Milwaukee Packout 1/2" Drive Impact Socket Organizer STL File Set for GearWrench 89095 6-Point SAE & Metric, Shallow & Deep (65-Pc)

Print the organizers yourself. These are the 3D print files for our GearWrench 89095 organizer set: 1/2" drive impact sockets, SAE and metric, shallow, deep and hex bit, 6-point, plus both extensions and the universal joint. 65 pieces, every size labeled.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, extensions, universal joint, organizers and Packout case are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- Seven STL files: the deep organizer and its snap-in support lid, the standard organizer, and the storage tray, plus a separate labels file for the deep organizer, the lid and the standard organizer, so the size labels and logo can print in a second colour. The deep organizer holds the deep and hex bit sockets and both extensions; the standard organizer holds the shallow sockets and the universal joint, and sits on the storage tray so the closed Packout lid holds every socket.
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

FITS
✔ One Milwaukee Packout 48-22-8430 (Deep Organizer): both organizers side by side, the standard organizer on the storage tray
✔ Or two Milwaukee Packout 48-22-8435 (Compact Deep Organizer): the deep organizer in one, the standard organizer on the storage tray in the other
Built to GearWrench's 89095 1/2" impact sockets and accessories. Too tall for the low-profile organizers (48-22-8431 and 48-22-8436).

⚠ NOT UNIVERSAL: pockets are cut to measured GearWrench 89095 sockets. Other brands may not fit. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- Four pieces, each 293 × 193 mm: the deep organizer is 48.5 mm tall, its lid 13.6 mm, the standard organizer 57.5 mm and the storage tray 38.5 mm. Your bed must be at least about 300 × 200 mm. They do not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print every piece upright, as it sits in the box
- Designed on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- Load each piece together with its labels file as one multi-part object and assign the labels a second filament. The labels sit in place on top of the piece.
- For one colour, print the organizer, lid and tray files alone.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.