Bauer Modular Drawer 71125 1/4" & 3/8" Drive Socket Organizer STL File for Husky Chrome SAE Shallow & Deep (45-Pc)

Print the organizer yourself. This is the 3D print file for our Husky 1/4" and 3/8" drive organizer insert for the Bauer 71125 modular drawer: 45 Husky chrome SAE sockets, shallow and deep, every socket lying flat in its own labeled pocket, with storage bins along the back.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- Two 3MF files: the organizer as a left piece and a right piece, with the size labels and MM logo already set for a second colour
- Two STL files: the same two pieces for a one-colour print, the same design we print for the finished insert
- Three STL files: the risers that lift the organizer level above the drawer's floor ribs
- A Start-here card linking to our print instructions: recommended settings, plus how to split a part with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer)
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

SOCKETS COVERED (Husky chrome SAE, 45 sizes)
- 3/8" drive shallow, 13 sockets 1/4"–1"
- 3/8" drive deep, 10 sockets 5/16"–7/8"
- 1/4" drive shallow, 11 sockets 5/32"–9/16"
- 1/4" drive deep, 11 sockets 5/32"–9/16"

QUICK SCAN
- 3/8" drive across the back, 1/4" drive across the front, every row in size order
- Every size labeled between its shallow and deep pocket
- Three storage bins along the back, plus open pockets where a size has no deep socket
- Print it yourself, in any colors you want

FITS
✔ Bauer modular drawer 71125, both the original drawer and the current one with divider posts on the floor ribs: the two pieces sit side by side on the included risers and drop straight in

⚠ NOT UNIVERSAL: pockets are cut to Husky's 1/4" and 3/8" drive chrome SAE sockets. Sockets from another brand, or metric or impact sockets, may not seat correctly. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- The organizer comes in two pieces, about 275 × 279 × 24 mm and 124 × 279 × 24 mm (398 × 279 × 39 mm assembled on the risers). The risers are 122 × 279 × 15 mm (two) and 118 × 279 × 15 mm (one).
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print each part as it loads, flat side down
- Designed on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- Open a piece's 3MF in Orca Slicer, Bambu Studio or Creality Print: the labels are already painted for filament 2. Give filament 2 your label colour.
- Prefer one colour? Print the STL instead.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer insert in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.