Mountaineer Maker

Milwaukee Packout 1/4" Drive Modular Impact Socket Organizer STL File for Milwaukee Shockwave 49-66-7000, 7001, 7002 & 7003 6-Point SAE & Metric, Shallow & Deep (48-Pc)

Fits Milwaukee Packout 48-22-8431 & 48-22-8436 · 1/4" Milwaukee Shockwave SAE & metric impact STL/3MF · 48 sockets, 49-66-7000 to 7003

$15.00

Instant download — sent to your email after purchase

Prefer it printed? Get the finished organizer →

Engineered, built, and test-fit before it ships.

Digital License

✓Personal use only

✓Print for yourself or as a personal gift

✗No resale of file or prints

✗No sharing or distributing

Read the full Digital Product License (v1.0)

Milwaukee1/4" DriveMetricSAEImpact

Details

Print the organizer yourself. This is the 3D print file for our modular Milwaukee Packout organizer for the Milwaukee Shockwave 1/4" drive impact sets 49-66-7000, 49-66-7001, 49-66-7002 and 49-66-7003: 6-point SAE and metric, shallow and deep, 48 sockets, every size labeled. An outer frame holds three sections that lift out (metric, SAE, and an open section for extensions or a ratchet), so you can take just the one you need to the bench.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, tools, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- One STL file per printed part, four parts in all: the outer frame, the metric section, the SAE section and the open section
- Two 3MF files, one for the metric section and one for the SAE section, with the raised size labels already set up as a second colour
- Two STL files per labeled section (body and labels), if your slicer works better with STLs
- A Start-here card linking to our print instructions: recommended settings, plus how to split the frame with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

WHAT GOES WHERE
- Metric section (28 sockets): 4mm–15mm including the 4.5mm and 5.5mm half sizes, shallow sockets upright and deep sockets lying flat in labeled troughs
- SAE section (20 sockets): 3/16"–9/16", shallow upright and deep lying flat
- Open section: room for your 1/4" extensions or a ratchet, with a finger ledge on each side to lift it out
- Retention arms on the larger deep sockets, sized from the actual sockets
Milwaukee sells this range as the 49-66-7000 (SAE shallow), 49-66-7001 (SAE deep), 49-66-7002 (metric shallow) and 49-66-7003 (metric deep) sets.

FITS
✔ Milwaukee Packout low-profile organizers 48-22-8431 and 48-22-8436
✔ Standard tool chest drawers (the organizer is 293 × 193 × 41 mm)
With an adapter or spacer (sold separately): the deep Packout organizers 48-22-8430 and 48-22-8435, and Packout drawers. The frame nests with our other organizers, above and below.

⚠ NOT UNIVERSAL: pockets are cut to the exact dimensions of Milwaukee Shockwave 1/4" 6-point impact sockets. Sockets from a different brand or a different set may not fit.

PRINTER REQUIREMENTS
- The largest part is the frame, 293 × 193 mm and 41 mm tall; the three sections are 182 mm wide or less. Your bed must be at least about 300 × 200 mm for the frame. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- Print each part as it loads, flat side down. No supports needed
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- Open the 3MF files and load two filaments: the body prints in the first, the raised labels in the second. Prefer one colour? Print the STL files instead. The frame and the open section print in one colour.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.

Good to know

  • Insert only — adapters, storage trays, tools and toolbox are not included.
  • Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
  • Color may vary slightly from the photos, due to monitor settings and material batches.
  • Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.

Compatibility

Stacks on and under other organizers

Always check the label on your storage case or drawer to confirm the exact model number, and compare it against the compatibility chart above. Contact us if you have questions.

Precision-Fit

Designed from the actual sockets.

Engineered, Built & Test-Fit

Engineered, built, and test-fit before it ships.

Made in West Virginia