
Mountaineer Maker
Bauer Modular Drawer 71125 3/8" Impact Socket Organizer STL File – Icon SAE & Metric (50-Pc)
Fits Bauer 71125 drawer · 3/8" SAE & metric STL · Icon, 50-Pc
Instant download — sent to your email after purchase
Prefer it printed? Get the finished organizer →
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Print the organizer yourself. This is the 3D print file for our Icon impact socket organizer for the Bauer 71125 modular drawer: all four Harbor Freight Icon 3/8" drive impact sets in one drawer, 50 sockets, SAE and metric, standard and deep, every size labeled.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- STL file: the organizer as one piece, the same design we print for the finished insert
- Three STL files: the spacer grid (left, center and right) that lifts the organizer level above the drawer's floor ribs
- STL file: a snap-in drawer label for the label slot on the drawer face
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer)
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
SETS COVERED (Icon item numbers)
- SAE standard, 12 sockets 5/16"–1": 59750
- SAE deep, 12 sockets 5/16"–1": 59739
- Metric standard, 13 sockets 7–19 mm: 70432
- Metric deep, 13 sockets 7–19 mm: 59756
QUICK SCAN
- All four Icon 3/8" impact sets in one Bauer 71125 drawer
- Each labeled column holds the standard socket and its deep partner
- Three open bins at the back for extensions and adapters
- Print it yourself, in any colors you want
FITS
✔ Bauer modular drawer 71125, both the original drawer and the current one with divider posts on the floor ribs: the organizer sits on the included spacer grid and drops straight in
⚠ NOT UNIVERSAL: pockets are cut to Icon's 3/8" standard and deep impact sockets. Sockets from another brand, or a different drive, may not seat correctly. Message us before buying if you're unsure.
PRINTER REQUIREMENTS
- The organizer is one piece, 398 × 279 × 25.5 mm, larger than most printer beds, so plan to split it. The spacers are 15 mm tall: 122 × 279 mm (left and right) and 118 × 279 mm (center). The drawer label is about 72 × 24 mm.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print each part as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG
TWO-COLOUR LABELS (optional)
- The size labels are raised above their decks, and the decks sit at three heights, so a single filament change can't colour them.
- To print the labels in a second colour, paint the label tops with your slicer's colour-painting tool (Creality Print, Bambu Studio and Orca Slicer all have one). Otherwise the organizer prints in one colour.
- The drawer label is made for a second colour on its raised text, and prints fine in one colour too.
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.
Made in West Virginia
Built to go together
Goes with this organizer
Optional add-ons. Some organizers work fine on their own; add only what fits your setup.