{"title":"MILWAUKEE","description":"","products":[{"product_id":"milwaukee-packout-socket-organizer-3d-printed-1-2-shockwave-metric-shallow-impact-socket-tray-29-sockets-8mm-to-36mm-gift-for-him","title":"Milwaukee Packout Socket Organizer, 3D Printed, 1\/2 Shockwave Metric Shallow Impact Socket Tray 29 Sockets 8mm to 36mm, Gift for Him","description":"\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nWe finally have it! The std depth 1\/2\" Milwaukee Shockwave impact socket tray covering the entire range of sockets from 8mm to 36mm. This is the partner to our popular deep socket version. Due to the length of the larger sizes in this set, this tray won't fit the compact Packout organizers. In order to use the tray in the deep organizers and keep the sockets in place, an optional spacer tray is available and will allow the Packout lid to keep the sockets in place.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-fit tray for every available Milwaukee SHOCKWAVE 1\/2\" standard depth metric impact socket — all 29 sizes from 8mm through 36mm, no sizes skipped. The standard depth companion to our 49-66-7015 deep metric tray.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eFITS DEEP PACKOUT ORGANIZERS ONLY — SPECIAL SPACER TRAY REQUIRED\u003cbr\u003e\nStandard depth sockets are shorter than deep sockets. This tray requires a custom spacer tray to fit correctly in the deep Packout organizer — the spacer fills the height gap so the lid closes properly and sockets stay put.\u003c\/p\u003e\n\n\u003cp\u003e✔ 48-22-8430 (Organizer) — with special spacer tray (select \"Tray + Special Spacer\" above)\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — with special spacer tray (select \"Tray + Special Spacer\" above)\u003cbr\u003e\n✘ 48-22-8431 (Low-Profile Organizer) — DOES NOT FIT\u003cbr\u003e\n✘ 48-22-8436 (Compact Low-Profile Organizer) — DOES NOT FIT\u003c\/p\u003e\n\n\u003cp\u003eThis custom spacer is designed specifically for this tray — it is not the same as the universal storage base spacer available elsewhere in my shop.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 29 Milwaukee SHOCKWAVE 1\/2\" standard depth metric impact sockets (8mm–36mm, every size)\u003cbr\u003e\n- Size labels embossed on the tray surface next to every pocket — readable at a glance\u003cbr\u003e\n- Optional: add the custom special spacer tray by selecting \"Tray + Storage Spacer\" from the options\u003c\/p\u003e\n\n\u003cp\u003eALL 29 SOCKET PART NUMBERS\u003cbr\u003e\n  8mm (49-66-6240) — individual purchase\u003cbr\u003e\n  9mm (49-66-6241) — individual purchase\u003cbr\u003e\n  10mm (49-66-6242) — from 49-66-6804 set\u003cbr\u003e\n  11mm (49-66-6243) — from 49-66-6804 set\u003cbr\u003e\n  12mm (49-66-6244) — from 49-66-6804 set\u003cbr\u003e\n  13mm (49-66-6245) — from 49-66-6804 set\u003cbr\u003e\n  14mm (49-66-6246) — from 49-66-6804 set\u003cbr\u003e\n  15mm (49-66-6247) — from 49-66-6804 set\u003cbr\u003e\n  16mm (49-66-6248) — from 49-66-6804 set\u003cbr\u003e\n  17mm (49-66-6249) — from 49-66-6804 set\u003cbr\u003e\n  18mm (49-66-6250) — from 49-66-6804 set\u003cbr\u003e\n  19mm (49-66-6251) — from 49-66-6804 set\u003cbr\u003e\n  20mm (49-66-6252) — from 49-66-6804 set\u003cbr\u003e\n  21mm (49-66-6253) — from 49-66-6804 set\u003cbr\u003e\n  22mm (49-66-6254) — from 49-66-6804 set\u003cbr\u003e\n  23mm (49-66-6255) — individual purchase\u003cbr\u003e\n  24mm (49-66-6256) — from 49-66-6804 set\u003cbr\u003e\n  25mm (49-66-6257) — individual purchase\u003cbr\u003e\n  26mm (49-66-6258) — individual purchase\u003cbr\u003e\n  27mm (49-66-6259) — individual purchase\u003cbr\u003e\n  28mm (49-66-6260) — individual purchase\u003cbr\u003e\n  29mm (49-66-6261) — individual purchase\u003cbr\u003e\n  30mm (49-66-6262) — individual purchase\u003cbr\u003e\n  31mm (49-66-6263) — individual purchase\u003cbr\u003e\n  32mm (49-66-6264) — individual purchase\u003cbr\u003e\n  33mm (49-66-6265) — individual purchase\u003cbr\u003e\n  34mm (49-66-6266) — individual purchase\u003cbr\u003e\n  35mm (49-66-6267) — individual purchase\u003cbr\u003e\n  36mm (49-66-6268) — individual purchase\u003c\/p\u003e\n\n\u003cp\u003eHOW TO SOURCE ALL 29 SOCKETS\u003cbr\u003e\nMilwaukee does not bundle all 29 standard depth 1\/2\" metric sizes in a single set. Most efficient path:\u003c\/p\u003e\n\n\u003cp\u003eSTEP 1 — Buy the 49-66-6804 set: covers 14 of the 29 metric sizes (10–22mm + 24mm, plus 13 SAE sockets).\u003c\/p\u003e\n\n\u003cp\u003eSTEP 2 — Buy these 15 sizes individually:\u003cbr\u003e\n8mm (49-66-6240) · 9mm (49-66-6241) · 23mm (49-66-6255)\u003cbr\u003e\n25mm (49-66-6257) · 26mm (49-66-6258) · 27mm (49-66-6259) · 28mm (49-66-6260)\u003cbr\u003e\n29mm (49-66-6261) · 30mm (49-66-6262) · 31mm (49-66-6263) · 32mm (49-66-6264)\u003cbr\u003e\n33mm (49-66-6265) · 34mm (49-66-6266) · 35mm (49-66-6267) · 36mm (49-66-6268)\u003c\/p\u003e\n\n\u003cp\u003eAll individual sockets available at Milwaukee, Home Depot, Acme Tools, and other Milwaukee retailers. Message me if you have sourcing questions before ordering.\u003c\/p\u003e\n\n\u003cp\u003eSTANDARD DEPTH vs. DEEP — WHAT'S THE DIFFERENCE?\u003cbr\u003e\nStandard depth sockets have a shallower internal hex engagement cavity than deep sockets of the same size. For the smaller sizes (8–16mm), the overall socket length is noticeably shorter. For the larger sizes (17–36mm), the overall socket length happens to be the same as the deep version, but the hex cavity is shallower. If you need to reach a recessed fastener, you want the deep socket. For most surface-level work and tight spaces, standard depth is ideal.\u003c\/p\u003e\n\n\u003cp\u003eNeed the deep metric companion tray instead?\u003cbr\u003e\nhttps:\/\/www.etsy.com\/listing\/4486550713\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping.\u003cbr\u003e\nTray colors: Black or Red · Label colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Every available size — all 29 Milwaukee SHOCKWAVE 1\/2\" standard depth metric sockets from 8mm through 36mm\u003cbr\u003e\n✔ Standard depth companion — pairs with the deep metric tray for complete depth coverage\u003cbr\u003e\n✔ Custom spacer available — purpose-built to raise this tray to the correct height in the deep Packout\u003cbr\u003e\n✔ Surface labels — size markings embossed on the tray surface next to every pocket\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require an opening through the tray floor — intentional precision engineering, not a defect. The socket is retained securely from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions? Message me before ordering. