Milwaukee Packout 1/4" Modular Socket Organizer STL File – GearWrench 80300P 6-Point SAE & Metric (51-Pc)

Print the organizer yourself. This is the 3D print file for our modular Milwaukee Packout organizer for the GearWrench 80300P 1/4" drive set: 6-point SAE and metric, standard and deep, 46 sockets plus the five drive tools, every socket labeled. An outer frame holds three removable parts (an SAE tray, a metric tray and a tool rack), so you can lift just the one you need out to the bench. A one-piece version is included too.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, tools, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- Four STL files for the modular organizer, one per printed part: the outer frame, the SAE tray, the metric tray and the tool rack. The same design we print for the finished organizer
- One STL file for the one-piece organizer: the same socket layout as a single part, with an open bay that takes the same tool rack
- A Start-here card linking to our print instructions: recommended settings, plus how to split the frame or the one-piece with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

WHAT GOES WHERE
- SAE tray (20 sockets): 3/16"–9/16", standard sockets upright and deep sockets lying flat in labeled troughs
- Metric tray (26 sockets): 4mm–15mm including 5.5mm, standard sockets upright and deep sockets lying flat
- Tool rack: the 120XP ratchet, the thumbwheel ratchet, the 2" and 6" extensions and the universal joint
GearWrench sells this range as the 80300P 51-piece set.

FITS
✔ Milwaukee Packout low-profile organizers 48-22-8431 and 48-22-8436
✔ Standard tool chest drawers (the organizer is 293 × 193 × 41 mm)
With an adapter or spacer (sold separately): the deep Packout organizers 48-22-8430 and 48-22-8435, and Packout drawers. The frame nests with our other organizers, above and below.

⚠ NOT UNIVERSAL: pockets are cut to the exact dimensions of GearWrench 80300P 1/4" 6-point sockets and tools. Sockets from a different brand or a different set may not fit.

PRINTER REQUIREMENTS
- The largest part is the frame (or the one-piece), 293 × 193 mm and 41 mm tall; the trays and the tool rack are 182 mm wide or less. Your bed must be at least about 300 × 200 mm for the frame. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- Print each part as it loads, flat side down. No supports needed
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- The size labels, headings and logo are raised, so you can print them in a second colour by painting the label tops with your slicer's colour-painting tool (Creality Print, Bambu Studio and Orca Slicer all have one). Otherwise each part prints in one colour.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.