Milwaukee Packout 1/2" Drive Shallow Impact Socket Organizer STL/3MF File for GearWrench 89072 6-Point SAE, 3/8"–1-1/2" (19-Pc)

Print the organizer yourself. This is the 3D print file for our GearWrench SAE impact socket organizer insert: the 19 SAE standard-length sockets of the GearWrench 89072 1/2" drive impact set, 3/8" to 1-1/2", 6-point, each standing in its own labeled pocket, in size order with the largest at the front.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- One 3MF file: the organizer with its body and labels already set up as one two-color object
- Two STL files: the organizer body, and its labels already in place for a second color
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

SIZES COVERED (GearWrench 89072, SAE standard)
3/8" · 7/16" · 1/2" · 9/16" · 5/8" · 11/16" · 3/4" · 13/16" · 7/8" · 15/16" · 1" · 1-1/16" · 1-1/8" · 1-3/16" · 1-1/4" · 1-5/16" · 1-3/8" · 1-7/16" · 1-1/2"

FITS
✔ Milwaukee Packout deep organizers 48-22-8430 and 48-22-8435, on our 33.5mm spacer tray (sold separately) so the lid holds the sockets in place
✔ Standard tool chest drawers: drops straight in
The organizer nests top and bottom, so it stacks with our other organizers and drawer adapters.

⚠ NOT UNIVERSAL: pockets are cut to GearWrench's 89072 1/2" SAE standard impact sockets, from caliper measurements of the actual set. Deep sockets, metric sockets, or sockets from another set or brand may not seat correctly. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- One piece, 293 × 193 × 58 mm. Your bed must be at least about 300 × 200 mm. It doesn't fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut the organizer to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print it as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOR LABELS
- Easiest: open the 3MF. Body and labels are already one object on two filaments; pick your two colors.
- With the STLs: import the body and its labels file together and load them as one object with multiple parts, without re-arranging, so every label stays in its place. Give the labels part your second filament.
- One color only? Leave both parts on the same filament.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.