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Black Tray\/White Ltr \/ Storage\/Spacer Tray","offer_id":47700069712108,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/White Ltr \/ Socket Tray Only","offer_id":47700069744876,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/Red Ltr \/ Storage\/Spacer Tray","offer_id":47700069777644,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/Red Ltr \/ Socket Tray Only","offer_id":47700069810412,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/White Ltr \/ Storage\/Spacer Tray","offer_id":47700069843180,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/White Ltr \/ Socket Tray Only","offer_id":47700069875948,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/Black Ltr \/ Storage\/Spacer Tray","offer_id":47700069908716,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/Black Ltr \/ Socket Tray Only","offer_id":47700069941484,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Red Storage Tray \/ Storage\/Spacer Tray","offer_id":47700069974252,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Red Storage Tray \/ Socket Tray Only","offer_id":47700070007020,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Black Storage Tray \/ Storage\/Spacer Tray","offer_id":47700070039788,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Black Storage Tray \/ Socket Tray Only","offer_id":47700070072556,"sku":"MIL-001-PHY","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.8079857456_5quk.jpg?v=1780504301"},{"product_id":"milwaukee-impact-socket-organizer-for-packout-low-profile-3-8-drive-no-skip","title":"Milwaukee Impact Socket Organizer for Packout Low Profile, 3\/8\" Drive No-Skip","description":"\u003cp\u003eMilwaukee Packout Socket Organizer – 3\/8\" Impact Sockets (SAE \u0026amp; Metric, PETG — heat-resistant material)\u003c\/p\u003e\n\n\u003cp\u003e3D-printed, single-piece PETG (tough, heat-resistant material) organizer trays designed specifically for Milwaukee 3\/8\" drive impact sockets, precision-fit for the Milwaukee Packout Low-Profile Organizers (48-22-8431 or 48-22-8436).\u003c\/p\u003e\n\n\u003cp\u003eEvery socket has a dedicated, clearly labeled location — no filler slots, no wasted space, and no rattling during transport.\u003c\/p\u003e\n\n\u003cp\u003eOrganizer trays only. Tools and Packout case not included.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eWHAT THIS FITS\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee Packout\u003cbr\u003e\n• 48-22-8431\u003cbr\u003e\n• 48-22-8436\u003cbr\u003e\n(Low-Profile Organizers)\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee 3\/8\" Drive Impact Sockets\u003cbr\u003e\n• SAE: 1\/4\" – 1\" (deep and shallow)\u003cbr\u003e\n• Metric: 6mm – 24mm (deep and shallow)\u003c\/p\u003e\n\n\u003cp\u003eDesigned so every socket size has a specific, labeled location — no skipped sizes and no unused pockets.\u003c\/p\u003e\n\n\u003cp\u003e⚠️ Not universal. These trays are dimensioned specifically for Milwaukee 3\/8\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCAPACITY\u003c\/p\u003e\n\n\u003cp\u003eComplete Set Capacity (SAE + Metric)\u003cbr\u003e\n• 68 total sockets\u003cbr\u003e\n– 30 SAE (15 sizes, deep and shallow)\u003cbr\u003e\n– 38 Metric (19 sizes, deep and shallow)\u003c\/p\u003e\n\n\u003cp\u003e• Additional storage for common accessories such as:\u003cbr\u003e\n– 3\/8\" impact adaptor\u003cbr\u003e\n– Extensions\u003cbr\u003e\n– Universal \/ swivel\u003c\/p\u003e\n\n\u003cp\u003eInterchangeable Single Compartment\u003cbr\u003e\n• SAE or Metric\u003cbr\u003e\n• Fits left or right side of the organizer\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eCONFIGURATION OPTIONS\u003c\/p\u003e\n\n\u003cp\u003eComplete Set – $80\u003cbr\u003e\n• Includes one SAE tray and one Metric tray\u003cbr\u003e\n• Fills both compartments of one Low-Profile Organizer\u003c\/p\u003e\n\n\u003cp\u003eSingle Compartment – $45\u003cbr\u003e\n• Includes one tray only\u003cbr\u003e\n• Choose SAE or Metric\u003cbr\u003e\n• Compatible with either side of the organizer\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eDESIGN \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\n\u003cp\u003e• Single-piece, full-size print\u003cbr\u003e\n• No glued sections or bonded parts\u003c\/p\u003e\n\n\u003cp\u003e• Printed in PETG — a tough, heat-resistant material:\u003cbr\u003e\n– More impact-resistant than PLA\u003cbr\u003e\n– Better heat tolerance for vehicle storage\u003cbr\u003e\n– Oil and grease resistant\u003cbr\u003e\n– Will not soften or warp in hot vehicles like PLA\u003c\/p\u003e\n\n\u003cp\u003e• Socket pockets are designed to retain sockets during transport, including:\u003cbr\u003e\n– Vertical carry\u003cbr\u003e\n– Vehicle movement\u003cbr\u003e\n– Accidental drops\u003c\/p\u003e\n\n\u003cp\u003e• Clear, printed size labels\u003cbr\u003e\n• Rigid structure — does not compress or tear like foam\u003cbr\u003e\n• Designed to fully close the Packout lid without interference\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed, inspected, and test-fit using real Milwaukee impact sockets before shipping.\u003c\/p\u003e\n\n\u003cp\u003eMade in West Virginia, USA.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eABOUT 3D PRINTING SURFACE FINISH\u003c\/p\u003e\n\n\u003cp\u003eThese organizers are produced using professional-grade 3D printing. Unlike injection-molded plastic, 3D-printed parts may show minor surface characteristics that are normal for the process.\u003c\/p\u003e\n\n\u003cp\u003e• Visible layer lines and slight texture variations are normal\u003cbr\u003e\n• Small cosmetic marks or surface inconsistencies may be present\u003cbr\u003e\n• These do not affect strength, fit, or function\u003c\/p\u003e\n\n\u003cp\u003eEach tray is printed for durability and real-world jobsite use — appearance may vary slightly from tray to tray, but performance remains consistent.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSTL FILES ALSO AVAILABLE\u003c\/p\u003e\n\n\u003cp\u003eIf you prefer to print your own trays, digital STL files are sold separately in our shop.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for fully printed, ready-to-use organizers — no printing, tuning, or test-fitting required.