Mountaineer Maker

DeWALT ToughSystem DWST08020 Blank Insert – STL/STEP File

DeWALT ToughSystem DWST08020 box · full-size blank · STL/STEP download

$10.00

Instant download — sent to your email after purchase

Engineered, built, and test-fit before it ships.

Digital License

✓Personal use only

✓Print for yourself or as a personal gift

✗No resale of file or prints

✗No sharing or distributing

Read the full Digital Product License (v1.0)

Details

Design your own insert. This is the 3D print and CAD file for a blank insert that fills a DeWALT ToughSystem DWST08020 organizer box. It's a solid block about 36 mm thick, shaped to the box: it replaces the box's cups, runs wall to wall and rib to rib, and drops in either way round. Cut your own tool or socket pockets into it in CAD, or print it as a flat shelf.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. The box is not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- STEP file: the blank as an editable solid, the easiest way to cut your own pockets in CAD
- STL file: the blank in one piece, ready to slice
- Four corner STL files: the same blank in four pieces, for smaller printer beds
- A how-to sheet: printing it, which box it fits and how to set pocket depths
- A Start-here card linking to our print instructions: recommended settings and print tips
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

FITS
✔ DeWALT ToughSystem DWST08020 organizer box, with the cups removed

PLANNING YOUR POCKETS
The box lid is what holds tools in place when you carry it, so tools should sit just under the closed lid. Tall tools can stand above the top of the blank. Measure your own box and tools, then set your pocket depths to match.

SIZE AND PRINTER REQUIREMENTS
- Blank: about 329 × 193 × 36.5 mm, so one piece needs a bed of about 330 × 195 mm
- Corner pieces: about 165 × 97 × 36.5 mm each, printed separately and glued together
- Smaller bed? Use the corner pieces, or see the step-by-step print instructions for cutting it in Creality Print, Bambu Studio and Orca Slicer.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Don't want to design your own? Message us. We build organizers for specific socket sets.

Good to know

  • Insert only — adapters, storage trays, tools and toolbox are not included.
  • Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
  • Color may vary slightly from the photos, due to monitor settings and material batches.
  • Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.

Compatibility

Fits natively

DWST08020 · DeWALT ToughSystem Organizer

Always check the label on your storage case or drawer to confirm the exact model number, and compare it against the compatibility chart above. Contact us if you have questions.

Precision-Fit

Designed from the actual sockets.

Engineered, Built & Test-Fit

Engineered, built, and test-fit before it ships.

Made in West Virginia