{"product_id":"milwaukee-packout-3-8-drive-impact-socket-organizer-stl-3mf-file-tekton-sid91211-6-point-metric-shallow-deep-38-pc","title":"Milwaukee Packout 3\/8\" Drive Impact Socket Organizer STL\/3MF File for Tekton SID91211 6-Point Metric, Shallow \u0026 Deep, 6–24mm (38-Pc)","description":"\u003cp\u003e\u003cstrong\u003ePrint the organizer yourself.\u003c\/strong\u003e This is the 3D print file for our Tekton SID91211 organizer insert: the complete 3\/8\" drive metric impact set, shallow and deep, 6-point, 6–24mm, 38 pieces, every size labeled.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL FILE ONLY\u003cbr\u003e\nYou receive a ZIP download right after purchase. Sockets, organizer and Packout case are not included, and nothing is shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- \u003cstrong\u003e3MF file\u003c\/strong\u003e: the whole organizer with the size labels and logo already in place as separate parts, ready for a two-colour print\u003cbr\u003e\n- \u003cstrong\u003eTwo STL files\u003c\/strong\u003e (base and labels): the same design as two STLs, for slicers that prefer STL\u003cbr\u003e\n- \u003cstrong\u003eA Start-here card\u003c\/strong\u003e linking to our \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm\u003cbr\u003e\n- \u003cstrong\u003eThe license\u003c\/strong\u003e: the Mountaineer Maker Digital Product License (v1.0) as a PDF\u003c\/p\u003e\n\n\u003cp\u003eFITS\u003cbr\u003e\n✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) and 48-22-8436 (Compact Low-Profile Organizer)\u003cbr\u003e\nBuilt to the Tekton SID91211 set, with pocket sizes taken from calipers on the actual sockets. Shallow sockets stand upright; deep sockets lie flat in labeled troughs.\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL: pockets are cut to Tekton SID91211 3\/8\" metric impact sockets. Other brands and sets may not fit. Message us before buying if you're unsure.\u003c\/p\u003e\n\n\u003cp\u003ePRINTER REQUIREMENTS\u003cbr\u003e\n- One piece, 293 × 193 × 41 mm. Your bed must be at least about 300 × 200 mm. It does \u003cstrong\u003enot\u003c\/strong\u003e fit 256 × 256 mm beds in one piece.\u003cbr\u003e\n- \u003cstrong\u003eSmaller bed? Your slicer can cut it to fit.\u003c\/strong\u003e See the step-by-step \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e for Creality Print, Bambu Studio and Orca Slicer.\u003cbr\u003e\n- No supports needed: every overhang is designed at 45° or steeper\u003cbr\u003e\n- Designed and tested on a Creality K2 Plus; we print ours in PETG\u003c\/p\u003e\n\n\u003cp\u003eOPENING THE 3MF (two colours)\u003cbr\u003e\n- If your slicer asks to \u003cstrong\u003escale to millimeters\u003c\/strong\u003e, answer \u003cstrong\u003eNo\u003c\/strong\u003e. The file is already in millimeters; the small label parts trigger that question.\u003cbr\u003e\n- If it asks to load as \u003cstrong\u003ea single object with multiple parts\u003c\/strong\u003e, answer \u003cstrong\u003eYes\u003c\/strong\u003e. That keeps every label in its recess.\u003cbr\u003e\n- Every part loads on filament 1. Change only the BASE part to your second filament; the labels and logo stay on the first, and that's your two-colour print.\u003cbr\u003e\n- A warning that labels are not on the surface is expected: they sit inside recesses on purpose. The colour changes are banded by depth on purpose to keep them few.\u003cbr\u003e\n- Using the STLs instead? Import both files together without re-arranging, so the labels stay on their pads.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use under the \u003ca href=\"\/pages\/digital-license\"\u003eMountaineer Maker Digital Product License (v1.0)\u003c\/a\u003e. You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.\u003c\/p\u003e\n\n\u003cp\u003ePrefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.\u003c\/p\u003e\n","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":67612006645996,"sku":"TEK-006-DIG","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/tek-006-dig-01-metric-organizer-render.jpg?v=1792945105","url":"https:\/\/mountaineermaker.com\/products\/milwaukee-packout-3-8-drive-impact-socket-organizer-stl-3mf-file-tekton-sid91211-6-point-metric-shallow-deep-38-pc","provider":"Mountaineer Maker","version":"1.0","type":"link"}