\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eOTHER BRANDS OR CUSTOM REQUESTS\u003c\/p\u003e\n\n\u003cp\u003eThese trays are designed for Milwaukee 3\/8\" impact sockets only.\u003c\/p\u003e\n\n\u003cp\u003eIf you use a different socket brand or want a tray for another Packout model, feel free to message us. We're open to:\u003cbr\u003e\n• Custom designs\u003cbr\u003e\n• Other socket brands\u003cbr\u003e\n• Suggestions for future organizers\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSHIPPING\u003c\/p\u003e\n\n\u003cp\u003e• Made to order\u003cbr\u003e\n• Ships in 3–5 business days\u003cbr\u003e\n• Carefully packaged to prevent damage during transit\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003eSUMMARY (QUICK SCAN)\u003c\/p\u003e\n\n\u003cp\u003e✓ Fits Milwaukee Packout Low-Profile Organizers (48-22-8431 \/ 48-22-8436)\u003cbr\u003e\n✓ Designed for Milwaukee 3\/8\" drive impact sockets\u003cbr\u003e\n✓ Holds complete SAE and\/or Metric sets (68 sockets total)\u003cbr\u003e\n✓ Retains sockets during vertical transport and jobsite handling\u003cbr\u003e\n✓ Single-piece PETG construction\u003cbr\u003e\n✓ Printed trays or DIY STL files available\u003cbr\u003e\n✓ Not universal — Milwaukee-specific by design\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"SAE Tray Only \/ Black Top\/Red Letter","offer_id":47700070138092,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"SAE Tray Only \/ Red Top\/Black Letter","offer_id":47700070170860,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Metric Tray Only \/ Black Top\/Red Letter","offer_id":47700070203628,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Metric Tray Only \/ Red Top\/Black Letter","offer_id":47700070236396,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Set  - Metric \u0026 SAE \/ Black Top\/Red Letter","offer_id":47700070269164,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Set  - Metric \u0026 SAE \/ Red Top\/Black Letter","offer_id":47700070301932,"sku":"MIL-002-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7841294862_j4m3.jpg?v=1780504303"},{"product_id":"milwaukee-packout-socket-organizer-3d-printed-1-2-shockwave-sae-deep-impact-socket-tray-49-66-7012-gift-for-him","title":"Milwaukee Packout Socket Organizer 3D Printed 1\/2 Shockwave SAE Deep Impact Socket Tray 49-66-7012  Gift for Him","description":"\u003cp\u003ePrecision-fit tray for the complete Milwaukee SHOCKWAVE 1\/2\" SAE deep impact socket lineup — 3\/8\" through 1-9\/16\", all 20 sockets — drops straight into your Milwaukee Packout deep organizer.\u003c\/p\u003e\n\n\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nI wanted to offer a storage solution for the entire available range of the Milwaukee Shockwave 1\/2\" impact sockets. It will only fit in the deep Packout organizers. All of the sockets in the 49-66-7012 set fit in the tray with an additional space for the 1-9\/16\" socket only available from Milwaukee individually.\u003c\/p\u003e\n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-fit tray for the complete Milwaukee SHOCKWAVE 1\/2\" SAE deep impact socket lineup — 3\/8\" through 1-9\/16\", all 20 sockets — drops straight into your Milwaukee Packout deep organizer.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 20 Milwaukee SHOCKWAVE 1\/2\" SAE deep impact sockets — 3\/8\" through 1-9\/16\", no sizes skipped\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — DEEP ORGANIZERS ONLY\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit 48-22-8431 (Low-Profile Organizer) or 48-22-8436 (Compact Low-Profile Organizer) — this tray is designed for the deeper cavity of the 48-22-8430 and 48-22-8435 only.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed for the complete Milwaukee SHOCKWAVE 1\/2\" Drive SAE deep impact socket lineup — 20 sockets, 3\/8\" through 1-9\/16\".\u003c\/p\u003e\n\n\u003cp\u003eThe Milwaukee 49-66-7012 (19pc set, 3\/8\"–1-1\/2\") fills 19 of the 20 pockets. The final size — 1-9\/16\" (49-66-6239) — is purchased individually from Milwaukee and is not available in any set.\u003c\/p\u003e \n\n\u003cp\u003eIndividual socket part numbers:\u003cbr\u003e\n3\/8\" (49-66-6220) · 7\/16\" (49-66-6221) · 1\/2\" (49-66-6222) · 9\/16\" (49-66-6223) · 5\/8\" (49-66-6224) · 11\/16\" (49-66-6225) · 3\/4\" (49-66-6226) · 13\/16\" (49-66-6227) · 7\/8\" (49-66-6228) · 15\/16\" (49-66-6229) · 1\" (49-66-6230) · 1-1\/16\" (49-66-6231) · 1-1\/8\" (49-66-6232) · 1-3\/16\" (49-66-6233) · 1-1\/4\" (49-66-6234) · 1-5\/16\" (49-66-6235) · 1-3\/8\" (49-66-6236) · 1-7\/16\" (49-66-6237) · 1-1\/2\" (49-66-6238) · 1-9\/16\" (49-66-6239 — individual)\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for the matching Milwaukee SHOCKWAVE 1\/2\" metric deep companion tray:\u003cbr\u003e\nhttps:\/\/mountaineermaker.etsy.com\/listing\/4486550713\u003c\/p\u003e\n\n\u003cp\u003eDon't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Complete no-skip SAE lineup — every Milwaukee 1\/2\" SAE deep impact socket size from 3\/8\" through 1-9\/16\", including the 1-9\/16\" that no set covers\u003cbr\u003e\n✔ Built for the deep Packout organizers — designed specifically for the 48-22-8430 and 48-22-8435\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: The largest sockets require an opening that goes all the way through the tray floor. This is intentional — the socket diameter exactly matches the pocket width, so it seats fully and is retained securely.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they work across Milwaukee Packout deep organizers (48-22-8430 and 48-22-8435) and drawer units with the right adapter. Check my shop for the matching 1\/2\" metric deep companion tray and other socket tray combinations.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run 1\/2\" drive impact tools and need every SAE socket organized and at hand. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a serious upgrade.