Mountaineer Maker

Bauer Modular Drawer 71125 3/8" Drive Impact Socket Organizer STL/3MF File for Harbor Freight Icon 59750/59739 6-Point SAE, Shallow & Deep, 5/16"–1" (24-Pc)

Fits half of a Bauer 71125 drawer · 3/8" SAE impact STL/3MF · 24 sockets, Icon 59750 + 59739

$15.00

Instant download — sent to your email after purchase

Prefer it printed? Get the finished organizer →

Engineered, built, and test-fit before it ships.

Digital License

✓Personal use only

✓Print for yourself or as a personal gift

✗No resale of file or prints

✗No sharing or distributing

Read the full Digital Product License (v1.0)

Icon3/8" DriveSAEImpact

Details

Print the organizer yourself. This is the 3D print file for our half-drawer Icon organizer insert for the Bauer 71125 modular drawer: both Harbor Freight Icon 3/8" drive SAE impact sets, 59750 shallow and 59739 deep, 24 sockets from 5/16" to 1", 6-point, every size labeled.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- One 3MF file: the organizer with its base and labels already set up as one two-color object
- Two STL files: the organizer base, and its labels already in place for a second color
- One STL file: the push-in leg. Print 9 for this organizer
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

SIZES COVERED (Icon 59750 and 59739)
5/16" · 3/8" · 7/16" · 1/2" · 9/16" · 5/8" · 11/16" · 3/4" · 13/16" · 7/8" · 15/16" · 1"

FITS
✔ Half of a Bauer modular drawer 71125, on either side. It stands on 9 push-in legs that lift it over the floor ribs, and the other half of the drawer stays open for other tools or the metric half.

⚠ NOT UNIVERSAL: pockets are cut to Icon's 3/8" SAE shallow and deep impact sockets. Sockets from another brand, or a different drive size, may not seat correctly. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- The organizer is one piece, 259 × 199 × 25 mm. Your bed must be at least about 265 × 205 mm, so it doesn't fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut the organizer to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print each part as it loads, the organizer flat side down and the legs standing on their feet
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOR LABELS
- Easiest: open the 3MF. Base and labels are already one object on two filaments; pick your two colors.
- With the STLs: import the base and its labels file together and load them as one object with multiple parts, without re-arranging, so every label stays in its place. Give the labels part your second filament.
- One color only? Leave both parts on the same filament.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.

Good to know

  • Insert only — adapters, storage trays, tools and toolbox are not included.
  • Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
  • Color may vary slightly from the photos, due to monitor settings and material batches.
  • Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Precision-Fit

Designed from the actual sockets.

Engineered, Built & Test-Fit

Engineered, built, and test-fit before it ships.

Made in West Virginia

Built to go together

Goes with this organizer

Optional add-ons. Some organizers work fine on their own; add only what fits your setup.