{"product_id":"milwaukee-packout-48-22-8430-8435-1-4-drive-modular-impact-socket-organizer-insert-with-tool-storage-stl-file-for-milwaukee-shockwave-49-66-7000-7001-7002-7003-6-point-sae-metric-shallow-deep-48-pc","title":"Milwaukee Packout 48-22-8430\/8435 1\/4\" Drive Modular Impact Socket Organizer Insert with Tool Storage STL File for Milwaukee Shockwave 49-66-7000, 7001, 7002 \u0026 7003 6-Point SAE \u0026 Metric, Shallow \u0026 Deep (48-Pc)","description":"\u003cp\u003e\u003cstrong\u003ePrint the organizer yourself.\u003c\/strong\u003e This is the 3D print file for our Milwaukee SHOCKWAVE organizer insert with tool storage: all four 1\/4\" drive impact sets, 49-66-7000, 7001, 7002 and 7003, 6-point SAE and metric, shallow and deep, 48 sockets, every size labeled. The socket sections sit at the top of a full-depth box, with open storage below.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL FILE ONLY\u003cbr\u003e\nYou receive a ZIP download right after purchase. Sockets, tools, batteries, the organizer and the Packout case are not included, and nothing is shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- \u003cstrong\u003eFive printed parts\u003c\/strong\u003e: the storage box, the removable divider, and three lift-out sections (metric, SAE, and an open section for 1\/4\" extensions or a ratchet)\u003cbr\u003e\n- \u003cstrong\u003eSTL files\u003c\/strong\u003e for every part. The metric and SAE sections each come as a body file plus a separate labels file, so the size labels and logo can print in a second colour\u003cbr\u003e\n- \u003cstrong\u003e3MF files\u003c\/strong\u003e for the metric and SAE sections, with the labels already set up as a second colour\u003cbr\u003e\n- \u003cstrong\u003eA Start-here card\u003c\/strong\u003e linking to our \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e: recommended settings, plus how to split a part with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm\u003cbr\u003e\n- \u003cstrong\u003eThe license\u003c\/strong\u003e: the Mountaineer Maker Digital Product License (v1.0) as a PDF\u003c\/p\u003e\n\n\u003cp\u003eFITS\u003cbr\u003e\n✔ Milwaukee Packout 48-22-8435 (Compact Deep Organizer), or one side of a 48-22-8430 (Deep Organizer)\u003cbr\u003e\nBuilt to Milwaukee's SHOCKWAVE 1\/4\" impact sockets: SAE 3\/16\" to 9\/16\" and metric 4mm to 15mm, shallow and deep, including the 4.5mm and 5.5mm half sizes. Too tall for the low-profile organizers (48-22-8431 and 48-22-8436).\u003cbr\u003e\nStorage space under the sections: about 283 × 179 mm at the floor and 54 mm (2.14 in.) high, with the divider set where you need it.\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL: pockets are cut to measured Milwaukee SHOCKWAVE 1\/4\" impact sockets. Other brands may not fit. Message us before buying if you're unsure.\u003c\/p\u003e\n\n\u003cp\u003ePRINTER REQUIREMENTS\u003cbr\u003e\n- The storage box is 293 × 193 mm, so your bed must be at least about 300 × 200 mm. It does \u003cstrong\u003enot\u003c\/strong\u003e fit 256 × 256 mm beds in one piece. The sections and divider are each under 183 mm long.\u003cbr\u003e\n- \u003cstrong\u003eSmaller bed? Your slicer can cut it to fit.\u003c\/strong\u003e See the step-by-step \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e for Creality Print, Bambu Studio and Orca Slicer.\u003cbr\u003e\n- No supports needed: print the box and sections upright as they load, and the divider flat with its rib up\u003cbr\u003e\n- Designed on a Creality K2 Plus; we print ours in PETG\u003c\/p\u003e\n\n\u003cp\u003eTWO-COLOUR LABELS (optional)\u003cbr\u003e\n- Open the 3MF files for the metric and SAE sections: the labels are already a second part. Load two filaments, one for the body and one for the labels.\u003cbr\u003e\n- Or load each section's body file together with its labels file as one multi-part object and assign the labels a second filament.\u003cbr\u003e\n- For one colour, print the body files alone.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use under the \u003ca href=\"\/pages\/digital-license\"\u003eMountaineer Maker Digital Product License (v1.0)\u003c\/a\u003e. You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.\u003c\/p\u003e\n\n\u003cp\u003ePrefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.\u003c\/p\u003e","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":68180531642604,"sku":"MIL-018-DIG","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/mil-018-01-hero-design-render.jpg?v=1794061019","url":"https:\/\/mountaineermaker.com\/products\/milwaukee-packout-48-22-8430-8435-1-4-drive-modular-impact-socket-organizer-insert-with-tool-storage-stl-file-for-milwaukee-shockwave-49-66-7000-7001-7002-7003-6-point-sae-metric-shallow-deep-48-pc","provider":"Mountaineer Maker","version":"1.0","type":"link"}