{"product_id":"milwaukee-packout-1-2-drive-deep-impact-socket-organizer-stl-3mf-file-for-gearwrench-89072-6-point-metric-8mm-36mm-29-pc","title":"Milwaukee Packout 1\/2\" Drive Deep Impact Socket Organizer STL\/3MF File for GearWrench 89072 6-Point Metric, 8mm–36mm (29-Pc)","description":"\u003cp\u003e\u003cstrong\u003ePrint the organizer yourself.\u003c\/strong\u003e This is the 3D print file for our GearWrench metric deep impact socket organizer insert: the 29 metric deep sockets of the GearWrench 89072 1\/2\" drive impact set, 8mm to 36mm, 6-point, each standing in its own pocket, in size order with the largest at the front, plus a support lid with a label at every hole.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL FILE ONLY\u003cbr\u003e\nYou receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- \u003cstrong\u003eOne 3MF file\u003c\/strong\u003e: the support lid with its body and labels already set up as one two-color object\u003cbr\u003e\n- \u003cstrong\u003eThree STL files\u003c\/strong\u003e: the organizer base, the support lid, and the lid's labels already in place for a second color\u003cbr\u003e\n- \u003cstrong\u003eA Start-here card\u003c\/strong\u003e linking to our \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm\u003cbr\u003e\n- \u003cstrong\u003eThe license\u003c\/strong\u003e: the Mountaineer Maker Digital Product License (v1.0) as a PDF\u003c\/p\u003e\n\n\u003cp\u003eSIZES COVERED (GearWrench 89072, metric deep)\u003cbr\u003e\n8mm · 9mm · 10mm · 11mm · 12mm · 13mm · 14mm · 15mm · 16mm · 17mm · 18mm · 19mm · 20mm · 21mm · 22mm · 23mm · 24mm · 25mm · 26mm · 27mm · 28mm · 29mm · 30mm · 31mm · 32mm · 33mm · 34mm · 35mm · 36mm\u003c\/p\u003e\n\n\u003cp\u003eFITS\u003cbr\u003e\n✔ Milwaukee Packout deep organizers 48-22-8430 and 48-22-8435: drops straight in, no spacer, and the lid holds the sockets in place\u003cbr\u003e\n✔ Standard tool chest drawers: drops straight in\u003cbr\u003e\nThe organizer nests on our other organizers and drawer adapters.\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL: pockets are cut to GearWrench's 89072 1\/2\" metric deep impact sockets, from caliper measurements of the actual set. Standard-length sockets, SAE sockets, or sockets from another set or brand may not seat correctly. Message us before buying if you're unsure.\u003c\/p\u003e\n\n\u003cp\u003ePRINTER REQUIREMENTS\u003cbr\u003e\n- Two parts, each printed in one piece: the base (293 × 193 mm) and the support lid. Your bed must be at least about 300 × 200 mm. They don't fit 256 × 256 mm beds in one piece.\u003cbr\u003e\n- \u003cstrong\u003eSmaller bed? Your slicer can cut the organizer to fit.\u003c\/strong\u003e See the step-by-step \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e for Creality Print, Bambu Studio and Orca Slicer.\u003cbr\u003e\n- No supports needed: print each part as it loads, flat side down\u003cbr\u003e\n- Designed and tested on a Creality K2 Plus; we print ours in PETG\u003c\/p\u003e\n\n\u003cp\u003eTWO-COLOR LABELS\u003cbr\u003e\n- The base's size labels are part of the base, in one color. The support lid carries the two-color labels.\u003cbr\u003e\n- \u003cstrong\u003eEasiest:\u003c\/strong\u003e open the 3MF. Lid body and labels are already one object on two filaments; pick your two colors.\u003cbr\u003e\n- With the STLs: import the support lid and its labels file together and load them as \u003cstrong\u003eone object with multiple parts\u003c\/strong\u003e, without re-arranging, so every label stays in its place. Give the labels part your second filament.\u003cbr\u003e\n- One color only? Leave both parts on the same filament.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use under the \u003ca href=\"\/pages\/digital-license\"\u003eMountaineer Maker Digital Product License (v1.0)\u003c\/a\u003e. You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.\u003c\/p\u003e\n\n\u003cp\u003ePrefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.\u003c\/p\u003e\n","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":67983138357484,"sku":"GRW-010-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/grw-010-dig-01-metric-deep-organizer-render.jpg?v=1793202867","url":"https:\/\/mountaineermaker.com\/products\/milwaukee-packout-1-2-drive-deep-impact-socket-organizer-stl-3mf-file-for-gearwrench-89072-6-point-metric-8mm-36mm-29-pc","provider":"Mountaineer Maker","version":"1.0","type":"link"}