{"title":"By Your Storage — Harbor Freight Bauer","description":"\u003cp\u003eTrays sized for the Harbor Freight Bauer modular drawer (71125), plus the full universal-system range that fits with the Bauer adaptor. Printed, inspected, and test-fit in West Virginia.\u003c\/p\u003e","products":[{"product_id":"milwaukee-packout-socket-organizer-3d-printed-1-2-shockwave-metric-shallow-impact-socket-tray-29-sockets-8mm-to-36mm-gift-for-him","title":"Milwaukee Packout Socket Organizer, 3D Printed, 1\/2 Shockwave Metric Shallow Impact Socket Tray 29 Sockets 8mm to 36mm, Gift for Him","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nWe finally have it! The std depth 1\/2\" Milwaukee Shockwave impact socket tray covering the entire range of sockets from 8mm to 36mm. This is the partner to our popular deep socket version. Due to the length of the larger sizes in this set, this tray won't fit the compact Packout organizers. In order to use the tray in the deep organizers and keep the sockets in place, an optional spacer tray is available and will allow the Packout lid to keep the sockets in place.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-fit tray for every available Milwaukee SHOCKWAVE 1\/2\" standard depth metric impact socket — all 29 sizes from 8mm through 36mm, no sizes skipped. The standard depth companion to our 49-66-7015 deep metric tray.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eFITS DEEP PACKOUT ORGANIZERS ONLY — SPECIAL SPACER TRAY REQUIRED\u003cbr\u003e\nStandard depth sockets are shorter than deep sockets. This tray requires a custom spacer tray to fit correctly in the deep Packout organizer — the spacer fills the height gap so the lid closes properly and sockets stay put.\u003c\/p\u003e\n\n\u003cp\u003e✔ 48-22-8430 (Organizer) — with special spacer tray (select \"Tray + Special Spacer\" above)\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — with special spacer tray (select \"Tray + Special Spacer\" above)\u003cbr\u003e\n✘ 48-22-8431 (Low-Profile Organizer) — DOES NOT FIT\u003cbr\u003e\n✘ 48-22-8436 (Compact Low-Profile Organizer) — DOES NOT FIT\u003c\/p\u003e\n\n\u003cp\u003eThis custom spacer is designed specifically for this tray — it is not the same as the universal storage base spacer available elsewhere in my shop.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 29 Milwaukee SHOCKWAVE 1\/2\" standard depth metric impact sockets (8mm–36mm, every size)\u003cbr\u003e\n- Size labels embossed on the tray surface next to every pocket — readable at a glance\u003cbr\u003e\n- Optional: add the custom special spacer tray by selecting \"Tray + Storage Spacer\" from the options\u003c\/p\u003e\n\n\u003cp\u003eALL 29 SOCKET PART NUMBERS\u003cbr\u003e\n  8mm (49-66-6240) — individual purchase\u003cbr\u003e\n  9mm (49-66-6241) — individual purchase\u003cbr\u003e\n  10mm (49-66-6242) — from 49-66-6804 set\u003cbr\u003e\n  11mm (49-66-6243) — from 49-66-6804 set\u003cbr\u003e\n  12mm (49-66-6244) — from 49-66-6804 set\u003cbr\u003e\n  13mm (49-66-6245) — from 49-66-6804 set\u003cbr\u003e\n  14mm (49-66-6246) — from 49-66-6804 set\u003cbr\u003e\n  15mm (49-66-6247) — from 49-66-6804 set\u003cbr\u003e\n  16mm (49-66-6248) — from 49-66-6804 set\u003cbr\u003e\n  17mm (49-66-6249) — from 49-66-6804 set\u003cbr\u003e\n  18mm (49-66-6250) — from 49-66-6804 set\u003cbr\u003e\n  19mm (49-66-6251) — from 49-66-6804 set\u003cbr\u003e\n  20mm (49-66-6252) — from 49-66-6804 set\u003cbr\u003e\n  21mm (49-66-6253) — from 49-66-6804 set\u003cbr\u003e\n  22mm (49-66-6254) — from 49-66-6804 set\u003cbr\u003e\n  23mm (49-66-6255) — individual purchase\u003cbr\u003e\n  24mm (49-66-6256) — from 49-66-6804 set\u003cbr\u003e\n  25mm (49-66-6257) — individual purchase\u003cbr\u003e\n  26mm (49-66-6258) — individual purchase\u003cbr\u003e\n  27mm (49-66-6259) — individual purchase\u003cbr\u003e\n  28mm (49-66-6260) — individual purchase\u003cbr\u003e\n  29mm (49-66-6261) — individual purchase\u003cbr\u003e\n  30mm (49-66-6262) — individual purchase\u003cbr\u003e\n  31mm (49-66-6263) — individual purchase\u003cbr\u003e\n  32mm (49-66-6264) — individual purchase\u003cbr\u003e\n  33mm (49-66-6265) — individual purchase\u003cbr\u003e\n  34mm (49-66-6266) — individual purchase\u003cbr\u003e\n  35mm (49-66-6267) — individual purchase\u003cbr\u003e\n  36mm (49-66-6268) — individual purchase\u003c\/p\u003e\n\n\u003cp\u003eHOW TO SOURCE ALL 29 SOCKETS\u003cbr\u003e\nMilwaukee does not bundle all 29 standard depth 1\/2\" metric sizes in a single set. Most efficient path:\u003c\/p\u003e\n\n\u003cp\u003eSTEP 1 — Buy the 49-66-6804 set: covers 14 of the 29 metric sizes (10–22mm + 24mm, plus 13 SAE sockets).\u003c\/p\u003e\n\n\u003cp\u003eSTEP 2 — Buy these 15 sizes individually:\u003cbr\u003e\n8mm (49-66-6240) · 9mm (49-66-6241) · 23mm (49-66-6255)\u003cbr\u003e\n25mm (49-66-6257) · 26mm (49-66-6258) · 27mm (49-66-6259) · 28mm (49-66-6260)\u003cbr\u003e\n29mm (49-66-6261) · 30mm (49-66-6262) · 31mm (49-66-6263) · 32mm (49-66-6264)\u003cbr\u003e\n33mm (49-66-6265) · 34mm (49-66-6266) · 35mm (49-66-6267) · 36mm (49-66-6268)\u003c\/p\u003e\n\n\u003cp\u003eAll individual sockets available at Milwaukee, Home Depot, Acme Tools, and other Milwaukee retailers. Message me if you have sourcing questions before ordering.\u003c\/p\u003e\n\n\u003cp\u003eSTANDARD DEPTH vs. DEEP — WHAT'S THE DIFFERENCE?\u003cbr\u003e\nStandard depth sockets have a shallower internal hex engagement cavity than deep sockets of the same size. For the smaller sizes (8–16mm), the overall socket length is noticeably shorter. For the larger sizes (17–36mm), the overall socket length happens to be the same as the deep version, but the hex cavity is shallower. If you need to reach a recessed fastener, you want the deep socket. For most surface-level work and tight spaces, standard depth is ideal.\u003c\/p\u003e\n\n\u003cp\u003eNeed the deep metric companion tray instead?\u003cbr\u003e\nhttps:\/\/www.etsy.com\/listing\/4486550713\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping.\u003cbr\u003e\nTray colors: Black or Red · Label colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Every available size — all 29 Milwaukee SHOCKWAVE 1\/2\" standard depth metric sockets from 8mm through 36mm\u003cbr\u003e\n✔ Standard depth companion — pairs with the deep metric tray for complete depth coverage\u003cbr\u003e\n✔ Custom spacer available — purpose-built to raise this tray to the correct height in the deep Packout\u003cbr\u003e\n✔ Surface labels — size markings embossed on the tray surface next to every pocket\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require an opening through the tray floor — intentional precision engineering, not a defect. The socket is retained securely from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions? Message me before ordering. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Black Tray \/ White Letter","offer_id":47742171218156,"sku":"MIL-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray \/ Red Letter","offer_id":47742171250924,"sku":"MIL-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray \/ White Letter","offer_id":47742171283692,"sku":"MIL-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray \/ Black Letter","offer_id":47742171316460,"sku":"MIL-001-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.8079857456_5quk.jpg?v=1780504301"},{"product_id":"milwaukee-impact-socket-organizer-for-packout-low-profile-3-8-drive-no-skip","title":"Milwaukee Impact Socket Organizer for Packout Low Profile, 3\/8\" Drive No-Skip","description":"\u003cp\u003eMilwaukee Packout Socket Organizer – 3\/8\" Impact Sockets (SAE \u0026amp; Metric, PETG — heat-resistant material)\u003c\/p\u003e\n\n\u003cp\u003e3D-printed, single-piece PETG (tough, heat-resistant material) organizer trays designed specifically for Milwaukee 3\/8\" drive impact sockets, precision-fit for the Milwaukee Packout Low-Profile Organizers (48-22-8431 or 48-22-8436).\u003c\/p\u003e\n\n\u003cp\u003eEvery socket has a dedicated, clearly labeled location — no filler slots, no wasted space, and no rattling during transport.\u003c\/p\u003e\n\n\u003cp\u003eOrganizer trays only. Tools and Packout case not included.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS FITS\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee Packout\u003cbr\u003e\n• 48-22-8431\u003cbr\u003e\n• 48-22-8436\u003cbr\u003e\n(Low-Profile Organizers)\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee 3\/8\" Drive Impact Sockets\u003cbr\u003e\n• SAE: 1\/4\" – 1\" (deep and shallow)\u003cbr\u003e\n• Metric: 6mm – 24mm (deep and shallow)\u003c\/p\u003e\n\n\u003cp\u003eDesigned so every socket size has a specific, labeled location — no skipped sizes and no unused pockets.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ Not universal. These trays are dimensioned specifically for Milwaukee 3\/8\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCAPACITY\u003c\/p\u003e\n\n\u003cp\u003eComplete Set Capacity (SAE + Metric)\u003cbr\u003e\n• 68 total sockets\u003cbr\u003e\n– 30 SAE (15 sizes, deep and shallow)\u003cbr\u003e\n– 38 Metric (19 sizes, deep and shallow)\u003c\/p\u003e\n\n\u003cp\u003e• Additional storage for common accessories such as:\u003cbr\u003e\n– 3\/8\" impact adaptor\u003cbr\u003e\n– Extensions\u003cbr\u003e\n– Universal \/ swivel\u003c\/p\u003e\n\n\u003cp\u003eInterchangeable Single Compartment\u003cbr\u003e\n• SAE or Metric\u003cbr\u003e\n• Fits left or right side of the organizer\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCONFIGURATION OPTIONS\u003c\/p\u003e\n\n\u003cp\u003eComplete Set – $80\u003cbr\u003e\n• Includes one SAE tray and one Metric tray\u003cbr\u003e\n• Fills both compartments of one Low-Profile Organizer\u003c\/p\u003e\n\n\u003cp\u003eSingle Compartment – $45\u003cbr\u003e\n• Includes one tray only\u003cbr\u003e\n• Choose SAE or Metric\u003cbr\u003e\n• Compatible with either side of the organizer\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eDESIGN \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\n\u003cp\u003e• Single-piece, full-size print\u003cbr\u003e\n• No glued sections or bonded parts\u003c\/p\u003e\n\n\u003cp\u003e• Printed in PETG — a tough, heat-resistant material:\u003cbr\u003e\n– More impact-resistant than PLA\u003cbr\u003e\n– Better heat tolerance for vehicle storage\u003cbr\u003e\n– Oil and grease resistant\u003cbr\u003e\n– Will not soften or warp in hot vehicles like PLA\u003c\/p\u003e\n\n\u003cp\u003e• Socket pockets are designed to retain sockets during transport, including:\u003cbr\u003e\n– Vertical carry\u003cbr\u003e\n– Vehicle movement\u003cbr\u003e\n– Accidental drops\u003c\/p\u003e\n\n\u003cp\u003e• Clear, printed size labels\u003cbr\u003e\n• Rigid structure — does not compress or tear like foam\u003cbr\u003e\n• Designed to fully close the Packout lid without interference\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed, inspected, and test-fit using real Milwaukee impact sockets before shipping.\u003c\/p\u003e\n\n\u003cp\u003eMade in West Virginia, USA.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eABOUT 3D PRINTING SURFACE FINISH\u003c\/p\u003e\n\n\u003cp\u003eThese organizers are produced using professional-grade 3D printing. Unlike injection-molded plastic, 3D-printed parts may show minor surface characteristics that are normal for the process.\u003c\/p\u003e\n\n\u003cp\u003e• Visible layer lines and slight texture variations are normal\u003cbr\u003e\n• Small cosmetic marks or surface inconsistencies may be present\u003cbr\u003e\n• These do not affect strength, fit, or function\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed for durability and real-world jobsite use — appearance may vary slightly from tray to tray, but performance remains consistent.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSTL FILES ALSO AVAILABLE\u003c\/p\u003e\n\n\u003cp\u003eIf you prefer to print your own trays, digital STL files are sold separately in our shop.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for fully printed, ready-to-use organizers — no printing, tuning, or test-fitting required.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eOTHER BRANDS OR CUSTOM REQUESTS\u003c\/p\u003e\n\n\u003cp\u003eThese trays are designed for Milwaukee 3\/8\" impact sockets only.