{"product_id":"tool-box-drawer-3-8-drive-upright-impact-socket-organizer-stl-3mf-file-tekton-sid91106-sid91107-sid91211-3-styles","title":"Tool Box Drawer 3\/8\" Drive Upright Impact Socket Organizer STL\/3MF File for Tekton SID91106, SID91107 \u0026 SID91211 6-Point Metric, Shallow or Deep, 6–24mm (3 Styles)","description":"\u003cp\u003e\u003cstrong\u003ePrint the holder yourself.\u003c\/strong\u003e These are the 3D print files for our Tekton 3\/8\" drive upright socket holders: 6-point metric impact, 6–24mm, shallow or deep, every size labeled. All three styles are in one download: Wedge, Squared and Strips.\u003c\/p\u003e\n\n\u003cp\u003eDIGITAL FILE ONLY\u003cbr\u003e\nYou receive a ZIP download right after purchase. Sockets, holders and toolbox are not included, and nothing is shipped.\u003c\/p\u003e\n\n\u003cp\u003eWHAT YOU'LL RECEIVE\u003cbr\u003e\n- \u003cstrong\u003eThree 3MF files\u003c\/strong\u003e, one per style (Wedge, Squared, Strips): each holder with its size labels and logo already in place as separate parts, ready for a two-color print\u003cbr\u003e\n- \u003cstrong\u003eSix STL files\u003c\/strong\u003e, a body and a labels file for each style, for slicers that prefer STL\u003cbr\u003e\n- \u003cstrong\u003eA Start-here card\u003c\/strong\u003e linking to our \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e: recommended settings, plus how to split a holder with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is shorter than about 300 mm\u003cbr\u003e\n- \u003cstrong\u003eThe license\u003c\/strong\u003e: the Mountaineer Maker Digital Product License (v1.0) as a PDF\u003c\/p\u003e\n\n\u003cp\u003eWHICH STYLE?\u003cbr\u003e\n- \u003cstrong\u003eWedge\u003c\/strong\u003e: two rows of slots hug a center label strip. The leanest of the three.\u003cbr\u003e\n- \u003cstrong\u003eSquared\u003c\/strong\u003e: a clean rectangle that sits square against drawer walls and other organizers.\u003cbr\u003e\n- \u003cstrong\u003eStrips\u003c\/strong\u003e: two loose strips, 6–15 and 16–24, for a long, narrow space. Run them end to end, side by side, or split them across a drawer.\u003cbr\u003e\nOne holder has 19 slots and takes your shallow sockets or your deep sockets. Own both? Print two.\u003c\/p\u003e\n\n\u003cp\u003eFITS\u003cbr\u003e\n✔ Tekton SID91106 or SID91302 (shallow) and SID91107 or SID91303 (deep): one holder. SID91211 or SID91401: two holders.\u003cbr\u003e\nMade for an open tool box or tool chest drawer, not a Packout organizer. Slot sizes are taken from calipers on the actual sockets.\u003c\/p\u003e\n\n\u003cp\u003e⚠ NOT UNIVERSAL: slots are cut to Tekton 3\/8\" 6-point metric impact sockets, shallow and deep. Semi-deep sockets, 12-point sockets and other brands may not fit. Sockets sit loose in their slots and can lean a little; there are no magnets. Use it on a drawer mat. Message us before buying if you're unsure.\u003c\/p\u003e\n\n\u003cp\u003ePRINTER REQUIREMENTS\u003cbr\u003e\n- Sizes: Wedge 298 × 90 × 11 mm; Squared 270 × 90 × 11 mm; Strips 222 × 46 and 291 × 46 mm, 11 mm tall. The longest part needs a bed of about 300 mm. It does \u003cstrong\u003enot\u003c\/strong\u003e fit a 256 × 256 mm bed in one piece.\u003cbr\u003e\n- \u003cstrong\u003eSmaller bed? Your slicer can cut it to fit.\u003c\/strong\u003e See the step-by-step \u003ca href=\"\/pages\/print-instructions\"\u003eprint instructions\u003c\/a\u003e for Creality Print, Bambu Studio and Orca Slicer.\u003cbr\u003e\n- No supports needed: every overhang is designed at 45° or steeper\u003cbr\u003e\n- Designed and tested on a Creality K2 Plus; we print ours in PETG\u003c\/p\u003e\n\n\u003cp\u003eOPENING THE 3MF (two colors)\u003cbr\u003e\n- Each 3MF loads as one object with two parts, BASE and LABELS, with the filaments already assigned: filament 1 for the body, filament 2 for the labels. Load two filaments.\u003cbr\u003e\n- A warning that labels are not on top of the body is expected: they sit on a lower deck between the slots on purpose.\u003cbr\u003e\n- Using the STLs instead? Import a style's body and labels files together without re-arranging, so the labels stay in place.\u003c\/p\u003e\n\n\u003cp\u003eLICENSE\u003cbr\u003e\nPersonal use under the \u003ca href=\"\/pages\/digital-license\"\u003eMountaineer Maker Digital Product License (v1.0)\u003c\/a\u003e. You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.\u003c\/p\u003e\n\n\u003cp\u003ePrefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.\u003c\/p\u003e\n","brand":"Mountaineer Maker","offers":[{"title":"Default Title","offer_id":68121111331052,"sku":"TEK-019-DIG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6250\/0332\/files\/tek-019-dig-01-squared-render.jpg?v=1794170661","url":"https:\/\/mountaineermaker.com\/products\/tool-box-drawer-3-8-drive-upright-impact-socket-organizer-stl-3mf-file-tekton-sid91106-sid91107-sid91211-3-styles","provider":"Mountaineer Maker","version":"1.0","type":"link"}