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Black Top\/White Ltr","offer_id":47700070334700,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Ltr","offer_id":47700070367468,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/Black Ltr","offer_id":47700070400236,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Ltr","offer_id":47700070433004,"sku":"MIL-003-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7899376368_rcm8.jpg?v=1780504304"},{"product_id":"milwaukee-packout-shockwave-impact-socket-organizer-3d-printed-3-8-metric-complete-no-skip-standard-deep-socket-tray-gift-for-him","title":"Milwaukee Packout Shockwave Impact Socket Organizer 3D Printed 3\/8 Metric Complete No-Skip Standard Deep Socket Tray Gift for Him","description":"\u003cp\u003ePrecision-fit tray for the complete Milwaukee SHOCKWAVE 3\/8\" metric impact socket lineup — 6mm through 24mm, standard and deep, all 38 sockets — drops straight into your Milwaukee Packout.\u003c\/p\u003e\n\n\u003cp\u003eFROM: BOB (HEAD MAKER)\u003cbr\u003e\nThis is an organizer requested by a customer to contain all of the available 3\/8\" drive Milwaukee Impact metric sockets available in both deep and shallow. It takes several different sets or individual socket purchases to build this full set.\u003c\/p\u003e \n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nThis listing description was written with AI assistance. All product specifications, compatibility details, and fit information have been verified by MountaineerMaker.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 38 Milwaukee SHOCKWAVE 3\/8\" metric impact sockets — 19 standard and 19 deep, 6mm through 24mm, no sizes skipped\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8436 (Compact Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed for the complete Milwaukee SHOCKWAVE 3\/8\" Drive metric impact socket lineup — every available size from 6mm through 24mm in both standard and deep, no sizes skipped.\u003c\/p\u003e\n\n\u003cp\u003eMetric Standard (19 sockets, 6mm–24mm):\u003cbr\u003e\n6mm (49-66-6130) · 7mm (49-66-6131) · 8mm (49-66-6132) · 9mm (49-66-6133) · 10mm (49-66-6134) · 11mm (49-66-6135) · 12mm (49-66-6136) · 13mm (49-66-6137) · 14mm (49-66-6138) · 15mm (49-66-6139) · 16mm (49-66-6140) · 17mm (49-66-6141) · 18mm (49-66-6142) · 19mm (49-66-6143) · 20mm (49-66-6737) · 21mm (49-66-6144) · 22mm (49-66-6145) · 23mm (49-66-6146) · 24mm (49-66-6147)\u003c\/p\u003e\n\n\u003cp\u003eMetric Deep (19 sockets, 6mm–24mm):\u003cbr\u003e\n6mm (49-66-6148) · 7mm (49-66-6149) · 8mm (49-66-6150) · 9mm (49-66-6151) · 10mm (49-66-6152) · 11mm (49-66-6153) · 12mm (49-66-6154) · 13mm (49-66-6155) · 14mm (49-66-6156) · 15mm (49-66-6157) · 16mm (49-66-6158) · 17mm (49-66-6159) · 18mm (49-66-6160) · 19mm (49-66-6161) · 20mm (49-66-6738) · 21mm (49-66-6162) · 22mm (49-66-6163) · 23mm (49-66-6164) · 24mm (49-66-6165)\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 3\/8\" impact sockets. Other brands may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for the matching Milwaukee SHOCKWAVE 3\/8\" SAE companion tray and the full SAE + Metric bundle.\u003cbr\u003e\n[PLACEHOLDER — SAE tray URL]\u003c\/p\u003e\n\n\u003cp\u003eDon't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Complete no-skip metric lineup — every size Milwaukee makes in 3\/8\" metric impact, standard and deep, in one tray\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Large socket openings are by design — not a defect: The largest sockets require an opening that goes all the way through the tray floor. This is intentional — the socket diameter exactly matches the pocket width, so it seats fully and is retained securely.\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Low-Profile Organizer (48-22-8431), Compact Low-Profile Organizer (48-22-8436), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for the matching SAE companion tray and the full SAE + Metric bundle.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who want every Milwaukee 3\/8\" metric impact socket organized and at hand. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Top\/Black Letter","offer_id":47700070629612,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Letter","offer_id":47700070662380,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Letter","offer_id":47700070695148,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/White Lter","offer_id":47700070727916,"sku":"MIL-004-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7899835908_1772.jpg?v=1780504306"},{"product_id":"milwaukee-packout-socket-organizer-3d-printed-1-2-shockwave-metric-deep-impact-socket-tray-49-66-7015-29-sockets-8mm-to-36mm-gift-for-him","title":"Milwaukee Packout Socket Organizer, 3D Printed, 1\/2 Shockwave Metric Deep Impact Socket Tray 49-66-7015, 29 Sockets 8mm to 36mm,Gift for Him","description":"\u003cp\u003ePrecision-fit tray for the complete 49-66-7015 Milwaukee SHOCKWAVE 1\/2\" metric deep impact socket lineup — 8mm through 36mm, all 29 sockets — drops straight into your Milwaukee Packout deep organizer.\u003c\/p\u003e\n\n\u003cp\u003eFROM BOB (Head Maker):\u003cbr\u003e\nI had customers ask about Milwaukee 1\/2\" impact socket trays. When I take on a new tool series, I like to offer a solution for the full range of set options the vendor sells. In this case, I wanted a tray to cover every 1\/2\" drive Metric socket that Milwaukee makes. We are doing the same on the SAE side as well.\u003c\/p\u003e \n\n\u003cp\u003eFROM AI:\u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 29 Milwaukee SHOCKWAVE 1\/2\" deep metric impact sockets — 8mm through 36mm, no sizes skipped\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — DEEP ORGANIZERS ONLY\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ Standard tool chest — use standalone in any drawer, or add the optional dovetail-locking grid frame (see shop)\u003c\/p\u003e\n\n\u003cp\u003e✘ Does NOT fit the low-profile organizers (48-22-8431, 48-22-8436) — this tray is designed for the deeper cavity of the 48-22-8430 and 48-22-8435 only.\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed for the complete Milwaukee SHOCKWAVE 1\/2\" Drive Metric Deep 6-Point impact socket lineup — all 29 sockets, 8mm through 36mm.\u003c\/p\u003e\n\n\u003cp\u003eNeed the shallow metric companion tray instead?