\u003c\/p\u003e\n\n\u003cp\u003eIf you use a different socket brand or want a tray for another Packout model, feel free to message us. We're open to:\u003cbr\u003e\n• Custom designs\u003cbr\u003e\n• Other socket brands\u003cbr\u003e\n• Suggestions for future organizers\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSHIPPING\u003c\/p\u003e\n\n\u003cp\u003e• Made to order\u003cbr\u003e\n• Ships in 3–5 business days\u003cbr\u003e\n• Carefully packaged to prevent damage during transit\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSUMMARY (QUICK SCAN)\u003c\/p\u003e\n\n\u003cp\u003e✓ Fits Milwaukee Packout Low-Profile Organizers (48-22-8431 \/ 48-22-8436)\u003cbr\u003e\n✓ Designed for Milwaukee 3\/8\" drive impact sockets\u003cbr\u003e\n✓ Holds complete SAE and\/or Metric sets (68 sockets total)\u003cbr\u003e\n✓ Retains sockets during vertical transport and jobsite handling\u003cbr\u003e\n✓ Single-piece PETG construction\u003cbr\u003e\n✓ Printed trays or DIY STL files available\u003cbr\u003e\n✓ Not universal — Milwaukee-specific by design\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"SAE Tray Only \/ Black Top\/Red Letter","offer_id":47700070138092,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"SAE Tray Only \/ Red Top\/Black Letter","offer_id":47700070170860,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Metric Tray Only \/ Black Top\/Red Letter","offer_id":47700070203628,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Metric Tray Only \/ Red Top\/Black Letter","offer_id":47700070236396,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Set  - Metric \u0026 SAE \/ Black Top\/Red Letter","offer_id":47700070269164,"sku":"MIL-002-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Set  - Metric \u0026 SAE \/ Red Top\/Black Letter","offer_id":47700070301932,"sku":"MIL-002-PHY","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7841294862_j4m3.jpg?v=1780504303"},{"product_id":"milwaukee-packout-socket-organizer-3d-printed-1-2-shockwave-sae-deep-impact-socket-tray-49-66-7012-gift-for-him","title":"Milwaukee Packout Socket Organizer 3D Printed 1\/2 Shockwave SAE Deep Impact Socket Tray 49-66-7012  Gift for Him","description":"\u003cp\u003ePrecision-fit tray for the complete Milwaukee SHOCKWAVE 1\/2\" SAE deep impact socket lineup — 3\/8\" through 1-9\/16\", all 20 sockets — drops straight into your Milwaukee Packout deep organizer.\u003c\/p\u003e\n\n\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nI wanted to offer a storage solution for the entire available range of the Milwaukee Shockwave 1\/2\" impact sockets. It will only fit in the deep Packout organizers. All of the sockets in the 49-66-7012 set fit in the tray with an additional space for the 1-9\/16\" socket only available from Milwaukee individually.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-fit tray for the complete Milwaukee SHOCKWAVE 1\/2\" SAE deep impact socket lineup — 3\/8\" through 1-9\/16\", all 20 sockets — drops straight into your Milwaukee Packout deep organizer.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 20 Milwaukee SHOCKWAVE 1\/2\" SAE deep impact sockets — 3\/8\" through 1-9\/16\", no sizes skipped\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — DEEP ORGANIZERS ONLY\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit 48-22-8431 (Low-Profile Organizer) or 48-22-8436 (Compact Low-Profile Organizer) — this tray is designed for the deeper cavity of the 48-22-8430 and 48-22-8435 only.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed for the complete Milwaukee SHOCKWAVE 1\/2\" Drive SAE deep impact socket lineup — 20 sockets, 3\/8\" through 1-9\/16\".\u003c\/p\u003e\n\n\u003cp\u003eThe Milwaukee 49-66-7012 (19pc set, 3\/8\"–1-1\/2\") fills 19 of the 20 pockets. The final size — 1-9\/16\" (49-66-6239) — is purchased individually from Milwaukee and is not available in any set.\u003c\/p\u003e \n\n\u003cp\u003eIndividual socket part numbers:\u003cbr\u003e\n3\/8\" (49-66-6220) · 7\/16\" (49-66-6221) · 1\/2\" (49-66-6222) · 9\/16\" (49-66-6223) · 5\/8\" (49-66-6224) · 11\/16\" (49-66-6225) · 3\/4\" (49-66-6226) · 13\/16\" (49-66-6227) · 7\/8\" (49-66-6228) · 15\/16\" (49-66-6229) · 1\" (49-66-6230) · 1-1\/16\" (49-66-6231) · 1-1\/8\" (49-66-6232) · 1-3\/16\" (49-66-6233) · 1-1\/4\" (49-66-6234) · 1-5\/16\" (49-66-6235) · 1-3\/8\" (49-66-6236) · 1-7\/16\" (49-66-6237) · 1-1\/2\" (49-66-6238) · 1-9\/16\" (49-66-6239 — individual)\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for the matching Milwaukee SHOCKWAVE 1\/2\" metric deep companion tray:\u003cbr\u003e\nhttps:\/\/mountaineermaker.etsy.com\/listing\/4486550713\u003c\/p\u003e\n\n\u003cp\u003eDon't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Complete no-skip SAE lineup — every Milwaukee 1\/2\" SAE deep impact socket size from 3\/8\" through 1-9\/16\", including the 1-9\/16\" that no set covers\u003cbr\u003e\n✔ Built for the deep Packout organizers — designed specifically for the 48-22-8430 and 48-22-8435\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: The largest sockets require an opening that goes all the way through the tray floor. This is intentional — the socket diameter exactly matches the pocket width, so it seats fully and is retained securely.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they work across Milwaukee Packout deep organizers (48-22-8430 and 48-22-8435) and drawer units with the right adapter. Check my shop for the matching 1\/2\" metric deep companion tray and other socket tray combinations.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run 1\/2\" drive impact tools and need every SAE socket organized and at hand. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a serious upgrade.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Black Top\/White Letter","offer_id":47700070334700,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700070367468,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/Black Letter","offer_id":47700070400236,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700070433004,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7899376368_rcm8.jpg?v=1780504304"},{"product_id":"milwaukee-packout-shockwave-impact-socket-organizer-3d-printed-3-8-metric-complete-no-skip-standard-deep-socket-tray-gift-for-him","title":"Milwaukee Packout Shockwave Impact Socket Organizer 3D Printed 3\/8 Metric Complete No-Skip Standard Deep Socket Tray Gift for Him","description":"\u003cp\u003ePrecision-fit tray for the complete Milwaukee SHOCKWAVE 3\/8\" metric impact socket lineup — 6mm through 24mm, standard and deep, all 38 sockets — drops straight into your Milwaukee Packout.\u003c\/p\u003e\n\n\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nThis is an organizer requested by a customer to contain all of the available 3\/8\" drive Milwaukee Impact metric sockets available in both deep and shallow. It takes several different sets or individual socket purchases to build this full set.\u003c\/p\u003e \n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 38 Milwaukee SHOCKWAVE 3\/8\" metric impact sockets — 19 standard and 19 deep, 6mm through 24mm, no sizes skipped\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed for the complete Milwaukee SHOCKWAVE 3\/8\" Drive metric impact socket lineup — every available size from 6mm through 24mm in both standard and deep, no sizes skipped.\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (19 sockets, 6mm–24mm):\u003cbr\u003e\n6mm (49-66-6130) · 7mm (49-66-6131) · 8mm (49-66-6132) · 9mm (49-66-6133) · 10mm (49-66-6134) · 11mm (49-66-6135) · 12mm (49-66-6136) · 13mm (49-66-6137) · 14mm (49-66-6138) · 15mm (49-66-6139) · 16mm (49-66-6140) · 17mm (49-66-6141) · 18mm (49-66-6142) · 19mm (49-66-6143) · 20mm (49-66-6737) · 21mm (49-66-6144) · 22mm (49-66-6145) · 23mm (49-66-6146) · 24mm (49-66-6147)\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (19 sockets, 6mm–24mm):\u003cbr\u003e\n6mm (49-66-6148) · 7mm (49-66-6149) · 8mm (49-66-6150) · 9mm (49-66-6151) · 10mm (49-66-6152) · 11mm (49-66-6153) · 12mm (49-66-6154) · 13mm (49-66-6155) · 14mm (49-66-6156) · 15mm (49-66-6157) · 16mm (49-66-6158) · 17mm (49-66-6159) · 18mm (49-66-6160) · 19mm (49-66-6161) · 20mm (49-66-6738) · 21mm (49-66-6162) · 22mm (49-66-6163) · 23mm (49-66-6164) · 24mm (49-66-6165)\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 3\/8\" impact sockets. Other brands may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for the matching Milwaukee SHOCKWAVE 3\/8\" SAE companion tray and the full SAE + Metric bundle.\u003cbr\u003e\n[PLACEHOLDER — SAE tray URL]\u003c\/p\u003e\n\n\u003cp\u003eDon't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Complete no-skip metric lineup — every size Milwaukee makes in 3\/8\" metric impact, standard and deep, in one tray\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: The largest sockets require an opening that goes all the way through the tray floor. This is intentional — the socket diameter exactly matches the pocket width, so it seats fully and is retained securely.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Low-Profile Organizer (48-22-8431), Compact Low-Profile Organizer (48-22-8436), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for the matching SAE companion tray and the full SAE + Metric bundle.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who want every Milwaukee 3\/8\" metric impact socket organized and at hand. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700070629612,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700070662380,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700070695148,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700070727916,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7899835908_1772.jpg?v=1780504306"},{"product_id":"milwaukee-packout-socket-organizer-3d-printed-1-2-shockwave-metric-deep-impact-socket-tray-49-66-7015-29-sockets-8mm-to-36mm-gift-for-him","title":"Milwaukee Packout Socket Organizer, 3D Printed, 1\/2 Shockwave Metric Deep Impact Socket Tray 49-66-7015, 29 Sockets 8mm to 36mm,Gift for Him","description":"\u003cp\u003ePrecision-fit tray for the complete 49-66-7015 Milwaukee SHOCKWAVE 1\/2\" metric deep impact socket lineup — 8mm through 36mm, all 29 sockets — drops straight into your Milwaukee Packout deep organizer.\u003c\/p\u003e\n\n\u003cp\u003eFROM BOB (Head Maker):\u003cbr\u003e\nI had customers ask about Milwaukee 1\/2\" impact socket trays. When I take on a new tool series, I like to offer a solution for the full range of set options the vendor sells. In this case, I wanted a tray to cover every 1\/2\" drive Metric socket that Milwaukee makes. We are doing the same on the SAE side as well.\u003c\/p\u003e \n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 29 Milwaukee SHOCKWAVE 1\/2\" deep metric impact sockets — 8mm through 36mm, no sizes skipped\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — DEEP ORGANIZERS ONLY\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit the low-profile organizers (48-22-8431, 48-22-8436) — this tray is designed for the deeper cavity of the 48-22-8430 and 48-22-8435 only.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed for the complete Milwaukee SHOCKWAVE 1\/2\" Drive Metric Deep 6-Point impact socket lineup — all 29 sockets, 8mm through 36mm.\u003c\/p\u003e\n\n\u003cp\u003eNeed the shallow metric companion tray instead?\u003cbr\u003e\nhttps:\/\/mountaineermaker.etsy.com\/listing\/4513912557\u003c\/p\u003e\n\n\u003cp\u003eComplete set (fills all 29 pockets in one purchase):\u003cbr\u003e\n49-66-7015 — 29pc SHOCKWAVE 1\/2\" Drive Metric Deep 6-Point Socket Set (8mm–36mm)\u003c\/p\u003e\n\n\u003cp\u003eIndividual socket part numbers:\u003cbr\u003e\n8mm — 49-66-6269\u003cbr\u003e\n9mm — 49-66-6270\u003cbr\u003e\n10mm — 49-66-6271\u003cbr\u003e\n11mm — 49-66-6272\u003cbr\u003e\n12mm — 49-66-6273\u003cbr\u003e\n13mm — 49-66-6274\u003cbr\u003e\n14mm — 49-66-6275\u003cbr\u003e\n15mm — 49-66-6276\u003cbr\u003e\n16mm — 49-66-6277\u003cbr\u003e\n17mm — 49-66-6278\u003cbr\u003e\n18mm — 49-66-6279\u003cbr\u003e\n19mm — 49-66-6280\u003cbr\u003e\n20mm — 49-66-6281\u003cbr\u003e\n21mm — 49-66-6282\u003cbr\u003e\n22mm — 49-66-6283\u003cbr\u003e\n23mm — 49-66-6284\u003cbr\u003e\n24mm — 49-66-6285\u003cbr\u003e\n25mm — 49-66-6286\u003cbr\u003e\n26mm — 49-66-6287\u003cbr\u003e\n27mm — 49-66-6288\u003cbr\u003e\n28mm — 49-66-6289\u003cbr\u003e\n29mm — 49-66-6290\u003cbr\u003e\n30mm — 49-66-6291\u003cbr\u003e\n31mm — 49-66-6292\u003cbr\u003e\n32mm — 49-66-6293\u003cbr\u003e\n33mm — 49-66-6294\u003cbr\u003e\n34mm — 49-66-6295\u003cbr\u003e\n35mm — 49-66-6296\u003cbr\u003e\n36mm — 49-66-6297\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for the matching Milwaukee SHOCKWAVE 1\/2\" SAE deep companion tray.\u003cbr\u003e\nhttps:\/\/mountaineermaker.etsy.com\/listing\/4486597156\u003c\/p\u003e\n\n\u003cp\u003eDon't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading. Built for the shop, the truck, and the jobsite.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Complete no-skip metric lineup — every Milwaukee 1\/2\" deep metric impact socket size from 8mm through 36mm, 29 sockets, in one tray\u003cbr\u003e\n✔ Built for the deep Packout organizers — designed specifically for the 48-22-8430 and 48-22-8435, not the low-profile models\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they work across Milwaukee Packout organizers and drawer units with the right adapter. Check my shop for matching SAE companion trays, storage base spacer trays, and drawer adapter frames.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run 1\/2\" drive impact tools and need every metric socket organized and at hand. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a serious upgrade.