocking connections that allow them to slide together securely.\u003c\/p\u003e\n\n\u003cp\u003eCompatibility:\u003cbr\u003e\nCompatible with Milwaukee Packout Organizer 48-22-8436 (not included)\u003cbr\u003e\nCustomized layout to fit the following Tekton 3\/8 6-point socket sets (not included)\u003cbr\u003e\nSHD91110 3\/8\" drive 6-point metric 19pc 6-24mm shallow\u003cbr\u003e\nSHD91114 3\/8\" drive 6-point metric 19pc 6-24mm deep\u003cbr\u003e\nSHD91112 3\/8\" drive 12-point metric 19pc 6-24mm shallow\u003cbr\u003e\nSHD91116 3\/8\" drive 12-point metric 19pc 6-24mm deep\u003cbr\u003e\nSHD91211 3\/8\" drive 6-point metric 38pc 6-24mm deep \u0026amp; shallow\u003cbr\u003e\nSHD91212 3\/8\" drive 12-point metric 38pc 6-24mm deep \u0026amp; shallow\u003c\/p\u003e\n\n\u003cp\u003eHow to Use:\u003cbr\u003e\nDownload the ZIP file.\u003cbr\u003e\nDecompress the ZIP file to expose the STL file.\u003cbr\u003e\nImport and customize the design using your preferred 3D modeling software.\u003cbr\u003e\nPrint the insert using a 3D printer.\u003cbr\u003e\nEnjoy a customized organizer insert for your Milwaukee Packout Low Profile Compact organizer!\u003c\/p\u003e\n\n\u003cp\u003eNote:\u003cbr\u003e\nThis listing is for a digital STL file only. No physical item will be shipped.\u003cbr\u003e\n3D printing and assembly are required.\u003cbr\u003e\nThis STL file is for personal use only and may not be shared, resold, or distributed in any form without explicit permission from the seller.\u003cbr\u003e\nPrinted versions of the tray are available, contact us for more details.\u003c\/p\u003e\n\n\u003cp\u003eOrganize your Milwaukee Packout organizer with ease using this customized STL file. Upgrade your storage solution today!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700073709804,"sku":"TEK-005-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.6723862090_pe5r.jpg?v=1780504348"}],"url":"https:\/\/mountaineermaker.com\/collections\/3-8-drive.oembed","provider":"Mountaineer Maker","version":"1.0","type":"link"}