Milwaukee Packout 1/2" Drive Swivel Impact Socket Organizer STL/3MF File for Harbor Freight Icon 59741 6-Point SAE (14-Pc)

Print the organizer yourself. This is the 3D print file for our Icon swivel impact socket organizer insert: the complete Harbor Freight Icon 59741 1/2" drive SAE impact swivel set, 14 sockets from 7/16" to 1-1/4", 6-point, each lying flat in its own labeled pocket. It now includes the matching retention lid, which keeps the swivels in their seats under a Packout lid.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- Two 3MF files, organizer and retention lid, each with the base and labels already set up as one two-colour object
- Four STL files: the organizer base and its labels, and the retention lid and its labels, each labels file already in place for a second colour
- The retention lid: a thin slab that drops into the top of the organizer and sits just above the sockets, so a swivel can't lift out of its seat under a Packout lid. No latch, a finger hole to lift it off, and a size map on top: every pocket outlined with its size inside
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

SIZES COVERED (Icon 59741)
7/16" · 1/2" · 9/16" · 5/8" · 11/16" · 3/4" · 13/16" · 7/8" · 15/16" · 1" · 1-1/16" · 1-1/8" · 1-3/16" · 1-1/4"

FITS
✔ Standard tool chest drawers: drops straight in
With a 37 mm spacer: Milwaukee Packout deep organizers 48-22-8430 and 48-22-8435
✘ Not the Packout low-profile organizers 48-22-8431 and 48-22-8436: the larger sockets in this set are too big for them.
Each swivel lies on its side in a cradle shaped to its drive end, shoulder and swivel end. Sizes are labeled on the deck and in every pocket, so you can read them with the socket in or out. The retention lid sits flush with the organizer's rim, so it adds no height.

⚠ NOT UNIVERSAL: pockets are cut to Icon's 1/2" SAE swivel impact sockets, from caliper measurements of the actual set. The swivel head is larger than a standard socket of the same size, so standard sockets, Icon's metric swivels or other brands' swivels may not seat correctly. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- Organizer: one piece, 293 × 193 × 54 mm. Retention lid: one piece, 293 × 193 × 4 mm. Your bed must be at least about 300 × 200 mm. Neither fits 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut the organizer to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print each part as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS
- Easiest: open the 3MF. Base and labels are already one object on two filaments; pick your two colours.
- With the STLs: import a base and its labels file together and load them as one object with multiple parts, without re-arranging, so every label stays in its place. Give the labels part your second filament.
- One colour only? Leave both parts on the same filament.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.