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Black Top\/White Letter","offer_id":47700070760684,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700070793452,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/Black Letter","offer_id":47700070826220,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700070858988,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7898887544_m9ky.jpg?v=1780504308"},{"product_id":"milwaukee-packout-shockwave-49-66-7009-impact-socket-organizer-43-piece-3-8-packout-tray-sae-metric","title":"Milwaukee Packout Shockwave 49-66-7009 Impact Socket Organizer – 43-Piece 3\/8\" Packout Tray, SAE \u0026 Metric","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed socket tray organizes your complete Milwaukee SHOCKWAVE 49-66-7009 SAE and metric impact set — standard, deep, and accessories all in one place and drops straight into your Milwaukee Packout.\u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, storage tray, and Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 40 sockets from the Milwaukee SHOCKWAVE 49-66-7009 SAE and metric impact set — standard and deep\u003cbr\u003e\n- Dedicated pocket area for the included 3\" extension, universal joint, and 3\/8\" adapter\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8436 (Low-Profile Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use the tray standalone in any drawer, or add the optional dovetail-locking grid frame to lock multiple trays into a perfectly aligned system (see shop)\u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed specifically for the Milwaukee SHOCKWAVE Impact Duty 3\/8 in. Drive SAE \u0026amp; Metric Deep 6-Point Socket Set, 43-Piece (Item 49-66-7009).\u003cbr\u003e\n \u003cbr\u003e\n40 sockets — standard and deep in both SAE and metric:\u003cbr\u003e\nSAE standard: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nSAE deep: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nMetric standard: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nMetric deep: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nAccessories: 3\" extension, universal joint, 3\/8\" adapter\u003cbr\u003e\n \u003cbr\u003e\nIndividual SAE socket part numbers:\u003cbr\u003e\nStandard:\u003cbr\u003e\n- 5\/16\" — 49-66-6102\u003cbr\u003e\n- 3\/8\" — 49-66-6104\u003cbr\u003e\n- 7\/16\" — 49-66-6105\u003cbr\u003e\n- 1\/2\" — 49-66-6106\u003cbr\u003e\n- 9\/16\" — 49-66-6107\u003cbr\u003e\n- 5\/8\" — 49-66-6108\u003cbr\u003e\n- 11\/16\" — 49-66-6109\u003cbr\u003e\n- 3\/4\" — 49-66-6110\u003cbr\u003e\n \u003cbr\u003e\nDeep:\u003cbr\u003e\n- 5\/16\" — 49-66-6117\u003cbr\u003e\n- 3\/8\" — 49-66-6119\u003cbr\u003e\n- 7\/16\" — 49-66-6120\u003cbr\u003e\n- 1\/2\" — 49-66-6121\u003cbr\u003e\n- 9\/16\" — 49-66-6122\u003cbr\u003e\n- 5\/8\" — 49-66-6123\u003cbr\u003e\n- 11\/16\" — 49-66-6124\u003cbr\u003e\n- 3\/4\" — 49-66-6125\u003cbr\u003e\n \u003cbr\u003e\nIndividual metric socket part numbers:\u003cbr\u003e\nStandard:\u003cbr\u003e\n- 8mm — 49-66-6132\u003cbr\u003e\n- 9mm — 49-66-6133\u003cbr\u003e\n- 10mm — 49-66-6134\u003cbr\u003e\n- 11mm — 49-66-6135\u003cbr\u003e\n- 12mm — 49-66-6136\u003cbr\u003e\n- 13mm — 49-66-6137\u003cbr\u003e\n- 14mm — 49-66-6138\u003cbr\u003e\n- 15mm — 49-66-6139\u003cbr\u003e\n- 16mm — 49-66-6140\u003cbr\u003e\n- 17mm — 49-66-6141\u003cbr\u003e\n- 18mm — 49-66-6142\u003cbr\u003e\n- 19mm — 49-66-6143\u003cbr\u003e\n \u003cbr\u003e\nDeep:\u003cbr\u003e\n- 8mm — 49-66-6150\u003cbr\u003e\n- 9mm — 49-66-6151\u003cbr\u003e\n- 10mm — 49-66-6152\u003cbr\u003e\n- 11mm — 49-66-6153\u003cbr\u003e\n- 12mm — 49-66-6154\u003cbr\u003e\n- 13mm — 49-66-6155\u003cbr\u003e\n- 14mm — 49-66-6156\u003cbr\u003e\n- 15mm — 49-66-6157\u003cbr\u003e\n- 16mm — 49-66-6158\u003cbr\u003e\n- 17mm — 49-66-6159\u003cbr\u003e\n- 18mm — 49-66-6160\u003cbr\u003e\n- 19mm — 49-66-6161\u003cbr\u003e\n \u003cbr\u003e\n⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 49-66-7009 impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.\u003cbr\u003e\n \u003cbr\u003e\nCheck my shop for trays covering other combinations of Milwaukee SHOCKWAVE 3\/8\" and 1\/2\" drive impact sockets. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading. Built for the shop, the truck, and the jobsite.\u003cbr\u003e\n- Tray colors: Black or Red\u003cbr\u003e\n- Label colors: Red, Black, or White\u003cbr\u003e\n- Select your color combination from the purchase options.\u003cbr\u003e\n- Every tray is printed and test-fit before shipping.\u003cbr\u003e\n- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned in any standard drawer (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Dedicated accessory pockets — the extension, universal joint, and adapter have a home too\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n \u003cbr\u003e\nTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Compact Low-Profile (48-22-8436), Low-Profile (48-22-8431), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching SAE and metric companion trays that fit together into a complete organized system.\u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.\u003cbr\u003e\n \u003cbr\u003e\nPLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray","offer_id":47700070924524,"sku":"MIL-006-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray","offer_id":47700070957292,"sku":"MIL-006-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7930874035_epuh.jpg?v=1780504309"},{"product_id":"milwaukee-packout-sunex-1848-1-4-sae-metric-socket-organizer-modular-tray-system-48-piece-impact-mechanic-gift","title":"Milwaukee Packout Sunex 1848 1\/4\" SAE Metric Socket Organizer Modular Tray System 48-Piece Impact Mechanic Gift","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nAnother customer requested set. This set reused the Tekton 1\/4\" modular tray we developed. The idea is to allow removal of just the Metric or SAE tray's for use without needing to take the entire Packout. Since the socket trays do not consume the entire available tray space, I included a storage tray with a removable rack to handle any accessories you need to carry with the sockets, such as ratchets or extensions. Pay attention to the Taiwan vs Chinese versions of the Sunex sockets. The dimensions are different thus the trays are slightly different.\u003c\/p\u003e \n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ IMPORTANT — MANUFACTURING ORIGIN NOTE:\u003cbr\u003e\nSunex produces the 1848 set in both Taiwan and China. Socket dimensions differ between production versions. This tray was designed and sized specifically for the CHINA-manufactured Sunex 1848 set. If you own the older Taiwan-manufactured version, the sockets may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003eHow to identify your set: China-manufactured sockets do NOT carry a \"TAIWAN\" stamp on the socket body. If your sockets are stamped \"TAIWAN\", you have the Taiwan version — message me before ordering and I will help confirm fit.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-fit modular tray system for the complete Sunex 1848 1\/4\" drive SAE \u0026amp; metric master impact socket set — all 48 sockets plus ratchet and accessories, organized in individually removable sub-trays that nest into a single unit.\u003c\/p\u003e\n\n\u003cp\u003eTRAY SYSTEM ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray system only. Sockets, ratchet, accessories, and the Sunex blow-molded case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 4 individually removable PETG sub-trays (tough, heat-resistant material) — printed, inspected, and test-fit before shipping:\u003cbr\u003e\n  · Metric socket tray — 14 standard (4–15mm) + 14 deep (4–15mm) = 28 metric sockets\u003cbr\u003e\n  · SAE socket tray — 10 standard (3\/16\"–9\/16\") + 10 deep (3\/16\"–9\/16\") = 20 SAE sockets\u003cbr\u003e\n  · Small accessory tray — additional storage for loose accessories, includes a removable rack to hold  ratchets, extensions, universal joints, etc.\u003cbr\u003e\n- Size labels embossed on the tray surface next to every pocket — readable at a glance without looking down into the pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — system drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — system drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Milwaukee Packout Drawers — compatible with adapter frame (available in shop or by request)\u003cbr\u003e\n✔ Bauer Modular Drawers — compatible with adapter frame (available in shop or by request)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nDesigned specifically for the Sunex 1848 48-piece 1\/4\" Drive SAE \u0026amp; Metric Master Impact Socket Set — CHINA-manufactured version.\u003c\/p\u003e\n\n\u003cp\u003eSAE Standard (10 sockets, 3\/16\"–9\/16\"):\u003cbr\u003e\n3\/16 (806) · 7\/32 (807) · 1\/4 (808) · 9\/32 (809) · 5\/16 (810) · 11\/32 (811) · 3\/8 (812) · 7\/16 (814) · 1\/2 (816) · 9\/16 (818)\u003c\/p\u003e\n\n\u003cp\u003eSAE Deep (10 sockets, 3\/16\"–9\/16\"):\u003cbr\u003e\n3\/16 (806D) · 7\/32 (807D) · 1\/4 (808D) · 9\/32 (809D) · 5\/16 (810D) · 11\/32 (811D) · 3\/8 (812D) · 7\/16 (814D) · 1\/2 (816D) · 9\/16 (818D)\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (14 sockets, 4–15mm):\u003cbr\u003e\n4 (804M) · 4.5 (8045M) · 5 (805M) · 5.5 (8055M) · 6 (806M) · 7 (807M) · 8 (808M) · 9 (809M) · 10 (810M) · 11 (811M) · 12 (812M) · 13 (813M) · 14 (814M) · 15 (815M)\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (14 sockets, 4–15mm):\u003cbr\u003e\n4 (804MD) · 4.5 (8045MD) · 5 (805MD) · 5.5 (8055MD) · 6 (806MD) · 7 (807MD) · 8 (808MD) · 9 (809MD) · 10 (810MD) · 11 (811MD) · 12 (812MD) · 13 (813MD) · 14 (814MD) · 15 (815MD)\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray system is dimensioned specifically for CHINA-manufactured Sunex 1848 sockets. Other brands and other production versions may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eTHE MODULAR SYSTEM — HOW IT WORKS\u003cbr\u003e\nThe tray system consists of 4 individually removable sub-trays that nest into the outer frame:\u003cbr\u003e\n· Pull out just the metric tray for under-hood work — leave the SAE tray organized in your Packout\u003cbr\u003e\n· Pull out the accessory holder when you just need the ratchet setup\u003cbr\u003e\n· All sub-trays nest back together into a single organized unit that drops into any Packout\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Fully modular — 4 individually removable sub-trays, reconfigurable to how you work\u003cbr\u003e\n✔ Complete set coverage — all 48 sockets plus ratchet and accessories have dedicated labeled spots\u003cbr\u003e\n✔ Surface labels — size markings embossed on the tray surface next to every pocket, readable at a glance\u003cbr\u003e\n✔ Universal MountaineerMaker footprint — fits Packout organizers directly, and drawer units with adapter frames\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold sockets securely\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings on smallest and largest sockets are by design — not a defect\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. The standardized footprint works across Milwaukee Packout organizers, Packout drawer units, and Bauer Modular drawers with the right adapter. Klein ModBox support coming soon.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red \/ Red","offer_id":47700071252204,"sku":"SUN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Black","offer_id":47700071284972,"sku":"SUN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ White","offer_id":47700071317740,"sku":"SUN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Red","offer_id":47700071350508,"sku":"SUN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Black","offer_id":47700071383276,"sku":"SUN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ White","offer_id":47700071416044,"sku":"SUN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.8105379141_clw0.jpg?v=1780504312"},{"product_id":"milwaukee-packout-sunex-3342-3-8-sae-metric-socket-organizer-tray-42-piece-impact-mechanic-gift","title":"Milwaukee Packout Sunex 3342 3\/8\" SAE Metric Socket Organizer Tray 42-Piece Impact Mechanic Gift","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nBy customer request, this tray is custom-designed to accommodate the Sunex 3342 3\/8\" metric \u0026amp; SAE socket set, including the swivel and 3\" extension. As a reminder, each of our Mountaineer Maker system socket trays is universal in shape and design, which allows them to not only fit the Milwaukee Packout organizers but also the Packout drawers, Bauer drawers, and soon, the Klein ModBox storage boxes. Keep in mind that that these other storage units require custom adaptors which are available in our store or by request.\u003c\/p\u003e \n\n\u003cp\u003e⚠️ IMPORTANT — MANUFACTURING ORIGIN NOTE:\u003cbr\u003e\nSunex recently moved production of the 3342 set from Taiwan to China. Socket dimensions have changed as a result of this manufacturing shift. This tray was designed and sized specifically for the TAIWAN-manufactured Sunex 3342 set. If you own the newer CHINA-manufactured version, the socket dimensions may differ, and the sockets may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003eHow to identify your set: Check the individual socket markings — Taiwan-manufactured sockets are stamped \"TAIWAN\" on the socket body. China-manufactured sockets will not carry this marking. If you are unsure which version you own, message me before ordering, and I will help you confirm fit.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by Mountaineer Maker.