Milwaukee Packout 1/2" Drive Deep Impact Socket Organizer STL/3MF File for Sunex China-Made 6-Point Metric, 10mm–36mm (27-Pc)

Print the organizer yourself. This is the 3D print file for our Milwaukee Packout organizer insert for China-made Sunex 1/2" drive deep impact sockets: 6-point metric, 10mm to 36mm, 27 pieces, every size labeled, nothing skipped.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer, drawer adapter and Packout drawer are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- Two 3MF files: the base and the support lid, each with its size labels already assigned to a second colour
- Four STL files: the base, the support lid, and a labels file for each, so the labels can print in a second colour
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

WHAT IT HOLDS
- Metric 6-point deep impact sockets: 10mm through 36mm, every size (27 sockets)
Each socket stands upright in its own labeled pocket in the base and passes through its own labeled hole in the support lid.

FITS
✔ Milwaukee Packout 48-22-8430 (Organizer) and 48-22-8435 (Compact Organizer), no adapter
✔ Standard tool chest drawer, no adapter
✔ Milwaukee Packout deep drawer, with the Mountaineer Maker drawer adapter (sold separately)
It has our standard nesting foot, so it sits on our other organizers.

⚠ NOT UNIVERSAL: pockets are cut to CHINA-made Sunex 6-point metric deep impact sockets. Taiwan-made Sunex sockets, another depth or another brand may not fit. China-made Sunex sockets do not carry a "TAIWAN" stamp; if yours are stamped TAIWAN, message us before buying.

PRINTER REQUIREMENTS
- Two pieces: the base is 293 × 193 × 48.5 mm and the support lid 293 × 193 × 10.5 mm (49 mm tall together). Your bed must be at least about 300 × 200 mm. Neither piece fits a 256 × 256 mm bed whole.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print each piece as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG
- Two colours, optional: open the 3MF files and load two filaments, or load each labels STL as a part of its piece. For one colour, use the base and lid STLs alone. The lid snaps into the base.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.