
Mountaineer Maker
Milwaukee Packout 48-22-8431 Center Socket Organizer STL File – GearWrench 80319 10mm Socket Variety Kit (1/4" & 3/8" Drive)
Fits Milwaukee Packout 48-22-8431 center compartment · GearWrench 80319 10mm STL · 10 sockets, 4 parts
Instant download — sent to your email after purchase
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Print the organizer yourself. This is the 3D print file for our Milwaukee Packout center-compartment insert for the GearWrench 80319 10mm socket set: ten 10mm sockets (standard, mid-length, deep, flex and magnetic, in 1/4" and 3/8" drive), each in its own pocket, with open storage underneath.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and Packout case are not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- Four STL files: the socket level and the storage level, each in two halves that key together end to end
- A Start-here card linking to our print instructions: recommended settings, plus how to split a part with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if you ever need to
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
FITS
✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer), center compartment
Built to the GearWrench 80319 10-piece 10mm socket set. The socket level sits on top of the storage level; lift it out to reach the storage underneath, and an opening at one end gives access to a pocket in the level below.
⚠ NOT UNIVERSAL: pockets are cut to the GearWrench 80319 sockets. Other brands may not fit. Message us before buying if you're unsure.
PRINTER REQUIREMENTS
- Four parts. Assembled, about 296 × 53 × 44 mm; the largest part is about 151 × 53 mm, so every part fits a 220 × 220 mm bed.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- Print each part as it loads, flat side down
- PETG recommended
TWO-COLOUR LABEL (optional)
- The "10MM" mark at the open end of the socket level stands 1.5 mm above the deck. To print it in a second colour, add a filament change on that part at the first layer above 9.5 mm.
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Don't have this exact set? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.