\u003c\/p\u003e\n\n\u003cp\u003eStop hunting through a pile of impact sockets or stacks of nondescript blow-molded cases. This 3D printed tray holds all 40 sockets from the Sunex 3342 3\/8\" master set — plus the included extension and universal joint — and drops straight into your Milwaukee Packout with no setup required.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and the Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\nPockets for all 40 sockets: 12 standard metric (8mm–19mm), 12 deep metric (8mm–19mm), 8 standard SAE (5\/16\"–3\/4\"), 8 deep SAE (5\/16\"–3\/4\")\u003cbr\u003e\nDedicated pockets for the included 3\" extension and universal joint\u003cbr\u003e\nSize labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nSunex 3342 — 3\/8\" Drive SAE \u0026amp; Metric 6 Point Standard \u0026amp; Deep 42-Piece Master Impact Socket Set\u003cbr\u003e\nMetric Standard: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nMetric Deep: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nSAE Standard: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nSAE Deep: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nAccessories: 3\" Extension, Universal Joint\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Sunex 3342 impact sockets. Other brands' sockets use different wall thicknesses and lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for trays covering other Sunex sets and drive sizes.\u003c\/p\u003e \n\n\u003cp\u003eDon't see what you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nEvery tray is printed and test-fit before shipping.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines. This is normal — no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Dedicated pockets for accessories — extension and universal joint have their own labeled spots, not just tossed in a corner\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Low-Profile Organizer (48-22-8431), Compact Low-Profile Organizer (48-22-8436), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for companion trays covering other Sunex and impact socket sets.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. The Sunex 3342 is a serious master set — it deserves a serious home. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every single day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained on the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red","offer_id":47700071547116,"sku":"SUN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":47700071579884,"sku":"SUN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.8054182040_5rrl.jpg?v=1780504315"},{"product_id":"milwaukee-packout-tekton-skt05303-socket-organizer-modular-3d-printed-1-4-sae-metric-tray-system","title":"Milwaukee Packout Tekton SKT05303 Socket Organizer Modular 3D Printed 1\/4 SAE Metric Tray System","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nContinuing to expand on my Tekton offerings. I wanted a way to bring my 1\/4\" Tekton sockets on my truck. I also wanted to bring along just what I need when working with limited space. That's what drove this modular design, allowing me to bring just the SAE or Metric sockets when necessary. I can also print this as a single solid tray if you prefer.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-fit modular tray system for the complete Tekton SKT05303 1\/4\" drive socket and ratchet set — all 50 sockets and all 6 accessories, organized in individually removable sub-trays that can be reconfigured, separated, or used standalone.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray system only. Sockets, ratchet, accessories, and the Tekton case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 4 individually removable PETG sub-trays (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 56 pieces from the Tekton SKT05303 set:\u003cbr\u003e\n  · 11 SAE standard sockets (5\/32\"–9\/16\")\u003cbr\u003e\n  · 11 SAE deep sockets (5\/32\"–9\/16\")\u003cbr\u003e\n  · 14 metric standard sockets (4–15mm)\u003cbr\u003e\n  · 14 metric deep sockets (4–15mm)\u003cbr\u003e\n  · 90-tooth ratchet, 3\" and 6\" extensions, universal joint, hex bit holder, spinner handle\u003cbr\u003e\n- Each sub-tray is fully removable and usable independently\u003cbr\u003e\n- Size labels embossed on the tray surface next to every pocket\u003cbr\u003e\n- Complete system fits Milwaukee Packout organizers and standard tool chest drawers\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — system drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — system drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — add storage base tray underneath, or nest with a second tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — add storage base tray underneath, or nest with a second tray\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nDesigned specifically for the Tekton SKT05303 56-Piece 1\/4\" Drive 6-Point Socket \u0026amp; Ratchet Set.\u003c\/p\u003e\n\n\u003cp\u003eSAE Standard (11 sockets, 5\/32\"–9\/16\"): 5\/32, 3\/16, 7\/32, 1\/4, 9\/32, 5\/16, 11\/32, 3\/8, 7\/16, 1\/2, 9\/16\"\u003cbr\u003e\nSAE Deep (11 sockets, 5\/32\"–9\/16\"): 5\/32, 3\/16, 7\/32, 1\/4, 9\/32, 5\/16, 11\/32, 3\/8, 7\/16, 1\/2, 9\/16\"\u003cbr\u003e\nMetric Standard (14 sockets, 4–15mm): 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm\u003cbr\u003e\nMetric Deep (14 sockets, 4–15mm): 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm\u003cbr\u003e\nAccessories: 90-tooth ratchet · 3\" extension · 6\" extension · universal joint · hex bit holder · spinner handle\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray system is dimensioned specifically for Tekton SKT05303 sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eDon't see the set you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eTHE MODULAR SYSTEM — HOW IT WORKS\u003cbr\u003e\nThe tray system is made up of 4 individually removable sub-trays that nest together into a single organized unit:\u003c\/p\u003e\n\n\u003cp\u003e· Metric deep sub-tray — all 14 metric deep sockets (4–15mm)\u003cbr\u003e\n· SAE standard + deep sub-tray — all 22 SAE sockets (5\/32\"–9\/16\", standard and deep)\u003cbr\u003e\n· Accessories sub-tray — ratchet, extensions, universal joint, hex bit holder\u003cbr\u003e\n· Spinner handle sub-tray — dedicated pocket for the spinner handle\u003c\/p\u003e\n\n\u003cp\u003eEach sub-tray can be pulled out and used at the bench independently, then snapped back into the system. Take just the metric tray to the car, leave the rest organized in your Packout. Use the accessories tray alone when you need the ratchet setup without the sockets. The system adapts to how you actually work.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight surface texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Fully modular — 4 individually removable sub-trays let you grab just what you need and leave the rest organized\u003cbr\u003e\n✔ Complete set coverage — all 50 sockets and all 6 accessories from the SKT05303 have a dedicated labeled spot\u003cbr\u003e\n✔ Fits all 4 Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Size labels embossed on the tray surface next to every pocket — read sizes at a glance without looking down into the pocket\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack with other trays or add a storage base underneath\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — system drops straight in\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: the largest sockets require an opening that goes through the tray floor. The socket is retained securely from the sides.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint — drop it into any Milwaukee Packout Low-Profile Organizer (48-22-8431), Compact Low-Profile Organizer (48-22-8436), Organizer (48-22-8430), or Compact Organizer (48-22-8435). Check my shop for matching trays for other socket sets and brands.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who want every Tekton 1\/4\" socket organized, labeled, and accessible. The modular design is especially useful for technicians who need to bring a subset of tools to a job without dragging the whole kit. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some smaller sockets require an opening that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or tool setup. If this tray system earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700071612652,"sku":"TEK-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700071645420,"sku":"TEK-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700071678188,"sku":"TEK-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700071710956,"sku":"TEK-002-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.8012353766_7u52.jpg?v=1780504317"},{"product_id":"milwaukee-packout-flexrail-universal-socket-organizer-starter-kit-rotating-rail-system-compatible-tool-organizer-fathers-day-gift","title":"Milwaukee Packout FlexRail Universal Socket Organizer Starter Kit — Rotating Rail System, Compatible Tool Organizer Fathers Day Gift","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nI received a lot of requests for tool trays for the storage platforms, like the Packout, to organize smaller sets like torx and allen sockets, or individual tools like sockets, extensions, etc. These sets typically don't justify an entire dedicated tray. As a result, I created this universal tray that is infinitely flexible to hold most any kind of tool that can be attached to a rail. I patterned the rails to fit the rail accessories from Tekton and Ernst Mfg. I am also expanding my own developed retainers for the rails for things like screwdrivers, 1\/4\" bits, etc. The sky is the limit. If you don't see what you're looking for, just ask.\u003c\/p\u003e \n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eStop cramming your Torx sets, hex sockets, ratchets, and extensions into a corner of the toolbox. The MountaineerMaker FlexRail Starter Kit turns your storage platform into a fully configurable tool platform — designed, printed, and assembled in West Virginia, USA.\u003c\/p\u003e\n\n\u003cp\u003eTRAY AND RAILS ONLY — Milwaukee Packout case, sockets, and tools are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG (tough, heat-resistant material) FlexRail tray (standardized MountaineerMaker footprint, 21-groove continuous wall system)\u003cbr\u003e\n- 4 custom double-sided rotating rails (183mm) — black PETG (tough, heat-resistant)\u003cbr\u003e\n- 10 Ernst 1\/4\" drive twist-lock socket clips\u003cbr\u003e\n- 10 Ernst 3\/8\" drive twist-lock socket clips\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — rails rotate flat, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — rails rotate flat, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — stack with any MountaineerMaker socket tray to fill depth\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — stack with any MountaineerMaker socket tray to fill depth\u003cbr\u003e\n✔ Packout Drawers — use one of our drawer adaptors (sold separately) to fit any of the Packout drawer modes. \u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer\u003c\/p\u003e\n\n\u003cp\u003eHOW THE FLEXRAIL SYSTEM WORKS\u003cbr\u003e\nEach custom rail has a circular boss on both ends that seats into the continuous groove channels running the full length of the tray's interior walls. That circular boss is what makes the rail rotate. The boss and rail shape also ensure the rail remains in place when the lid is closed.\u003c\/p\u003e\n\n\u003cp\u003eWorking position: rails stand upright. Load your sockets, bits, or tools using the included Ernst twist-lock clips. Access any tool instantly.\u003c\/p\u003e\n\n\u003cp\u003eTransport position: rotate rails flat. The lid closes fully on both Low-Profile Packout models. When the lid is closed, the tray geometry locks the rails in the grooves — nothing moves or rattles during transport.\u003c\/p\u003e\n\n\u003cp\u003eRail removal: lift any rail straight out and take it to the job. Leave the rest behind.\u003c\/p\u003e\n\n\u003cp\u003eCOMPATIBLE WITH STANDARD ERNST AND TEKTON CLIPS\u003cbr\u003e\nYour included Ernst clips fit directly onto the FlexRail rails. The rails accept all standard Ernst and Tekton twist-lock socket clips — buy additional clips in any drive size from Ernst (ernstmfg.com), Tekton, Amazon, or Summit Racing, etc.\u003c\/p\u003e\n\n\u003cp\u003eClip capacity per rail per side (approximate):\u003cbr\u003e\n- 3\/8\" drive sockets: ~10 per side\u003cbr\u003e\n- 1\/4\" drive sockets: ~12 per side\u003cbr\u003e\n- Double-sided loading doubles capacity\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS SYSTEM IS DESIGNED FOR\u003cbr\u003e\n✔ Torx socket sets — finally a home for the ones too small to justify their own tray\u003cbr\u003e\n✔ Hex \/ Allen socket sets\u003cbr\u003e\n✔ Bit socket sets\u003cbr\u003e\n✔ Ratchets and flex-head ratchets\u003cbr\u003e\n✔ Extensions and adapters\u003cbr\u003e\n✔ Mixed specialty sets you want in one place\u003c\/p\u003e\n\n\u003cp\u003ePAIRS WITH YOUR EXISTING SOCKET TRAYS\u003cbr\u003e\nThe FlexRail tray uses the same standardized MountaineerMaker footprint as every socket tray in the system. Drop a precision-fit socket tray on the bottom of a deep Packout Organizer (48-22-8430 or 48-22-8435) and stack the FlexRail on top — every drive size, every tool type, one Packout.