\u003cbr\u003e\nhttps:\/\/mountaineermaker.etsy.com\/listing\/4513912557\u003c\/p\u003e\n\n\u003cp\u003eComplete set (fills all 29 pockets in one purchase):\u003cbr\u003e\n49-66-7015 — 29pc SHOCKWAVE 1\/2\" Drive Metric Deep 6-Point Socket Set (8mm–36mm)\u003c\/p\u003e\n\n\u003cp\u003eIndividual socket part numbers:\u003cbr\u003e\n8mm — 49-66-6269\u003cbr\u003e\n9mm — 49-66-6270\u003cbr\u003e\n10mm — 49-66-6271\u003cbr\u003e\n11mm — 49-66-6272\u003cbr\u003e\n12mm — 49-66-6273\u003cbr\u003e\n13mm — 49-66-6274\u003cbr\u003e\n14mm — 49-66-6275\u003cbr\u003e\n15mm — 49-66-6276\u003cbr\u003e\n16mm — 49-66-6277\u003cbr\u003e\n17mm — 49-66-6278\u003cbr\u003e\n18mm — 49-66-6279\u003cbr\u003e\n19mm — 49-66-6280\u003cbr\u003e\n20mm — 49-66-6281\u003cbr\u003e\n21mm — 49-66-6282\u003cbr\u003e\n22mm — 49-66-6283\u003cbr\u003e\n23mm — 49-66-6284\u003cbr\u003e\n24mm — 49-66-6285\u003cbr\u003e\n25mm — 49-66-6286\u003cbr\u003e\n26mm — 49-66-6287\u003cbr\u003e\n27mm — 49-66-6288\u003cbr\u003e\n28mm — 49-66-6289\u003cbr\u003e\n29mm — 49-66-6290\u003cbr\u003e\n30mm — 49-66-6291\u003cbr\u003e\n31mm — 49-66-6292\u003cbr\u003e\n32mm — 49-66-6293\u003cbr\u003e\n33mm — 49-66-6294\u003cbr\u003e\n34mm — 49-66-6295\u003cbr\u003e\n35mm — 49-66-6296\u003cbr\u003e\n36mm — 49-66-6297\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" impact sockets. Other brands use different wall thicknesses and lengths and may not fit correctly. Message me before ordering if unsure.\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for the matching Milwaukee SHOCKWAVE 1\/2\" SAE deep companion tray.\u003cbr\u003e\nhttps:\/\/mountaineermaker.etsy.com\/listing\/4486597156\u003c\/p\u003e\n\n\u003cp\u003eDon't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\nMaterial: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading. Built for the shop, the truck, and the jobsite.\u003cbr\u003e\nTray colors: Black or Red\u003cbr\u003e\nLabel colors: Red, Black, or White\u003cbr\u003e\nSelect your color combination from the purchase options.\u003cbr\u003e\nNote on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Complete no-skip metric lineup — every Milwaukee 1\/2\" deep metric impact socket size from 8mm through 36mm, 29 sockets, in one tray\u003cbr\u003e\n✔ Built for the deep Packout organizers — designed specifically for the 48-22-8430 and 48-22-8435, not the low-profile models\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they work across Milwaukee Packout organizers and drawer units with the right adapter. Check my shop for matching SAE companion trays, storage base spacer trays, and drawer adapter frames.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who run 1\/2\" drive impact tools and need every metric socket organized and at hand. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a serious upgrade.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eNote on open-bottom pockets: Some larger sockets require a pocket that goes through the tray floor — the socket diameter exactly matches the pocket width. This is intentional precision engineering, not a defect. The socket is fully retained from the sides.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Black Top\/White Ltr","offer_id":47700070760684,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Top\/Red Ltr","offer_id":47700070793452,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/Black Ltr","offer_id":47700070826220,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Red Top\/White Ltr","offer_id":47700070858988,"sku":"MIL-005-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7898887544_m9ky.jpg?v=1780504308"},{"product_id":"milwaukee-packout-shockwave-49-66-7009-impact-socket-organizer-43-piece-3-8-packout-tray-sae-metric","title":"Milwaukee Packout Shockwave 49-66-7009 Impact Socket Organizer – 43-Piece 3\/8\" Packout Tray, SAE \u0026 Metric","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed socket tray organizes your complete Milwaukee SHOCKWAVE 49-66-7009 SAE and metric impact set — standard, deep, and accessories all in one place and drops straight into your Milwaukee Packout.\u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray only. Sockets, tools, storage tray, and Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 1 PETG socket tray (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Holds all 40 sockets from the Milwaukee SHOCKWAVE 49-66-7009 SAE and metric impact set — standard and deep\u003cbr\u003e\n- Dedicated pocket area for the included 3\" extension, universal joint, and 3\/8\" adapter\u003cbr\u003e\n- Size labels embossed directly into every pocket\u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — NO MODIFICATIONS NEEDED\u003cbr\u003e\n✔ 48-22-8436 (Low-Profile Compact Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8431 (Low-Profile Organizer) — tray drops straight in, lid closes fully\u003cbr\u003e\n✔ 48-22-8430 (Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer, deep) — add storage base tray underneath, or nest with a second socket tray\u003cbr\u003e\n✔ Standard tool chest — use the tray standalone in any drawer, or add the optional dovetail-locking grid frame to lock multiple trays into a perfectly aligned system (see shop)\u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\nThis tray is designed specifically for the Milwaukee SHOCKWAVE Impact Duty 3\/8 in. Drive SAE \u0026amp; Metric Deep 6-Point Socket Set, 43-Piece (Item 49-66-7009).\u003cbr\u003e\n \u003cbr\u003e\n40 sockets — standard and deep in both SAE and metric:\u003cbr\u003e\nSAE standard: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nSAE deep: 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\"\u003cbr\u003e\nMetric standard: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nMetric deep: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm\u003cbr\u003e\nAccessories: 3\" extension, universal joint, 3\/8\" adapter\u003cbr\u003e\n \u003cbr\u003e\nIndividual SAE socket part numbers:\u003cbr\u003e\nStandard:\u003cbr\u003e\n- 5\/16\" — 49-66-6102\u003cbr\u003e\n- 3\/8\" — 49-66-6104\u003cbr\u003e\n- 7\/16\" — 49-66-6105\u003cbr\u003e\n- 1\/2\" — 49-66-6106\u003cbr\u003e\n- 9\/16\" — 49-66-6107\u003cbr\u003e\n- 5\/8\" — 49-66-6108\u003cbr\u003e\n- 11\/16\" — 49-66-6109\u003cbr\u003e\n- 3\/4\" — 49-66-6110\u003cbr\u003e\n \u003cbr\u003e\nDeep:\u003cbr\u003e\n- 5\/16\" — 49-66-6117\u003cbr\u003e\n- 3\/8\" — 49-66-6119\u003cbr\u003e\n- 7\/16\" — 49-66-6120\u003cbr\u003e\n- 1\/2\" — 49-66-6121\u003cbr\u003e\n- 9\/16\" — 49-66-6122\u003cbr\u003e\n- 5\/8\" — 49-66-6123\u003cbr\u003e\n- 11\/16\" — 49-66-6124\u003cbr\u003e\n- 3\/4\" — 49-66-6125\u003cbr\u003e\n \u003cbr\u003e\nIndividual metric socket part numbers:\u003cbr\u003e\nStandard:\u003cbr\u003e\n- 8mm — 49-66-6132\u003cbr\u003e\n- 9mm — 49-66-6133\u003cbr\u003e\n- 10mm — 49-66-6134\u003cbr\u003e\n- 11mm — 49-66-6135\u003cbr\u003e\n- 12mm — 49-66-6136\u003cbr\u003e\n- 13mm — 49-66-6137\u003cbr\u003e\n- 14mm — 49-66-6138\u003cbr\u003e\n- 15mm — 49-66-6139\u003cbr\u003e\n- 16mm — 49-66-6140\u003cbr\u003e\n- 17mm — 49-66-6141\u003cbr\u003e\n- 18mm — 49-66-6142\u003cbr\u003e\n- 19mm — 49-66-6143\u003cbr\u003e\n \u003cbr\u003e\nDeep:\u003cbr\u003e\n- 8mm — 49-66-6150\u003cbr\u003e\n- 9mm — 49-66-6151\u003cbr\u003e\n- 10mm — 49-66-6152\u003cbr\u003e\n- 11mm — 49-66-6153\u003cbr\u003e\n- 12mm — 49-66-6154\u003cbr\u003e\n- 13mm — 49-66-6155\u003cbr\u003e\n- 14mm — 49-66-6156\u003cbr\u003e\n- 15mm — 49-66-6157\u003cbr\u003e\n- 16mm — 49-66-6158\u003cbr\u003e\n- 17mm — 49-66-6159\u003cbr\u003e\n- 18mm — 49-66-6160\u003cbr\u003e\n- 19mm — 49-66-6161\u003cbr\u003e\n \u003cbr\u003e\n⚠️ NOT UNIVERSAL — This tray is dimensioned specifically for Milwaukee SHOCKWAVE 49-66-7009 impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.