
Mountaineer Maker
Milwaukee Packout 3/8" Drive Socket Organizer STL/3MF File for Tekton SKT13101 6-Point SAE, Shallow & Deep, 1/4"–1" (36-Pc)
Fits Milwaukee Packout 48-22-8431 & 48-22-8436 · 3/8" Tekton SAE chrome STL/3MF · 36 pieces, SKT13101
Instant download — sent to your email after purchase
Prefer it printed? Get the finished organizer →
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Print the organizer yourself. This is the 3D print file for our Milwaukee Packout organizer for the Tekton SKT13101 3/8" drive SAE set: 15 shallow and 15 deep 6-point sockets from 1/4" to 1", plus the ratchet, the 1", 3" and 6" extensions, the universal joint and the 1/4" bit holder. 36 pieces, every size labeled.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, tools, organizer and toolbox are not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- One 3MF file with the raised size labels already set up as a second colour
- Two STL files (organizer body and labels), if your slicer works better with STLs
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
WHAT GOES WHERE
- Shallow sockets stand upright; deep sockets lie flat in labeled troughs
- The ratchet, the three extensions, the universal joint and the bit holder each have their own pocket
- Retention arms hold the deep 3/8" socket, sized from the actual socket
FITS
✔ Milwaukee Packout low-profile organizers 48-22-8431 and 48-22-8436
✔ Standard tool chest drawers (the organizer is 293 × 193 × 41 mm)
With an adapter or spacer (sold separately): the deep Packout organizers 48-22-8430 and 48-22-8435, and Packout drawers. It nests with our other organizers, above and below.
⚠ NOT UNIVERSAL: pockets are cut to the exact dimensions of the Tekton SKT13101 sockets and tools. Sockets from a different brand or a different set may not fit.
PRINTER REQUIREMENTS
- The organizer is 293 × 193 mm and 41 mm tall. Your bed must be at least about 300 × 200 mm to print it in one piece. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- Print it as it loads, flat side down. No supports needed
- Designed and tested on a Creality K2 Plus; we print ours in PETG
TWO-COLOUR LABELS (optional)
- Open the 3MF file and load two filaments: the body prints in the first, the raised labels in the second. Prefer one colour? Load both STL files together and print them in one filament.
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Compatibility
Same mating interface as the adapters — stacks on a shelving unit, a workbench, or a deep drawer.
Always check the label on your storage case or drawer to confirm the exact model number, and compare it against the compatibility chart above. Contact us if you have questions.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.