{"product_id":"milwaukee-packout-1-4-drive-modular-impact-socket-organizer-stl-file-for-milwaukee-shockwave-49-66-7000-7001-7002-7003-6-point-sae-metric-shallow-deep-48-pc","title":"Milwaukee Packout 1\/4\" Drive Modular Impact Socket Organizer STL File for Milwaukee Shockwave 49-66-7000, 7001, 7002 \u0026 7003 6-Point SAE \u0026 Metric, Shallow \u0026 Deep (48-Pc)","description":"\u003cp\u003e\u003cstrong\u003ePrint the organizer yourself.\u003c\/strong\u003e This is the 3D print file for our modular Milwaukee Packout organizer for the Milwaukee Shockwave 1\/4\" drive impact sets 49-66-7000, 49-66-7001, 49-66-7002 and 49-66-7003: 6-point SAE and metric, shallow and deep, 48 sockets, every size labeled. An outer frame holds three sections that lift out (metric, SAE, and an open section for extensions or a ratchet), so you can take just the one you need to the bench.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL FILE ONLY\u003cbr\u003e\nYou receive a ZIP download right after purchase. Sockets, tools, organizer and toolbox are not included, and nothing is shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- \u003cstrong\u003eOne STL file per printed part\u003c\/strong\u003e, four parts in all: the outer frame, the metric section, the SAE section and the open section\u003cbr\u003e\n- \u003cstrong\u003eTwo 3MF files\u003c\/strong\u003e, one for the metric section and one for the SAE section, with the raised size labels already set up as a second colour\u003cbr\u003e\n- \u003cstrong\u003eTwo STL files per labeled section\u003c\/strong\u003e (body and labels), if your slicer works better with STLs\u003cbr\u003e\n- \u003cstrong\u003eA Start-here card\u003c\/strong\u003e linking to our \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e: recommended settings, plus how to split the frame with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm\u003cbr\u003e\n- \u003cstrong\u003eThe license\u003c\/strong\u003e: the Mountaineer Maker Digital Product License (v1.0) as a PDF\u003c\/p\u003e\n\n\u003cp\u003eWHAT GOES WHERE\u003cbr\u003e\n- \u003cstrong\u003eMetric section\u003c\/strong\u003e (28 sockets): 4mm–15mm including the 4.5mm and 5.5mm half sizes, shallow sockets upright and deep sockets lying flat in labeled troughs\u003cbr\u003e\n- \u003cstrong\u003eSAE section\u003c\/strong\u003e (20 sockets): 3\/16\"–9\/16\", shallow upright and deep lying flat\u003cbr\u003e\n- \u003cstrong\u003eOpen section\u003c\/strong\u003e: room for your 1\/4\" extensions or a ratchet, with a finger ledge on each side to lift it out\u003cbr\u003e\n- Retention arms on the larger deep sockets, sized from the actual sockets\u003cbr\u003e\nMilwaukee sells this range as the 49-66-7000 (SAE shallow), 49-66-7001 (SAE deep), 49-66-7002 (metric shallow) and 49-66-7003 (metric deep) sets.\u003c\/p\u003e\n\n\u003cp\u003eFITS\u003cbr\u003e\n✔ Milwaukee Packout low-profile organizers 48-22-8431 and 48-22-8436\u003cbr\u003e\n✔ Standard tool chest drawers (the organizer is 293 × 193 × 41 mm)\u003cbr\u003e\nWith an adapter or spacer (sold separately): the deep Packout organizers 48-22-8430 and 48-22-8435, and Packout drawers. The frame nests with our other organizers, above and below.\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL: pockets are cut to the exact dimensions of Milwaukee Shockwave 1\/4\" 6-point impact sockets. Sockets from a different brand or a different set may not fit.\u003c\/p\u003e\n\n\u003cp\u003ePRINTER REQUIREMENTS\u003cbr\u003e\n- The largest part is the frame, 293 × 193 mm and 41 mm tall; the three sections are 182 mm wide or less. Your bed must be at least about 300 × 200 mm for the frame. It does \u003cstrong\u003enot\u003c\/strong\u003e fit 256 × 256 mm beds in one piece.\u003cbr\u003e\n- \u003cstrong\u003eSmaller bed? Your slicer can cut it to fit.\u003c\/strong\u003e See the step-by-step \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e for Creality Print, Bambu Studio and Orca Slicer.\u003cbr\u003e\n- Print each part as it loads, flat side down. No supports needed\u003cbr\u003e\n- Designed and tested on a Creality K2 Plus; we print ours in PETG\u003c\/p\u003e\n\n\u003cp\u003eTWO-COLOUR LABELS (optional)\u003cbr\u003e\n- Open the 3MF files and load two filaments: the body prints in the first, the raised labels in the second. Prefer one colour? Print the STL files instead. The frame and the open section print in one colour.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use under the \u003ca href=\"\/pages\/digital-license\"\u003eMountaineer Maker Digital Product License (v1.0)\u003c\/a\u003e. You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.\u003c\/p\u003e\n\n\u003cp\u003ePrefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.\u003c\/p\u003e\n","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":68180527644908,"sku":"MIL-017-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/mil-017-dig-01-organizer-render.jpg?v=1794405575","url":"https:\/\/mountaineermaker.com\/products\/milwaukee-packout-1-4-drive-modular-impact-socket-organizer-stl-file-for-milwaukee-shockwave-49-66-7000-7001-7002-7003-6-point-sae-metric-shallow-deep-48-pc","provider":"Mountaineer Maker","version":"1.0","type":"link"}