Milwaukee Packout 3/8" Drive Impact Socket Organizer STL/3MF File for Tekton SID91211 6-Point Metric, Shallow & Deep, 6–24mm (38-Pc)

Print the organizer yourself. This is the 3D print file for our Tekton SID91211 organizer insert: the complete 3/8" drive metric impact set, shallow and deep, 6-point, 6–24mm, 38 pieces, every size labeled.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and Packout case are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- 3MF file: the whole organizer with the size labels and logo already in place as separate parts, ready for a two-colour print
- Two STL files (base and labels): the same design as two STLs, for slicers that prefer STL
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

FITS
✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) and 48-22-8436 (Compact Low-Profile Organizer)
Built to the Tekton SID91211 set, with pocket sizes taken from calipers on the actual sockets. Shallow sockets stand upright; deep sockets lie flat in labeled troughs.

⚠ NOT UNIVERSAL: pockets are cut to Tekton SID91211 3/8" metric impact sockets. Other brands and sets may not fit. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- One piece, 293 × 193 × 41 mm. Your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: every overhang is designed at 45° or steeper
- Designed and tested on a Creality K2 Plus; we print ours in PETG

OPENING THE 3MF (two colours)
- If your slicer asks to scale to millimeters, answer No. The file is already in millimeters; the small label parts trigger that question.
- If it asks to load as a single object with multiple parts, answer Yes. That keeps every label in its recess.
- Every part loads on filament 1. Change only the BASE part to your second filament; the labels and logo stay on the first, and that's your two-colour print.
- A warning that labels are not on the surface is expected: they sit inside recesses on purpose. The colour changes are banded by depth on purpose to keep them few.
- Using the STLs instead? Import both files together without re-arranging, so the labels stay on their pads.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.