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for precision-fit trays for Milwaukee SHOCKWAVE, Tekton, Bauer, and ICON socket sets.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic; impact-resistant, oil and chemical resistant, handles garage heat\u003cbr\u003e\nTray colors: Black or Red (select from purchase options)\u003cbr\u003e\nRails: Black PETG (tough, heat-resistant material)\u003cbr\u003e\nIncluded Ernst clips: (black = 3\/8\", black = 1\/4\")\u003cbr\u003e\nEvery tray and rail set is printed and test-fit before shipping.\u003cbr\u003e\nNote: 3D-printed parts show minor layer lines — normal, no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Rotating rails — upright for access, flat for transport, lid closes every time\u003cbr\u003e\n✔ Infinite positioning — 21 grooves per side, place rails exactly where your tools need them\u003cbr\u003e\n✔ Double-sided loading — clips on both faces of each rail\u003cbr\u003e\n✔ Rails are removable — lift out and take exactly the tools you need to the job\u003cbr\u003e\n✔ System is expandable — add Ernst\/Tekton clips in any drive or tool size, any quantity\u003cbr\u003e\n✔ Coming soon: shaft holders for screwdrivers, ratchets, and extensions\u003cbr\u003e\n✔ Stackable — pairs with any MountaineerMaker socket tray in deep Packout organizers\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eFREQUENTLY ASKED QUESTIONS\u003c\/p\u003e\n\n\u003cp\u003eDo I need to buy anything else?\u003cbr\u003e\nNo. The starter kit includes the tray, 4 rails, and 20 Ernst clips (10x 1\/4\" and 10x 3\/8\"). Load your tools and drop it in your Packout.\u003c\/p\u003e\n\n\u003cp\u003eCan I add more clips?\u003cbr\u003e\nYes. The rails accept all standard Ernst and Tekton twist-lock clips. Buy additional clips in any drive size from Ernst, Tekton, Amazon, or Summit Racing.\u003c\/p\u003e\n\n\u003cp\u003eWill the lid close with tools loaded?\u003cbr\u003e\nYes — when rails are rotated flat, the lid closes fully on both Low-Profile Packout models (48-22-8431 and 48-22-8436). Standard sockets and bit sockets will close without issue. Very tall tools may limit lid closure — measure if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCan I use 1\/2\" drive clips?\u003cbr\u003e\nYes. The rails accept Ernst\/Tekton 1\/2\" clips. Source them separately — the starter kit includes 1\/4\" and 3\/8\".\u003c\/p\u003e \n\n\u003cp\u003eWill it work for my Torx \/ hex set?\u003cbr\u003e\nYes — this is exactly what it was designed for. The FlexRail handles specialty sets that don't justify a dedicated precision-fit tray.\u003c\/p\u003e\n\n\u003cp\u003eCan I use this in a tool chest drawer?\u003cbr\u003e\nYes — the tray works standalone in any standard drawer. Rails function identically outside a Packout.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue, message me first — I'll make it right.\u003cbr\u003e\nThe FlexRail system is designed for the Ernst\/Tekton twist-lock clip standard. Other clip brands may not be compatible.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a specific configuration or accessory? Message me — happy to help you design your ideal setup.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me. If the FlexRail earns a permanent spot in your Packout, a quick review makes a real difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray","offer_id":47700071776492,"sku":"UNI-001-PHY","price":49.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray","offer_id":47700071809260,"sku":"UNI-001-PHY","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.8029207878_iudh.jpg?v=1780504320"},{"product_id":"milwaukee-packout-swivel-socket-organizer-3d-printed-icon-59745-59747-3-8-sae-metric-impact-socket-tray-mechanic-gift","title":"Milwaukee Packout Swivel Socket Organizer 3D Printed Icon 59745 59747 3\/8 SAE Metric Impact Socket Tray Mechanic Gift","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed Icon 3\/8\" SAE+Metric swivel socket tray drops straight into your Milwaukee Packout — loaded, labeled, done.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\n \u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n \u003cbr\u003e\n- One (1) 3D printed socket tray for Icon 59745 SAE + 59747 Metric swivel impact socket sets\u003cbr\u003e\n- Holds 22 sockets total: 12 SAE (5\/16\"–1\") and 10 Metric (10mm–19mm)\u003cbr\u003e\n- Tray color: Black or Red\u003cbr\u003e\n- Label color: Red, Black, or White embossed\u003cbr\u003e\n- Select your color combination from the listing options before adding to cart\u003cbr\u003e\n- Embossed size labels molded directly into the tray — no stickers, no fading\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8436 (Low-Profile Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use the tray standalone in any drawer, or add the optional dovetail-locking grid frame to lock multiple trays into a perfectly aligned system (see shop)\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\n \u003cbr\u003e\nThis tray is designed specifically for two Icon sets.\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive SAE Impact Swivel Socket Set, 12-Piece (Item 59745 \/ 56695)\u003cbr\u003e\n- Sizes: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\", 13\/16\", 7\/8\", 15\/16\", 1\"\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive Metric Impact Swivel Socket Set, 10-Piece (Item 59747 \/ 56696)\u003cbr\u003e\n- Sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nNOT UNIVERSAL — Pockets are precision-sized for Icon swivel impact socket bodies. The design accounts for the larger swivel head diameter. Standard sockets or other brands may not fit correctly.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n \u003cbr\u003e\nPETG is a tough, heat-resistant plastic — oil and grease-resistant, and handles garage heat without warping.\u003cbr\u003e\n \u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\n \u003cbr\u003e\nSelect your combination from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nEvery tray is test-fit with actual Icon sockets before shipping. Surface texture (layer lines) is normal for 3D-printed parts and does not affect fit or function.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n \u003cbr\u003e\n✓ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✓ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✓ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✓ Tool chest grid system — optional dovetail-locking grid frames keep every tray aligned in any standard drawer (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✓ Swivel-head specific pocket sizing — pockets are dimensioned for the larger swivel head diameter. Standard sockets from other brands may not seat correctly\u003cbr\u003e\n✓ Sockets stay put during transport — pockets hold sockets through vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✓ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✓ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✓ Available in black or red — labels in red, black, or white\u003cbr\u003e\n✓ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n✓ Rigid structure — won't compress or tear like foam inserts\u003c\/p\u003e\u003cbr\u003e\n \n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Compact Low-Profile (48-22-8436), Low-Profile (48-22-8431), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching SAE and metric companion trays that fit together into a complete organized system.\u003cbr\u003e\n \u003cbr\u003e\nThe tapered base lets you nest trays in deeper organizers or stack them in any tool chest drawer. Think Gridfinity, but purpose-built for a real workshop.\u003cbr\u003e\n \u003cbr\u003e\nCheck my shop for matching companion trays that fit together into a complete, organized system.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\n \u003cbr\u003e\n- Automotive technicians and serious DIYers running Icon swivel impact sockets\u003cbr\u003e\n- Anyone using Milwaukee Packout who wants every socket in its place\u003cbr\u003e\n- A great gift for him, gift for Dad, or a shop upgrade they'll actually use\u003cbr\u003e\n- Birthdays, Father's Day, Christmas, or any occasion where the toolbox needs some love\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFREQUENTLY ASKED QUESTIONS\u003cbr\u003e\n \u003cbr\u003e\nQ: Does this fit both the SAE and metric Icon swivel socket sets?\u003cbr\u003e\nA: Yes — this is a combined tray for both sets. It holds all 12 SAE sockets (59745, 5\/16\"–1\") and all 10 metric sockets (59747, 10mm–19mm) in one tray.\u003cbr\u003e\n \u003cbr\u003e\nQ: Will standard (non-swivel) sockets fit?\u003cbr\u003e\nA: No — the pockets are sized for swivel impact sockets, which are larger at the swivel head. Standard sockets won't be held securely. This tray is specifically for the 59745\/59747 swivel sets.\u003cbr\u003e\n \u003cbr\u003e\nQ: Does the Packout lid close fully with the tray loaded?\u003cbr\u003e\nA: Yes. The tray is designed for full lid clearance on all four compatible Packout organizers — 48-22-8435, 48-22-8436, 48-22-8431, and 48-22-8430.\u003cbr\u003e\n \u003cbr\u003e\nQ: Can I choose the color?\u003cbr\u003e\nA: Yes — select your tray color (black or red) and label color (red, black, or white) from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nQ: Are the sockets included?\u003cbr\u003e\nA: No. This is for the tray only. Icon 59745 and 59747 sets are sold separately at Harbor Freight.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\n \u003cbr\u003e\nNeed a tray for a set not in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700072169708,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700072202476,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700072235244,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700072268012,"sku":"ICN-001-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7860954691_p2cb.jpg?v=1780504329"},{"product_id":"bauer-modular-drawer-71125-icon-3-8-socket-tray-stl-files-sae-metric-harbor-freight-3d-print-files","title":"Bauer Modular Drawer 71125 Icon 3\/8 Socket Tray STL Files SAE Metric Harbor Freight 3D Print Files","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nWhen Harbor Freight announced the new modular drawer box for their storage system, I immediately wanted to move my Icon impact sockets over to it — it's a better fit in my truck than the Packout. The way they built the box, including the rivet placement, makes it a little more challenging to fit the tray, but once installed it's snug. This tray holds all of the 3\/8\" drive Icon standard and deep sockets in one place. Now you can print your own.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eStop hunting for the right socket. This ICON 3\/8\" SAE and metric impact socket tray drops straight into your Bauer Modular 71125 drawer — download the files, print them yourself, done.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL DOWNLOAD ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the digital STL files only. No physical tray will be shipped. After purchase, you'll receive an instant download link via Etsy — print it yourself on any 3D printer. Icon sockets and Bauer toolbox are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 3 STL files — instant download after purchase via Etsy:\u003cbr\u003e\n  · Socket tray (holds all 50 ICON 3\/8\" SAE and metric impact sockets)\u003cbr\u003e\n  · Rib spacer grid (keeps the tray level above the drawer floor ribs)\u003cbr\u003e\n  · Snap-in drawer label — slides into the built-in label slot on the Bauer 71125 drawer face; reads \"ICON 3\/8\" Drive Impact Sockets\"\u003cbr\u003e\n- Personal use license included\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR BAUER MODULAR 71125 — ONE DRAWER, ALL YOUR SOCKETS\u003cbr\u003e\n✔ Bauer Modular 2-Drawer Toolbox (SKU 71125) — tray drops straight in, drawer closes fully\u003cbr\u003e\n✔ Included spacer grid lifts the tray above the drawer's bottom ribs for a flush, stable fit\u003cbr\u003e\n✔ One tray fills one complete drawer — second drawer stays free\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray holds the complete ICON 3\/8\" Drive professional impact socket lineup across all four purchasable sets. Purchase all four to fill every pocket.\u003c\/p\u003e\n\n\u003cp\u003eSAE Standard (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59750 — ICON 3\/8\" Drive SAE Professional Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eSAE Deep (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59739 — ICON 3\/8\" Drive SAE Professional Deep Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 70432 — ICON 3\/8\" Drive Metric Professional Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 59756 — ICON 3\/8\" Drive Metric Professional Deep Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for ICON 3\/8\" professional impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eWant the printed version shipped to you? Find the printed version here:\u003cbr\u003e\nhttps:\/\/www.etsy.com\/listing\/4487923397\u003c\/p\u003e\n\n\u003cp\u003eNeed a different socket set or toolbox? Message me — I can usually design a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePRINT SPECS\u003cbr\u003e\nRecommended material: PETG — a tough, heat-resistant filament that handles garage heat and chemical exposure. PLA works for home use where heat and chemicals are not a concern.