Milwaukee Packout 1/2" Drive Shallow Impact Socket Organizer STL File for Sunex 2640 China-Made 6-Point SAE, 3/8"–1-1/2" (19-Pc)

Print the organizer yourself. This is the 3D print file for our Milwaukee Packout organizer insert for the China-made Sunex 2640 1/2" drive shallow impact set: 6-point SAE, 3/8" to 1-1/2", 19 pieces, every size labeled.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer, drawer adapter and Packout drawer are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- One STL file: the whole organizer as one piece, with the size labels and logo raised 0.5 mm on the deck
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

WHAT IT HOLDS
- SAE 6-point shallow impact sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2" (19 sockets)
Every socket stands upright in its own labeled pocket.

FITS
✔ Milwaukee Packout 48-22-8430 (Organizer) and 48-22-8435 (Compact Organizer), with the Mountaineer Maker 37 mm spacer tray under it (sold separately)
✔ Milwaukee Packout slim drawer, with the Mountaineer Maker drawer adapter (sold separately)
✘ Too tall for the low-profile 48-22-8431 and 48-22-8436
It has our standard nesting foot and top, so it stacks and nests with our other organizers.

⚠ NOT UNIVERSAL: pockets are cut to the CHINA-made Sunex 2640 set. Taiwan-made Sunex sockets, another depth or another brand may not fit. China-made Sunex sockets do not carry a "TAIWAN" stamp; if yours are stamped TAIWAN, message us before buying.

PRINTER REQUIREMENTS
- One piece, 293 × 193 × 54 mm. Your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print it as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG
- Two colours, optional: the size labels and logo are raised 0.5 mm, so you can paint them a second colour with your slicer's paint tool, or print it all in one colour.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.