\u003cbr\u003e\n \u003cbr\u003e\nCheck my shop for trays covering other combinations of Milwaukee SHOCKWAVE 3\/8\" and 1\/2\" drive impact sockets. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading. Built for the shop, the truck, and the jobsite.\u003cbr\u003e\n- Tray colors: Black or Red\u003cbr\u003e\n- Label colors: Red, Black, or White\u003cbr\u003e\n- Select your color combination from the purchase options.\u003cbr\u003e\n- Every tray is printed and test-fit before shipping.\u003cbr\u003e\n- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Standardized footprint — fits all four Milwaukee Packout organizers with no modification\u003cbr\u003e\n✔ Tapered base nests trays in deep organizers — stack two socket trays, or add a storage base underneath\u003cbr\u003e\n✔ Lid closes fully on all compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest grid system — optional dovetail-locking grid frames keep every tray perfectly aligned in any standard drawer (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold impact sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Dedicated accessory pockets — the extension, universal joint, and adapter have a home too\u003cbr\u003e\n✔ Size labels embossed directly into the tray — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — tray drops straight in\u003cbr\u003e\n✔ Rigid structure — won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n \u003cbr\u003e\nTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any Milwaukee Packout Compact Low-Profile (48-22-8436), Low-Profile (48-22-8431), Organizer (48-22-8430), or Compact Organizer (48-22-8435) — no measuring, no adapters. The tapered base lets you nest trays in deeper organizers or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching SAE and metric companion trays that fit together into a complete organized system.\u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.\u003cbr\u003e\n \u003cbr\u003e\nPLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray","offer_id":47700070924524,"sku":"MIL-006-PHY","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray","offer_id":47700070957292,"sku":"MIL-006-PHY","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7930874035_epuh.jpg?v=1780504309"},{"product_id":"milwaukee-impact-socket-organizer-for-packout-1-2-drive-shockwave-metric-deep-shallow-no-skip-complete-set","title":"Milwaukee Impact Socket Organizer for Packout, 1\/2\" Drive Shockwave Metric Deep \u0026 Shallow No-Skip Complete Set","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed two-tray stacking set holds your complete Milwaukee SHOCKWAVE 1\/2\" metric impact socket collection — every size from 10mm to 27mm, in both deep and standard depth, organized in a single deep Packout organizer.\u003c\/p\u003e\n\n\u003cp\u003eTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray set only. Sockets, tools, and Milwaukee Packout case are not included.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 2 PETG socket trays (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Tray 1 (Base — Deep Sockets, 10mm–22mm): Holds 13 Milwaukee SHOCKWAVE 1\/2\" metric deep impact sockets. Sits in the base of the Packout organizer.\u003cbr\u003e\n- Tray 2 (Nested — Mixed, 10mm–27mm): Nests directly on top of Tray 1. Holds all 18 Milwaukee SHOCKWAVE 1\/2\" metric standard (shallow) impact sockets plus the 5 large deep impact sockets (23mm–27mm) that won't fit in Tray 1.\u003cbr\u003e\n- 36 sockets total across both trays\u003cbr\u003e\n- Elastic lifting handles on both trays — makes it easy to pull the loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n- Size labels embossed directly into every pocket on both trays\u003c\/p\u003e\n\n\u003cp\u003eFITS YOUR PACKOUT — IMPORTANT NOTE ON COMPATIBILITY\u003cbr\u003e\nThis two-tray stacking set fits Milwaukee Packout Organizers — not the Low-Profile variants. The stacked height of both trays requires the full interior depth of the standard-depth organizer. Low-profile Packout lids will not close over the stacked set.\u003c\/p\u003e\n\n\u003cp\u003e✔ 48-22-8430 (Organizer) — deep socket tray drops in, standard tray nests on top, lid closes fully\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — same depth as 8430, stacked trays fit, lid closes fully\u003cbr\u003e\n✗ 48-22-8431 (Low-Profile Organizer) — NOT compatible, insufficient interior depth for two-tray stack\u003cbr\u003e\n✗ 48-22-8436 (Compact Low-Profile Organizer) — NOT compatible, insufficient interior depth for two-tray stack\u003cbr\u003e\n✔ Standard tool chest — use the stacked tray set in any drawer with sufficient depth, or add the optional dovetail-locking grid frame to lock trays into a perfectly aligned system (see shop)\u003c\/p\u003e\n\n\u003cp\u003eSOCKET SET COMPATIBILITY\u003cbr\u003e\nMilwaukee SHOCKWAVE 1\/2\" Drive 6-Point Metric Impact Sockets — 10mm to 27mm (18 sizes, both depths)\u003c\/p\u003e\n\n\u003cp\u003eMilwaukee does not sell a single set covering this full range in both depths. This tray set is designed for the complete assembled collection, requiring a combination of sets and individual purchases. Sizes larger than 27mm are not accommodated.