Milwaukee Packout 3/8" Drive Impact Socket Organizer STL File for Harbor Freight Icon 70432/59756 6-Point Metric Deep & Shallow (26-Pc)

Print the organizer yourself. This is the 3D print file for our Icon metric impact socket organizer insert: both Harbor Freight Icon 3/8" drive metric impact sets in one organizer, the 70432 standard 13-piece and the 59756 deep 13-piece (7mm through 19mm), 26 sockets, every size labeled, plus a built-in storage compartment.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- STL file: the whole organizer as one piece, the same design we print for the finished insert
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

SIZES COVERED (Icon part numbers, standard / deep)
7mm 12SM7 / 12DM7 · 8mm 12SM8 / 12DM8 · 9mm 12SM9 / 12DM9 · 10mm 12SM10 / 12DM10 · 11mm 12SM11 / 12DM11 · 12mm 12SM12 / 12DM12 · 13mm 12SM13 / 12DM13 · 14mm 12SM14 / 12DM14 · 15mm 12SM15 / 12DM15 · 16mm 12SM16 / 12DM16 · 17mm 12SM17 / 12DM17 · 18mm 12SM18 / 12DM18 · 19mm 12SM19 / 12DM19

QUICK SCAN
- Both Icon 3/8" metric impact sets, standard and deep, in one organizer
- Built-in storage compartment (about 11.25" × 2.5" × 1.25") for a ratchet, extensions or anything else you keep with the set
- Pair it with our Icon SAE organizer to carry the whole Icon 3/8" impact lineup
- Print it yourself, in any colors you want

FITS
✔ Milwaukee Packout low-profile organizers 48-22-8431 and 48-22-8436, and standard tool chest drawers: drops straight in
With an adapter: Packout deep organizers (48-22-8430 and 48-22-8435) and Packout drawers, using our spacer trays or drawer adapters (sold separately).

⚠ NOT UNIVERSAL: pockets are cut to Icon's 3/8" metric standard and deep impact sockets. Sockets from another brand, or a different drive or system, may not seat correctly. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- One piece, 293 × 193 × 34 mm. Your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print it as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- The size labels are raised 1 mm above their decks, and the decks sit at several heights, so a single filament change can't colour them.
- To print the labels in a second colour, paint the label tops with your slicer's colour-painting tool (Creality Print, Bambu Studio and Orca Slicer all have one). Otherwise the organizer prints in one colour.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.