\u003cbr\u003e\nRecommended infill: 10–20% gyroid\u003cbr\u003e\nSupports required: No\u003cbr\u003e\nPrint orientation: Flat on bed, no rotation needed\u003cbr\u003e\nTested on: Creality K2 Plus, Ankermake M5C\u003c\/p\u003e\n\n\u003cp\u003eBed size and print time: The STL files are designed to be split in your slicer to fit your specific printer bed. Instructions are included — you choose how many pieces to cut the tray into based on your printer's build volume. Print time and filament use will vary based on your printer, material, layer height, and how many sections you cut. On a Creality K2 Plus at 0.2mm layer height with the tray split into two sections, expect roughly 24 hours of printing and approximately 600g of filament.\u003c\/p\u003e\n\n\u003cp\u003eNote on the spacer grid: Print at low infill (10–15%). It doesn't carry load — it just holds the tray level above the drawer ribs.\u003c\/p\u003e\n\n\u003cp\u003eNote on the drawer label: Designed for two-color printing — black base with red raised text. Single-color prints fine too — it still snaps in and functions perfectly.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Three-file system — tray + spacer grid + snap-in drawer label. Everything needed for a complete, labeled installation\u003cbr\u003e\n✔ Snap-in drawer label included — slides into the built-in Bauer label slot so you know what's in the drawer without opening it. No adhesive, no tools.\u003cbr\u003e\n✔ Slicer-splittable tray — cut the model into as many sections as your printer needs. No minimum bed size required.\u003cbr\u003e\n✔ One drawer, all 50 sockets — SAE and metric standard and deep, organized in one place\u003cbr\u003e\n✔ Recessed accessory storage — dedicated space at the back for extensions, adapters, and universal joints\u003cbr\u003e\n✔ Print in any color — match your toolbox or shop aesthetic\u003cbr\u003e\n✔ Precision fit for Bauer 71125 — designed and test-fit specifically for this drawer cavity\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed adjacent to every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ Large socket openings are by design — the largest sockets require a pocket that goes through the tray floor. The socket is retained securely from the sides.\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system — precision-fit trays designed around the tools you actually own, for the storage systems you actually use. Check my shop for other socket tray configurations and adapter frames.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run ICON 3\/8\" impact tools and want every socket organized in their Bauer Modular system. A great self-print project or gift for someone with a 3D printer — print it in their favorite color before giving. Ideal for birthdays, Father's Day, or any occasion where the toolbox needs a real upgrade.\u003c\/p\u003e\n\n\u003cp\u003eFREQUENTLY ASKED QUESTIONS\u003c\/p\u003e\n\n\u003cp\u003eIs this a physical product?\u003cbr\u003e\nNo — digital download only. You receive STL files to print yourself. Nothing is shipped. You'll get an instant download link via Etsy immediately after purchase.\u003c\/p\u003e\n\n\u003cp\u003eWhat files are included?\u003cbr\u003e\nThree STL files: the socket tray, the rib spacer grid, and the snap-in drawer label. All three are needed for a complete installation.\u003c\/p\u003e\n\n\u003cp\u003eWhat does the spacer grid do?\u003cbr\u003e\nThe Bauer 71125 drawer has raised ribs molded into the floor. Without a spacer, an insert tray would rock on those ribs. The spacer grid sits below the socket tray, fills that gap, and keeps the tray level and stable.\u003c\/p\u003e\n\n\u003cp\u003eWhat does the drawer label do?\u003cbr\u003e\nThe Bauer 71125 has a built-in label slot on the drawer face. The included label STL snaps directly into that slot — no adhesive, no hardware. Designed for two-color printing (black base, red raised text) but works fine in a single color too.\u003c\/p\u003e\n\n\u003cp\u003eWhat size printer do I need?\u003cbr\u003e\nAny FDM printer — the tray STL is designed to be split in your slicer into as many sections as your bed requires. Instructions are included. Tested on Creality K2 Plus and Ankermake M5C.\u003c\/p\u003e\n\n\u003cp\u003eHow long does it take to print?\u003cbr\u003e\nIt depends on your printer, material, layer height, and how many sections you cut the tray into. On a Creality K2 Plus at 0.2mm layer height split into two sections, expect roughly 24 hours and about 600g of filament. Faster printers or higher layer heights will reduce this significantly.\u003c\/p\u003e\n\n\u003cp\u003eWhat material should I use?\u003cbr\u003e\nPETG is recommended — it's a tough, heat-resistant material that handles garage heat and chemical exposure. PLA works fine for home workshop use.\u003c\/p\u003e\n\n\u003cp\u003eWill the sockets stay put?\u003cbr\u003e\nYes — pockets are dimensioned to hold ICON 3\/8\" impact sockets securely during vertical carry, vehicle transport, and accidental drops.\u003c\/p\u003e\n\n\u003cp\u003eCan I sell printed copies of this file?\u003cbr\u003e\nNo — personal use only. Printed items may not be sold, shared, or distributed. See license section below.\u003c\/p\u003e\n\n\u003cp\u003eWill it fit my [other brand] sockets?\u003cbr\u003e\nThis tray is designed specifically for ICON 3\/8\" professional impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me with your brand and model number before purchasing.\u003c\/p\u003e\n\n\u003cp\u003eCan I get a custom version for my socket set?\u003cbr\u003e\nYes — message me with your brand and model number. I can usually design and provide a custom file.\u003c\/p\u003e\n\n\u003cp\u003ePrint questions?\u003cbr\u003e\nMessage me — I respond quickly and love helping customers get a great result.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a different socket set or a different Harbor Freight drawer? Message me with the details — I can usually design and provide a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nThis is a digital file — no refunds after download. If you have questions about fit or print settings, message me before purchasing. I'm happy to help.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — this is intentional precision design, not a defect.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use only. These STL files may not be resold, redistributed, or shared in any form — digital or as printed objects — without written permission from MountaineerMaker. One license per purchase. Printed items made from these files may not be sold commercially.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you buy? Message me — I'm happy to confirm fit or answer print questions before you purchase. If your print turns out great, a quick review goes a long way for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700072595692,"sku":"BAU-001-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7920574304_4805.jpg?v=1780504332"},{"product_id":"bauer-modular-drawer-71125-icon-socket-organizer-3d-printed-3-8-sae-metric-complete-harbor-freight-impact-socket-tray-mechanic-gift","title":"Bauer Modular Drawer 71125 Icon Socket Organizer 3D Printed 3\/8 SAE Metric Complete Harbor Freight Impact Socket Tray Mechanic Gift","description":"\u003cp\u003ePrecision-fit tray for the complete ICON 3\/8\" SAE and metric professional impact socket lineup — all 50 sockets from all 4 sets, organized in one drawer of your Bauer Modular box 71125.\u003c\/p\u003e\n\n\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nWhen Harbor Freight announced the new modular drawer box for their storage system, I immediately wanted to move my Icon impact sockets over to it, since it's a better fit in my truck than the packout. The way they built the box, such as the rivet placement, makes it a little more challenging to fit the tray, but once installed, it's snug. This tray holds all of the 3\/8\" drive Icon std and deep sockets in one place.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Bauer toolbox are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG multipiece socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 50 ICON 3\/8\" professional impact sockets from the complete SAE + Metric lineup:\u003cbr\u003e\n  · 12 SAE standard (5\/16\"–1\") from ICON 59750\u003cbr\u003e\n  · 12 SAE deep (5\/16\"–1\") from ICON 59739\u003cbr\u003e\n  · 13 metric standard (7mm–19mm) from ICON 70432\u003cbr\u003e\n  · 13 metric deep (7mm–19mm) from ICON 59756\u003cbr\u003e\n- Recessed storage area at the back of the tray for extensions, adapters, and accessories\u003cbr\u003e\n- Size labels are embossed directly adjacent to every pocket\u003cbr\u003e\n- Replaces 2 separate Packout trays with one organized solution\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR BAUER MODULAR 71125 — ONE DRAWER, ALL YOUR SOCKETS\u003cbr\u003e\n✔ Bauer Modular 2-Drawer Toolbox (SKU 71125) — drops straight in, drawer closes fully\u003cbr\u003e\n✔ One tray fills one complete drawer\u003cbr\u003e\n✔ Second drawer stays free for additional tools, accessories, or a second tray\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed to hold the complete ICON 3\/8\" Drive professional impact socket lineup across all four purchasable sets. Purchase all four sets to fill every pocket.\u003c\/p\u003e\n\n\u003cp\u003eSAE Standard (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59750 — ICON 3\/8\" Drive SAE Professional Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eSAE Deep (12 sockets, 5\/16\"–1\"):\u003cbr\u003e\nItem 59739 — ICON 3\/8\" Drive SAE Professional Deep Impact Socket Set, 12-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 70432 — ICON 3\/8\" Drive Metric Professional Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (13 sockets, 7mm–19mm):\u003cbr\u003e\nItem 59756 — ICON 3\/8\" Drive Metric Professional Deep Impact Socket Set, 13-piece\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for ICON 3\/8\" professional impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eDon't see the set you need? Message me — I can design and print a custom tray for your exact socket lineup. These new Bauer drawers open up a lot of storage possibilities.\u003c\/p\u003e \n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ One drawer, all 50 sockets — replaces the 2 separate trays previously needed to organize the complete ICON 3\/8\" lineup\u003cbr\u003e\n✔ Recessed accessory storage — dedicated space at the back of the tray keeps extensions, adapters, and universal joints organized alongside the sockets\u003cbr\u003e\n✔ Precision-fit for the Bauer 71125 — designed and test-fit specifically for the Bauer Modular 2-Drawer Toolbox drawer cavity\u003cbr\u003e\n✔ SAE and metric together — one tray holds the complete professional impact lineup, not just one set\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed adjacent to every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: the largest sockets require an opening that goes all the way through the tray floor. The socket is retained securely from the sides.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system — precision-fit trays designed around the tools you actually own, for the storage systems you actually use. Check my shop for other socket tray configurations and adapter frames.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run ICON 3\/8\" impact tools and want every socket organized and at hand in their Bauer Modular system. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a serious upgrade.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set or toolbox not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific setup. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700072890604,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700072923372,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700072956140,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700072988908,"sku":"BAU-001-PHY","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7955820983_eez9.jpg?v=1780504335"},{"product_id":"milwaukee-impact-socket-organizer-for-packout-1-2-drive-shockwave-metric-deep-shallow-no-skip-complete-set","title":"Milwaukee Impact Socket Organizer for Packout, 1\/2\" Drive Shockwave Metric Deep \u0026 Shallow No-Skip Complete Set","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed two-tray stacking set holds your complete Milwaukee SHOCKWAVE 1\/2\" metric impact socket collection — every size from 10mm to 27mm, in both deep and standard depth, organized in a single deep Packout organizer.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray set only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 2 PETG socket trays (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Tray 1 (Base — Deep Sockets, 10mm–22mm): Holds 13 Milwaukee SHOCKWAVE 1\/2\" metric deep impact sockets. Sits in the base of the Packout organizer.