Mountaineer Maker
Milwaukee Packout 1/2" Milwaukee Shockwave SAE Deep 6-Point Impact Socket Organizer STL File – No-Skip Complete Series (3/8"–1-9/16")
Fits Milwaukee Packout 48-22-8430 & 48-22-8435 · 1/2" Milwaukee Shockwave SAE deep impact STL · 20 sockets, no-skip 3/8"–1-9/16"
Instant download — sent to your email after purchase
Prefer it printed? Get the finished organizer →
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Print the organizer yourself. This is the 3D print file for our Milwaukee SHOCKWAVE organizer insert: the complete 1/2" drive SAE deep impact lineup, 6-point, 3/8" through 1-9/16", 20 sockets, no skipped sizes, every size labeled. Milwaukee sells 19 of these sizes in its 49-66-7012 set; the 1-9/16" is sold individually, and it has its own pocket too.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and Packout case are not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- Two STL files (organizer base and support lid): the same two-piece design we print for the finished insert. The deep sockets stand in the base, and the lid snaps in on top to brace them part way up.
- A Start-here card linking to our print instructions: recommended settings, plus how to split each piece with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
FITS
✔ Milwaukee Packout 48-22-8430 (Deep Organizer) and 48-22-8435 (Compact Deep Organizer)
✔ Tool chest drawers with at least 86 mm of clear height (the sockets stand about 85 mm tall)
Built to Milwaukee's SHOCKWAVE 1/2" SAE deep impact sockets, 3/8" through 1-9/16". Too tall for the low-profile organizers (48-22-8431 and 48-22-8436).
⚠ NOT UNIVERSAL: pockets are cut to Milwaukee SHOCKWAVE 1/2" SAE deep impact sockets. Other brands and standard-depth sockets may not fit. Message us before buying if you're unsure.
PRINTER REQUIREMENTS
- Two pieces, each 293 × 193 mm: the base is 48.5 mm tall and the lid 11 mm. Your bed must be at least about 300 × 200 mm. They do not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print each piece as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG
TWO-COLOUR LABELS (optional)
- The size labels and logo are raised 1 mm on top of the lid. To print them in a second colour, add a filament change at the first layer above 10.0 mm on the lid and keep it to the end.
- The base prints in one colour.
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Compatibility
Same mating interface as the adapters — stacks on a shelving unit, a workbench, or a deep drawer.
Always check the label on your storage case or drawer to confirm the exact model number, and compare it against the compatibility chart above. Contact us if you have questions.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.