\u003c\/p\u003e\n\n\u003cp\u003eTRAY 1 — Base (Deep sockets, 10mm–22mm, 13 sockets):\u003cbr\u003e\n49-66-6271 — 10mm\u003cbr\u003e\n49-66-6272 — 11mm\u003cbr\u003e\n49-66-6273 — 12mm\u003cbr\u003e\n49-66-6274 — 13mm\u003cbr\u003e\n49-66-6275 — 14mm\u003cbr\u003e\n49-66-6276 — 15mm\u003cbr\u003e\n49-66-6277 — 16mm\u003cbr\u003e\n49-66-6278 — 17mm\u003cbr\u003e\n49-66-6279 — 18mm\u003cbr\u003e\n49-66-6280 — 19mm\u003cbr\u003e\n49-66-6281 — 20mm\u003cbr\u003e\n49-66-6282 — 21mm\u003cbr\u003e\n49-66-6283 — 22mm\u003c\/p\u003e\n\n\u003cp\u003eTRAY 2 — Nested (Mixed: standard 10mm–27mm + large deep 23mm–27mm, 23 sockets):\u003c\/p\u003e\n\n\u003cp\u003eStandard (shallow) sockets, 10mm–27mm (18 sockets):\u003cbr\u003e\n49-66-6242 — 10mm\u003cbr\u003e\n49-66-6243 — 11mm\u003cbr\u003e\n49-66-6244 — 12mm\u003cbr\u003e\n49-66-6245 — 13mm\u003cbr\u003e\n49-66-6246 — 14mm\u003cbr\u003e\n49-66-6247 — 15mm\u003cbr\u003e\n49-66-6248 — 16mm\u003cbr\u003e\n49-66-6249 — 17mm\u003cbr\u003e\n49-66-6250 — 18mm\u003cbr\u003e\n49-66-6251 — 19mm\u003cbr\u003e\n49-66-6252 — 20mm\u003cbr\u003e\n49-66-6253 — 21mm\u003cbr\u003e\n49-66-6254 — 22mm\u003cbr\u003e\n49-66-6255 — 23mm\u003cbr\u003e\n49-66-6256 — 24mm\u003cbr\u003e\n49-66-6257 — 25mm\u003cbr\u003e\n49-66-6258 — 26mm\u003cbr\u003e\n49-66-6259 — 27mm\u003c\/p\u003e\n\n\u003cp\u003eLarge deep sockets, 23mm–27mm (5 sockets):\u003cbr\u003e\n49-66-6284 — 23mm\u003cbr\u003e\n49-66-6285 — 24mm\u003cbr\u003e\n49-66-6286 — 25mm\u003cbr\u003e\n49-66-6287 — 26mm\u003cbr\u003e\n49-66-6288 — 27mm\u003c\/p\u003e\n\n\u003cp\u003e⚠️ NOT UNIVERSAL — This tray set is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" metric impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.\u003c\/p\u003e\n\n\u003cp\u003eMatching 1\/2\" SAE socket tray set: https:\/\/www.etsy.com\/listing\/4477866151\u003c\/p\u003e\n\n\u003cp\u003eCheck my shop for trays covering other Milwaukee 1\/2\" socket combinations. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS \u0026amp; COLORS\u003cbr\u003e\n- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\n- Tray colors: Black or Red\u003cbr\u003e\n- Label colors: Red, Black, or White\u003cbr\u003e\n- Select your color combination from the purchase options.\u003cbr\u003e\n- Every tray is printed and test-fit before shipping.\u003cbr\u003e\n- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003c\/p\u003e\n\n\u003cp\u003eWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Two-tray stacking system — deep socket base tray sits on the bottom, mixed tray nests directly on top, both fit inside a single Milwaukee Packout Organizer (48-22-8430 or 48-22-8435)\u003cbr\u003e\n✔ Complete 1\/2\" metric coverage — 36 sockets total: 13 deep (10mm–22mm), 18 standard (10mm–27mm), and 5 large deep (23mm–27mm)\u003cbr\u003e\n✔ Elastic lifting handles — both trays include handles so you can pull the fully loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n✔ Lid closes fully on both compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest ready — use the stacked set in any drawer, or add the optional dovetail-locking grid frame for a perfectly aligned system (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — trays drop straight in and nest without fasteners\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003c\/p\u003e\n\n\u003cp\u003eTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray set is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any compatible Milwaukee Packout organizer — no measuring, no adapters. The tapered base lets you nest trays or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for the matching 1\/2\" SAE companion tray set and other drive-size options that fit together into a complete organized system.\u003c\/p\u003e\n\n\u003cp\u003ePERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003c\/p\u003e\n\n\u003cp\u003eCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.\u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003c\/p\u003e\n\n\u003cp\u003eQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray\/Black Text","offer_id":47700073054444,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/White Text","offer_id":47700073087212,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/Red Text","offer_id":47700073119980,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/White Txt","offer_id":47700073152748,"sku":"MIL-007-PHY","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7854401190_36zs.jpg?v=1780504337"},{"product_id":"milwaukee-impact-socket-organizer-for-packout-1-2-drive-shockwave-sae-deep-shallow-no-skip-complete-set","title":"Milwaukee Impact Socket Organizer for Packout, 1\/2\" Drive Shockwave SAE Deep \u0026 Shallow No-Skip Complete Set","description":"\u003cp\u003eStop hunting for the right socket. This 3D printed two-tray stacking set holds your complete Milwaukee SHOCKWAVE 1\/2\" SAE impact socket collection — every size from 3\/8\" to 1-1\/2\", in both deep and standard depth, organized in a single deep Packout organizer.\u003cbr\u003e\n \u003cbr\u003e\nTRAY ONLY — IMPORTANT\u003cbr\u003e\nThis listing is for the 3D printed tray set only. Sockets, tools, and the Milwaukee Packout case are not included.\u003cbr\u003e\n \u003cbr\u003e\nWHAT YOU'LL RECEIVE\u003cbr\u003e\n- 2 PETG socket trays (tough, heat-resistant material) — printed, inspected, and test-fit before shipping\u003cbr\u003e\n- Tray 1 (Base — Deep Sockets, 3\/8\"–1-3\/16\"): Holds 14 Milwaukee SHOCKWAVE 1\/2\" SAE deep impact sockets. Sits in the base of the Packout organizer.\u003cbr\u003e\n- Tray 2 (Nested — Mixed, 3\/8\"–1-1\/2\"): Nests directly on top of Tray 1. Holds all 19 Milwaukee SHOCKWAVE 1\/2\" SAE standard (shallow) impact sockets plus the 5 large deep impact sockets (1-1\/4\"–1-1\/2\") that won't fit in Tray 1.\u003cbr\u003e\n- 38 sockets total across both trays\u003cbr\u003e\n- Elastic lifting handles on both trays — make it easy to pull the loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n- Size labels embossed directly into every pocket on both trays\u003cbr\u003e\n- Note: 1-9\/16\" is not accommodated in either tray (see compatibility section)\u003cbr\u003e\n \u003cbr\u003e\nFITS YOUR PACKOUT — IMPORTANT NOTE ON COMPATIBILITY\u003cbr\u003e\nThis two-tray stacking set is designed for the deep Milwaukee Packout organizers only. The stacked height of both trays requires the full interior depth of the low-profile organizer — it will not fit the compact or standard organizers.