\u003cbr\u003e\n- Tray 2 (Nested — Mixed, 10mm–27mm): Nests directly on top of Tray 1. Holds all 18 Milwaukee SHOCKWAVE 1\/2\" metric standard (shallow) impact sockets plus the 5 large deep impact sockets (23mm–27mm) that won't fit in Tray 1.\u003cbr\u003e\n- 36 sockets total across both trays\u003cbr\u003e\n- Elastic lifting handles on both trays — makes it easy to pull the loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n- Size labels embossed directly into every pocket on both trays\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — IMPORTANT NOTE ON COMPATIBILITY\u003cbr\u003e\nThis two-tray stacking set fits Milwaukee Packout Organizers — not the Low-Profile variants. The stacked height of both trays requires the full interior depth of the standard-depth organizer. Low-profile Packout lids will not close over the stacked set.\u003c\/p\u003e\n\n\u003cp\u003e✔ 48-22-8430 (Organizer) — deep socket tray drops in, standard tray nests on top, lid closes fully\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — same depth as 8430, stacked trays fit, lid closes fully\u003cbr\u003e\n✗ 48-22-8431 (Low-Profile Organizer) — NOT compatible, insufficient interior depth for two-tray stack\u003cbr\u003e\n✗ 48-22-8436 (Compact Low-Profile Organizer) — NOT compatible, insufficient interior depth for two-tray stack\u003cbr\u003e\n✔ Standard tool chest — use the stacked tray set in any drawer with sufficient depth, or add the optional dovetail-locking grid frame to lock trays into a perfectly aligned system (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nMilwaukee SHOCKWAVE 1\/2\" Drive 6-Point Metric Impact Sockets — 10mm to 27mm (18 sizes, both depths)\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee does not sell a single set covering this full range in both depths. This tray set is designed for the complete assembled collection, requiring a combination of sets and individual purchases. Sizes larger than 27mm are not accommodated.\u003c\/p\u003e\n\n\u003cp\u003eTRAY 1 — Base (Deep sockets, 10mm–22mm, 13 sockets):\u003cbr\u003e\n49-66-6271 — 10mm\u003cbr\u003e\n49-66-6272 — 11mm\u003cbr\u003e\n49-66-6273 — 12mm\u003cbr\u003e\n49-66-6274 — 13mm\u003cbr\u003e\n49-66-6275 — 14mm\u003cbr\u003e\n49-66-6276 — 15mm\u003cbr\u003e\n49-66-6277 — 16mm\u003cbr\u003e\n49-66-6278 — 17mm\u003cbr\u003e\n49-66-6279 — 18mm\u003cbr\u003e\n49-66-6280 — 19mm\u003cbr\u003e\n49-66-6281 — 20mm\u003cbr\u003e\n49-66-6282 — 21mm\u003cbr\u003e\n49-66-6283 — 22mm\u003c\/p\u003e\n\n\u003cp\u003eTRAY 2 — Nested (Mixed: standard 10mm–27mm + large deep 23mm–27mm, 23 sockets):\u003c\/p\u003e\n\n\u003cp\u003eStandard (shallow) sockets, 10mm–27mm (18 sockets):\u003cbr\u003e\n49-66-6242 — 10mm\u003cbr\u003e\n49-66-6243 — 11mm\u003cbr\u003e\n49-66-6244 — 12mm\u003cbr\u003e\n49-66-6245 — 13mm\u003cbr\u003e\n49-66-6246 — 14mm\u003cbr\u003e\n49-66-6247 — 15mm\u003cbr\u003e\n49-66-6248 — 16mm\u003cbr\u003e\n49-66-6249 — 17mm\u003cbr\u003e\n49-66-6250 — 18mm\u003cbr\u003e\n49-66-6251 — 19mm\u003cbr\u003e\n49-66-6252 — 20mm\u003cbr\u003e\n49-66-6253 — 21mm\u003cbr\u003e\n49-66-6254 — 22mm\u003cbr\u003e\n49-66-6255 — 23mm\u003cbr\u003e\n49-66-6256 — 24mm\u003cbr\u003e\n49-66-6257 — 25mm\u003cbr\u003e\n49-66-6258 — 26mm\u003cbr\u003e\n49-66-6259 — 27mm\u003c\/p\u003e\n\n\u003cp\u003eLarge deep sockets, 23mm–27mm (5 sockets):\u003cbr\u003e\n49-66-6284 — 23mm\u003cbr\u003e\n49-66-6285 — 24mm\u003cbr\u003e\n49-66-6286 — 25mm\u003cbr\u003e\n49-66-6287 — 26mm\u003cbr\u003e\n49-66-6288 — 27mm\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray set is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" metric impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.\u003c\/p\u003e\n\n\u003cp\u003eMatching 1\/2\" SAE socket tray set: https:\/\/www.etsy.com\/listing\/4477866151\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for trays covering other Milwaukee 1\/2\" socket combinations. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\n- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\n- Tray colors: Black or Red\u003cbr\u003e\n- Label colors: Red, Black, or White\u003cbr\u003e\n- Select your color combination from the purchase options.\u003cbr\u003e\n- Every tray is printed and test-fit before shipping.\u003cbr\u003e\n- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Two-tray stacking system — deep socket base tray sits on the bottom, mixed tray nests directly on top, both fit inside a single Milwaukee Packout Organizer (48-22-8430 or 48-22-8435)\u003cbr\u003e\n✔ Complete 1\/2\" metric coverage — 36 sockets total: 13 deep (10mm–22mm), 18 standard (10mm–27mm), and 5 large deep (23mm–27mm)\u003cbr\u003e\n✔ Elastic lifting handles — both trays include handles so you can pull the fully loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n✔ Lid closes fully on both compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest ready — use the stacked set in any drawer, or add the optional dovetail-locking grid frame for a perfectly aligned system (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — trays drop straight in and nest without fasteners\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray set is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any compatible Milwaukee Packout organizer — no measuring, no adapters. The tapered base lets you nest trays or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for the matching 1\/2\" SAE companion tray set and other drive-size options that fit together into a complete organized system.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray\/Black Text","offer_id":47700073054444,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/White Text","offer_id":47700073087212,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/Red Text","offer_id":47700073119980,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/White Text","offer_id":47700073152748,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7854401190_36zs.jpg?v=1780504337"},{"product_id":"milwaukee-impact-socket-organizer-for-packout-1-2-drive-shockwave-sae-deep-shallow-no-skip-complete-set","title":"Milwaukee Impact Socket Organizer for Packout, 1\/2\" Drive Shockwave SAE Deep \u0026 Shallow No-Skip Complete Set","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed two-tray stacking set holds your complete Milwaukee SHOCKWAVE 1\/2\" SAE impact socket collection — every size from 3\/8\" to 1-1\/2\", in both deep and standard depth, organized in a single deep Packout organizer.\u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray set only. Sockets, tools, and the Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 2 PETG socket trays (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Tray 1 (Base — Deep Sockets, 3\/8\"–1-3\/16\"): Holds 14 Milwaukee SHOCKWAVE 1\/2\" SAE deep impact sockets. Sits in the base of the Packout organizer.\u003cbr\u003e\n- Tray 2 (Nested — Mixed, 3\/8\"–1-1\/2\"): Nests directly on top of Tray 1. Holds all 19 Milwaukee SHOCKWAVE 1\/2\" SAE standard (shallow) impact sockets plus the 5 large deep impact sockets (1-1\/4\"–1-1\/2\") that won't fit in Tray 1.\u003cbr\u003e\n- 38 sockets total across both trays\u003cbr\u003e\n- Elastic lifting handles on both trays — make it easy to pull the loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n- Size labels embossed directly into every pocket on both trays\u003cbr\u003e\n- Note: 1-9\/16\" is not accommodated in either tray (see compatibility section)\u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — IMPORTANT NOTE ON COMPATIBILITY\u003cbr\u003e\nThis two-tray stacking set is designed for the deep Milwaukee Packout organizers only. The stacked height of both trays requires the full interior depth of the low-profile organizer — it will not fit the compact or standard organizers.\u003cbr\u003e\n \u003cbr\u003e\n✗  48-22-8431 (Low-Profile Organizer) — NOT compatible, insufficient interior depth\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — deep socket tray drops in, standard tray nests on top, lid closes fully\u003cbr\u003e\n✗ 48-22-8436 (Compact Low-Profile Organizer) — NOT compatible, insufficient interior depth\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — same stacking configuration, lid closes fully\u003cbr\u003e\n✔ Standard tool chest — use the stacked tray set in any drawer with sufficient depth, or add the optional dovetail-locking grid frame to lock trays into a perfectly aligned system (see shop)\u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\nMilwaukee SHOCKWAVE 1\/2\" Drive 6-Point SAE Impact Sockets — 3\/8\" to 1-1\/2\" (19 sizes, both depths)\u003cbr\u003e\n \u003cbr\u003e\nMilwaukee does not sell a single set covering this full range in both depths. This tray set is designed for the complete assembled collection, requiring a combination of sets and individual purchases.\u003cbr\u003e\n \u003cbr\u003e\nTRAY 1 — Base (Deep sockets, 3\/8\"–1-3\/16\", 14 sockets):\u003cbr\u003e\n49-66-6220 — 3\/8\"\u003cbr\u003e\n49-66-6221 — 7\/16\"\u003cbr\u003e\n49-66-6222 — 1\/2\"\u003cbr\u003e\n49-66-6223 — 9\/16\"\u003cbr\u003e\n49-66-6224 — 5\/8\"\u003cbr\u003e\n49-66-6225 — 11\/16\"\u003cbr\u003e\n49-66-6226 — 3\/4\"\u003cbr\u003e\n49-66-6227 — 13\/16\"\u003cbr\u003e\n49-66-6228 — 7\/8\"\u003cbr\u003e\n49-66-6229 — 15\/16\"\u003cbr\u003e\n49-66-6230 — 1\"\u003cbr\u003e\n49-66-6231 — 1-1\/16\"\u003cbr\u003e\n49-66-6232 — 1-1\/8\"\u003cbr\u003e\n49-66-6233 — 1-3\/16\"\u003cbr\u003e\n \u003cbr\u003e\nTRAY 2 — Nested (Mixed: standard 3\/8\"–1-1\/2\" + large deep 1-1\/4\"–1-1\/2\", 24 sockets):\u003cbr\u003e\n \u003cbr\u003e\nStandard (shallow) sockets, 3\/8\"–1-1\/2\" (19 sockets):\u003cbr\u003e\n49-66-6200 — 3\/8\"\u003cbr\u003e\n49-66-6201 — 7\/16\"\u003cbr\u003e\n49-66-6202 — 1\/2\"\u003cbr\u003e\n49-66-6203 — 9\/16\"\u003cbr\u003e\n49-66-6204 — 5\/8\"\u003cbr\u003e\n49-66-6205 — 11\/16\"\u003cbr\u003e\n49-66-6206 — 3\/4\"\u003cbr\u003e\n49-66-6207 — 13\/16\"\u003cbr\u003e\n49-66-6208 — 7\/8\"\u003cbr\u003e\n49-66-6209 — 15\/16\"\u003cbr\u003e\n49-66-6210 — 1\"\u003cbr\u003e\n49-66-6211 — 1-1\/16\"\u003cbr\u003e\n49-66-6212 — 1-1\/8\"\u003cbr\u003e\n49-66-6213 — 1-3\/16\"\u003cbr\u003e\n49-66-6214 — 1-1\/4\"\u003cbr\u003e\n49-66-6215 — 1-5\/16\"\u003cbr\u003e\n49-66-6216 — 1-3\/8\"\u003cbr\u003e\n49-66-6217 — 1-7\/16\"\u003cbr\u003e\n49-66-6218 — 1-1\/2\"\u003cbr\u003e\n \u003cbr\u003e\nLarge deep sockets, 1-1\/4\"–1-1\/2\" (5 sockets):\u003cbr\u003e\n49-66-6234 — 1-1\/4\"\u003cbr\u003e\n49-66-6235 — 1-5\/16\"\u003cbr\u003e\n49-66-6236 — 1-3\/8\"\u003cbr\u003e\n49-66-6237 — 1-7\/16\"\u003cbr\u003e\n49-66-6238 — 1-1\/2\"\u003cbr\u003e\n \u003cbr\u003e\n⚠️ 1-9\/16\" NOT INCLUDED — Milwaukee makes a 1-9\/16\" socket in both deep and standard depth, but this tray set does not accommodate that size. If you need the 1-9\/16\" included, message me.\u003cbr\u003e\n \u003cbr\u003e\n⚠️ NOT UNIVERSAL — This tray set is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" SAE impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.\u003c\/p\u003e\n\n\u003cp\u003eMetric Version of the dual tray impact set:  https:\/\/www.etsy.com\/listing\/4479432954\u003cbr\u003e\n \u003cbr\u003e\nCheck my shop for trays covering other Milwaukee 1\/2\" socket combinations. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\n- Tray colors: Black or Red\u003cbr\u003e\n- Label colors: Red, Black, or White\u003cbr\u003e\n- Select your color combination from the purchase options.\u003cbr\u003e\n- Every tray is printed and test-fit before shipping.\u003cbr\u003e\n- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Two-tray stacking system — deep socket base tray sits on the bottom, mixed tray nests directly on top, both fit inside a single deep Packout Low-Profile Organizer\u003cbr\u003e\n✔ Complete 1\/2\" SAE coverage — 38 sockets total: 14 deep (3\/8\"–1-3\/16\"), 19 standard (3\/8\"–1-1\/2\"), and 5 large deep (1-1\/4\"–1-1\/2\")\u003cbr\u003e\n✔ Elastic lifting handles — both trays include handles so you can pull the fully loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n✔ Lid closes fully on both compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest ready — use the stacked set in any drawer, or add the optional dovetail-locking grid frame for a perfectly aligned system (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — trays drop straight in and nest without fasteners\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n \u003cbr\u003e\nTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray set is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any compatible Milwaukee Packout organizer — no measuring, no adapters. The tapered base lets you nest trays or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching metric and multi-drive companion trays that fit together into a complete, organized system.\u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets, and I'm happy to help get your collection organized.