Milwaukee Packout 1/2" Drive Milwaukee Shockwave SAE Shallow 6-Point Impact Socket Organizer STL File – No-Skip Complete Series (3/8"–1-9/16")

Print the organizer yourself. This is the 3D print file for our Milwaukee SHOCKWAVE organizer insert: the complete 1/2" drive SAE standard-depth (shallow) impact lineup, 6-point, 3/8" through 1-9/16", 20 sockets, no skipped sizes, every size labeled. Milwaukee sells this range across several sets; the file holds all 20 sizes however you've built your collection.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- STL file: the whole organizer as one piece, the same design we print for the finished insert
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

FITS
✔ Standard tool chest drawers with at least 58 mm of clear height (the organizer stands 57.5 mm tall)
With an adapter: Milwaukee Packout deep organizers (48-22-8430 and 48-22-8435) and Packout drawers, using our spacer tray or drawer adapters (sold separately). Too tall for the low-profile organizers (48-22-8431 and 48-22-8436).
Built to Milwaukee's SHOCKWAVE 1/2" SAE standard-depth impact sockets, 3/8" through 1-9/16". The sockets stand upright in labeled pockets on four stepped decks.

⚠ NOT UNIVERSAL: pockets are cut to Milwaukee SHOCKWAVE 1/2" SAE standard-depth impact sockets. Other brands and deep sockets may not fit. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- One piece, 293 × 193 × 57.5 mm. Your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print it as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- The size labels are raised 1 mm, on four decks at different heights, so a single filament change won't colour them on its own.
- To print them in a second colour, paint the label tops with your slicer's colour-painting tool (Creality Print, Bambu Studio and Orca Slicer all have one). Otherwise the organizer prints in one colour.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.