\u003cbr\u003e\n \u003cbr\u003e\n✗  48-22-8431 (Low-Profile Organizer) — NOT compatible, insufficient interior depth\u003cbr\u003e\n✔ 48-22-8430 (Organizer) — deep socket tray drops in, standard tray nests on top, lid closes fully\u003cbr\u003e\n✗ 48-22-8436 (Compact Low-Profile Organizer) — NOT compatible, insufficient interior depth\u003cbr\u003e\n✔ 48-22-8435 (Compact Organizer) — same stacking configuration, lid closes fully\u003cbr\u003e\n✔ Standard tool chest — use the stacked tray set in any drawer with sufficient depth, or add the optional dovetail-locking grid frame to lock trays into a perfectly aligned system (see shop)\u003cbr\u003e\n \u003cbr\u003e\nSOCKET SET COMPATIBILITY\u003cbr\u003e\nMilwaukee SHOCKWAVE 1\/2\" Drive 6-Point SAE Impact Sockets — 3\/8\" to 1-1\/2\" (19 sizes, both depths)\u003cbr\u003e\n \u003cbr\u003e\nMilwaukee does not sell a single set covering this full range in both depths. This tray set is designed for the complete assembled collection, requiring a combination of sets and individual purchases.\u003cbr\u003e\n \u003cbr\u003e\nTRAY 1 — Base (Deep sockets, 3\/8\"–1-3\/16\", 14 sockets):\u003cbr\u003e\n49-66-6220 — 3\/8\"\u003cbr\u003e\n49-66-6221 — 7\/16\"\u003cbr\u003e\n49-66-6222 — 1\/2\"\u003cbr\u003e\n49-66-6223 — 9\/16\"\u003cbr\u003e\n49-66-6224 — 5\/8\"\u003cbr\u003e\n49-66-6225 — 11\/16\"\u003cbr\u003e\n49-66-6226 — 3\/4\"\u003cbr\u003e\n49-66-6227 — 13\/16\"\u003cbr\u003e\n49-66-6228 — 7\/8\"\u003cbr\u003e\n49-66-6229 — 15\/16\"\u003cbr\u003e\n49-66-6230 — 1\"\u003cbr\u003e\n49-66-6231 — 1-1\/16\"\u003cbr\u003e\n49-66-6232 — 1-1\/8\"\u003cbr\u003e\n49-66-6233 — 1-3\/16\"\u003cbr\u003e\n \u003cbr\u003e\nTRAY 2 — Nested (Mixed: standard 3\/8\"–1-1\/2\" + large deep 1-1\/4\"–1-1\/2\", 24 sockets):\u003cbr\u003e\n \u003cbr\u003e\nStandard (shallow) sockets, 3\/8\"–1-1\/2\" (19 sockets):\u003cbr\u003e\n49-66-6200 — 3\/8\"\u003cbr\u003e\n49-66-6201 — 7\/16\"\u003cbr\u003e\n49-66-6202 — 1\/2\"\u003cbr\u003e\n49-66-6203 — 9\/16\"\u003cbr\u003e\n49-66-6204 — 5\/8\"\u003cbr\u003e\n49-66-6205 — 11\/16\"\u003cbr\u003e\n49-66-6206 — 3\/4\"\u003cbr\u003e\n49-66-6207 — 13\/16\"\u003cbr\u003e\n49-66-6208 — 7\/8\"\u003cbr\u003e\n49-66-6209 — 15\/16\"\u003cbr\u003e\n49-66-6210 — 1\"\u003cbr\u003e\n49-66-6211 — 1-1\/16\"\u003cbr\u003e\n49-66-6212 — 1-1\/8\"\u003cbr\u003e\n49-66-6213 — 1-3\/16\"\u003cbr\u003e\n49-66-6214 — 1-1\/4\"\u003cbr\u003e\n49-66-6215 — 1-5\/16\"\u003cbr\u003e\n49-66-6216 — 1-3\/8\"\u003cbr\u003e\n49-66-6217 — 1-7\/16\"\u003cbr\u003e\n49-66-6218 — 1-1\/2\"\u003cbr\u003e\n \u003cbr\u003e\nLarge deep sockets, 1-1\/4\"–1-1\/2\" (5 sockets):\u003cbr\u003e\n49-66-6234 — 1-1\/4\"\u003cbr\u003e\n49-66-6235 — 1-5\/16\"\u003cbr\u003e\n49-66-6236 — 1-3\/8\"\u003cbr\u003e\n49-66-6237 — 1-7\/16\"\u003cbr\u003e\n49-66-6238 — 1-1\/2\"\u003cbr\u003e\n \u003cbr\u003e\n⚠️ 1-9\/16\" NOT INCLUDED — Milwaukee makes a 1-9\/16\" socket in both deep and standard depth, but this tray set does not accommodate that size. If you need the 1-9\/16\" included, message me.\u003cbr\u003e\n \u003cbr\u003e\n⚠️ NOT UNIVERSAL — This tray set is dimensioned specifically for Milwaukee SHOCKWAVE 1\/2\" SAE impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.\u003c\/p\u003e\n\n\u003cp\u003eMetric Version of the dual tray impact set:  https:\/\/www.etsy.com\/listing\/4479432954\u003cbr\u003e\n \u003cbr\u003e\nCheck my shop for trays covering other Milwaukee 1\/2\" socket combinations. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.\u003cbr\u003e\n \u003cbr\u003e\nMATERIALS \u0026amp; COLORS\u003cbr\u003e\n- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.\u003cbr\u003e\n- Tray colors: Black or Red\u003cbr\u003e\n- Label colors: Red, Black, or White\u003cbr\u003e\n- Select your color combination from the purchase options.\u003cbr\u003e\n- Every tray is printed and test-fit before shipping.\u003cbr\u003e\n- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.\u003cbr\u003e\n \u003cbr\u003e\nWHAT MAKES THIS DIFFERENT\u003cbr\u003e\n✔ Two-tray stacking system — deep socket base tray sits on the bottom, mixed tray nests directly on top, both fit inside a single deep Packout Low-Profile Organizer\u003cbr\u003e\n✔ Complete 1\/2\" SAE coverage — 38 sockets total: 14 deep (3\/8\"–1-3\/16\"), 19 standard (3\/8\"–1-1\/2\"), and 5 large deep (1-1\/4\"–1-1\/2\")\u003cbr\u003e\n✔ Elastic lifting handles — both trays include handles so you can pull the fully loaded trays cleanly out of the deep Packout organizer\u003cbr\u003e\n✔ Lid closes fully on both compatible Packout models — no bulge, no interference\u003cbr\u003e\n✔ Tool chest ready — use the stacked set in any drawer, or add the optional dovetail-locking grid frame for a perfectly aligned system (like Gridfinity, but purpose-built for a real workshop)\u003cbr\u003e\n✔ Sockets stay put during transport — pockets dimensioned to hold sockets securely during vertical carry, vehicle trips, and accidental drops\u003cbr\u003e\n✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out\u003cbr\u003e\n✔ No tools, adhesive, or hardware needed — trays drop straight in and nest without fasteners\u003cbr\u003e\n✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts\u003cbr\u003e\n✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships\u003cbr\u003e\n \u003cbr\u003e\nTHE MOUNTAINEERMAKER SYSTEM\u003cbr\u003e\nThis tray set is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any compatible Milwaukee Packout organizer — no measuring, no adapters. The tapered base lets you nest trays or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for matching metric and multi-drive companion trays that fit together into a complete, organized system.\u003cbr\u003e\n \u003cbr\u003e\nPERFECT FOR...\u003cbr\u003e\nPerfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.\u003cbr\u003e\n \u003cbr\u003e\nCUSTOM ORDERS\u003cbr\u003e\nNeed a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets, and I'm happy to help get your collection organized.\u003cbr\u003e\n \u003cbr\u003e\nPLEASE NOTE\u003cbr\u003e\nCustom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.\u003cbr\u003e\n \u003cbr\u003e\nQuestions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Red Tray\/Black Text","offer_id":47700073185516,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Red Tray\/White Text","offer_id":47700073218284,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/Red Text","offer_id":47700073251052,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Black Tray\/White Txt","offer_id":47700073283820,"sku":"MIL-008-PHY","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/il_fullxfull.7901744149_gy53.jpg?v=1780504339"}],"url":"https:\/\/mountaineermaker.com\/collections\/milwaukee.oembed","provider":"Mountaineer Maker","version":"1.0","type":"link"}