\u003cbr\u003e\n \u003cbr\u003e\nPLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray\/Black Text","offer_id":47700073185516,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/White Text","offer_id":47700073218284,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/Red Text","offer_id":47700073251052,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/White Text","offer_id":47700073283820,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7901744149_gy53.jpg?v=1780504339"},{"product_id":"3d-printed-icon-59745-59747-3-8-sae-metric-swivel-socket-tray-milwaukee-packout-48-22-8431-48-22-8435-48-22-8436-48-22-8430","title":"3D Printed Icon 59745\/59747 3\/8\" SAE+Metric Swivel Socket Tray - Milwaukee Packout 48-22-8431 \/ 48-22-8435 \/ 48-22-8436 \/ 48-22-8430","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed Icon 3\/8\" SAE+Metric swivel socket tray drops straight into your Milwaukee Packout — loaded, labeled, done.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\n \u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n \u003cbr\u003e\n- One (1) 3D printed socket tray for Icon 59745 SAE + 59747 Metric swivel impact socket sets\u003cbr\u003e\n- Holds 22 sockets total: 12 SAE (5\/16\"–1\") and 10 Metric (10mm–19mm)\u003cbr\u003e\n- Tray color: Black or Red\u003cbr\u003e\n- Label color: Red, Black, or White embossed\u003cbr\u003e\n- Select your color combination from the listing options before adding to cart\u003cbr\u003e\n- Embossed size labels molded directly into the tray — no stickers, no fading\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n \u003cbr\u003e\n✓ 48-22-8435 (Low-Profile Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✓ 48-22-8436 (Low-Profile Small Parts Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✓ 48-22-8431 (Large Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✓ 48-22-8430 (Drawer Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✓ Standard tool chest — use with the optional dovetail-locking grid frame (see shop)\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\n \u003cbr\u003e\nThis tray is designed specifically for two Icon sets.\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive SAE Impact Swivel Socket Set, 12-Piece (Item 59745 \/ 56695)\u003cbr\u003e\n- Sizes: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\", 13\/16\", 7\/8\", 15\/16\", 1\"\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nICON 3\/8\" Drive Metric Impact Swivel Socket Set, 10-Piece (Item 59747 \/ 56696)\u003cbr\u003e\n- Sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\n- Chrome-moly steel, 6-point, black phosphate finish, swivels up to 30°, lifetime warranty\u003cbr\u003e\n \u003cbr\u003e\nNOT UNIVERSAL — Pockets are precision-sized for Icon swivel impact socket bodies. The design accounts for the larger swivel head diameter. Standard sockets or other brands may not fit correctly.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n \u003cbr\u003e\nPETG is a tough, heat-resistant plastic — oil and grease-resistant, and handles garage heat without warping.\u003cbr\u003e\n \u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\n \u003cbr\u003e\nSelect your combination from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nEvery tray is test-fit with actual Icon sockets before shipping. Surface texture (layer lines) is normal for 3D-printed parts and does not affect fit or function.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n \u003cbr\u003e\n✓ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✓ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✓ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✓ Tool chest grid system — optional dovetail-locking grid frames keep every tray aligned in any standard drawer (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✓ Swivel-head specific pocket sizing — pockets are dimensioned for the larger swivel head diameter. Standard sockets from other brands may not seat correctly\u003cbr\u003e\n✓ Sockets stay put during transport — pockets hold sockets through vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✓ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✓ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✓ Available in black or red — labels in red, black, or white\u003cbr\u003e\n✓ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n✓ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Compact Low-Profile (48-22-8436), Low-Profile (48-22-8431), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching SAE and metric companion trays that fit together into a complete organized system.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\n \u003cbr\u003e\n- Automotive technicians and serious DIYers running Icon swivel impact sockets\u003cbr\u003e\n- Anyone using Milwaukee Packout who wants every socket in its place\u003cbr\u003e\n- A great gift for him, gift for Dad, or a shop upgrade they'll actually use\u003cbr\u003e\n- Birthdays, Father's Day, Christmas, or any occasion where the toolbox needs some love\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nFREQUENTLY ASKED QUESTIONS\u003cbr\u003e\n \u003cbr\u003e\nQ: Does this fit both the SAE and metric Icon swivel socket sets?\u003cbr\u003e\nA: Yes — this is a combined tray for both sets. It holds all 12 SAE sockets (59745, 5\/16\"–1\") and all 10 metric sockets (59747, 10mm–19mm) in one tray.\u003cbr\u003e\n \u003cbr\u003e\nQ: Will standard (non-swivel) sockets fit?\u003cbr\u003e\nA: No — the pockets are sized for swivel impact sockets, which are larger at the swivel head. Standard sockets won't be held securely. This tray is specifically for the 59745\/59747 swivel sets.\u003cbr\u003e\n \u003cbr\u003e\nQ: Does the Packout lid close fully with the tray loaded?\u003cbr\u003e\nA: Yes. The tray is designed for full lid clearance on all four compatible Packout organizers — 48-22-8435, 48-22-8436, 48-22-8431, and 48-22-8430.\u003cbr\u003e\n \u003cbr\u003e\nQ: Can I choose the color?\u003cbr\u003e\nA: Yes — select your tray color (black or red) and label color (red, black, or white) from the listing options before adding to cart.\u003cbr\u003e\n \u003cbr\u003e\nQ: Are the sockets included?\u003cbr\u003e\nA: No. This is for the tray only. Icon 59745 and 59747 sets are sold separately at Harbor Freight.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\n \u003cbr\u003e\nNeed a tray for a set not in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700073545964,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700073578732,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700073611500,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Letter","offer_id":47700073644268,"sku":"ICN-002-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7933542285_dygj.jpg?v=1780504343"},{"product_id":"icon-3-8-drive-metric-sae-and-swivel-impact-socket-tray-set-for-packout-organizers","title":"Icon 3\/8\" Drive Metric, SAE, and Swivel Impact Socket Tray Set for Packout Organizers","description":"\u003cp\u003eMilwaukee Packout Socket Organizer Set – 3\/8\" Harbor Freight Impact Sockets (SAE, Metric, Swivel, Deep and Standard)\u003c\/p\u003e\n\n\u003cp\u003e3D-printed, single-piece PETG (tough, heat-resistant material) organizer trays designed specifically for Harbor Freight Icon 3\/8\" drive impact sockets, precision-fit for the Milwaukee Packout Organizers (48-22-8430, 48-22-8431, 48-22-8435, or 48-22-8436).\u003c\/p\u003e\n\n\u003cp\u003eSquare design to accommodate storage in standard tool chest drawers as well.\u003c\/p\u003e\n\n\u003cp\u003eEvery socket has a dedicated, clearly labeled location — no filler slots, no wasted space, and no rattling during transport.\u003c\/p\u003e\n\n\u003cp\u003eOrganizer trays only. Tools and Packout case not included.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS FITS\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee Packout\u003cbr\u003e\n• 48-22-8430\u003cbr\u003e\n• 48-22-8431\u003cbr\u003e\n• 48-22-8435\u003cbr\u003e\n• 48-22-8436\u003c\/p\u003e\n\n\u003cp\u003eHarbor Freight Icon 3\/8\" Drive Impact Sockets\u003cbr\u003e\n• SAE: 5\/16\" – 1\" (deep and shallow) I2SS-12 59750\/56206  and I2DS-12 59739\/56207 \u003cbr\u003e\n• Metric: 7mm – 19mm (deep and shallow) I2SM-13 70432,56209 and I2DM-13 59756, 56208\u003cbr\u003e\n• SAE Swivel: 5\/16\" – 1\" I2US-12 59745\/56695\u003cbr\u003e\n• Metric Swivel: 10mm - 19mm I2UM-10 59747, 56696\u003c\/p\u003e\n\n\u003cp\u003eDesigned so every socket size has a specific, labeled location — no skipped sizes and no unused pockets.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ Not universal. These trays are dimensioned specifically for Harbor Freight Icon 3\/8\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCAPACITY\u003c\/p\u003e\n\n\u003cp\u003e• Additional storage for common accessories such as:\u003cbr\u003e\n– Ratchets\u003cbr\u003e\n– Extensions\u003cbr\u003e\n– Universal \/ swivel\u003c\/p\u003e\n\n\u003cp\u003eInterchangeable Configurations\u003cbr\u003e\n• SAE or Metric\u003cbr\u003e\n• Fits the left or right side of the dual organizer\u003cbr\u003e\n• Fits both shallow and deep organizers\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCONFIGURATION OPTIONS\u003c\/p\u003e\n\n\u003cp\u003eComplete Set – $165\u003cbr\u003e\n• Includes SAE tray, Metric tray, Swivel tray (both SAE and Metric)\u003cbr\u003e\n• Also includes spacer storage trays required for the deep organizers\u003cbr\u003e\n• The entire set fits into 48-22-8430\u003cbr\u003e\n---\u003c\/p\u003e\n\n\u003cp\u003eDESIGN \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\n\u003cp\u003e• Single-piece, full-size print\u003cbr\u003e\n• No glued sections or bonded parts\u003c\/p\u003e\n\n\u003cp\u003e• Printed in PETG — a tough, heat-resistant material:\u003cbr\u003e\n– More impact-resistant than PLA\u003cbr\u003e\n– Better heat tolerance for vehicle storage\u003cbr\u003e\n– Oil and grease resistant\u003cbr\u003e\n– Will not soften or warp in hot vehicles like PLA\u003c\/p\u003e\n\n\u003cp\u003e• Socket pockets are designed to retain sockets during transport, including:\u003cbr\u003e\n– Vertical carry\u003cbr\u003e\n– Vehicle movement\u003cbr\u003e\n– Accidental drops\u003c\/p\u003e\n\n\u003cp\u003e• Clear, printed size labels\u003cbr\u003e\n• Rigid structure — does not compress or tear like foam\u003cbr\u003e\n• Designed to fully close the Packout lid without interference\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed, inspected, and test-fit using real Harbor Freight Icon impact sockets before shipping.\u003c\/p\u003e\n\n\u003cp\u003eMade in West Virginia, USA.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eABOUT 3D PRINTING SURFACE FINISH\u003c\/p\u003e\n\n\u003cp\u003eThese organizers are produced using professional-grade 3D printing. Unlike injection-molded plastic, 3D-printed parts may show minor surface characteristics that are normal for the process.\u003c\/p\u003e\n\n\u003cp\u003e• Visible layer lines and slight texture variations are normal\u003cbr\u003e\n• Small cosmetic marks or surface inconsistencies may be present\u003cbr\u003e\n• These do not affect strength, fit, or function\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed for durability and real-world jobsite use — appearance may vary slightly from tray to tray, but performance remains consistent.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSTL FILES ALSO AVAILABLE\u003c\/p\u003e\n\n\u003cp\u003eIf you prefer to print your own trays, digital STL files are available for purchase in our shop.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for fully printed, ready-to-use organizers — no printing, tuning, or test-fitting required.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eOTHER BRANDS OR CUSTOM REQUESTS\u003c\/p\u003e\n\n\u003cp\u003eThese trays are designed for Harbor Freight Icon 3\/8\" impact sockets only.\u003c\/p\u003e\n\n\u003cp\u003eIf you use a different socket brand or want a tray for another Packout model, feel free to message us. We're open to:\u003cbr\u003e\n• Custom designs\u003cbr\u003e\n• Individual Trays\u003cbr\u003e\n• Other socket brands\u003cbr\u003e\n• Suggestions for future organizers\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSHIPPING\u003c\/p\u003e\n\n\u003cp\u003e• Made to order\u003cbr\u003e\n• Ships in 3–5 business days\u003cbr\u003e\n• Carefully packaged to prevent damage during transit\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":47700073677036,"sku":"ICN-003-PHY","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7857590745_i7ag.jpg?v=1780504345"},{"product_id":"packout-storage-spacer-tray","title":"Packout Storage \/ Spacer Tray","description":"\u003cp\u003eA blank PETG filler tray for the empty space in your Milwaukee Packout drawer. Levels out a partial socket set so nothing slides around, and squares up the drawer when a set doesn't fill it. Designed, printed, inspected, and test-fit in West Virginia.\u003c\/p\u003e\u003cp\u003eThis listing is for the spacer tray only — sockets, tools, and toolbox are not included.\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Black","offer_id":47746050916588,"sku":"MM-SPACER-PACKOUT-BLK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":47746050949356,"sku":"MM-SPACER-PACKOUT-RED","price":22.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/mountaineermaker.com\/collections\/by-your-storage-harbor-freight-bauer.oembed?page=2","provider":"Mountaineer Maker","version":"1.0","type":"link"}