Milwaukee Packout 3/8" Drive Socket Organizer STL File for Tekton SKT15101 6-Point SAE, Shallow & Deep, 1/4"–1" (34-Pc)

Print the organizer yourself. This is the 3D print file for our Tekton SKT15101 organizer insert: the complete 3/8" drive SAE set, shallow and deep 6-point sockets 1/4"–1" plus the ratchet, both extensions and the universal joint, 34 pieces, every size labeled.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, tools, organizer and Packout case are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- STL file: the whole organizer as one STL, size labels recessed into the surface
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

FITS
✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) and 48-22-8436 (Compact Low-Profile Organizer)
Built to the Tekton SKT15101 set. Shallow sockets stand upright; deep sockets lie flat in labeled troughs; the ratchet, extensions and universal joint have their own pockets. It nests top and bottom, so prints stack.

⚠ NOT UNIVERSAL: pockets are cut to Tekton SKT15101 3/8" SAE sockets and tools. Other brands and sets may not fit. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- One piece, 293 × 193 × 41 mm. Your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: we print ours as-is with supports turned off
- Designed and tested on a Creality K2 Plus; we print ours in PETG

COLOUR
- The file prints in one colour as-is. The size labels are recessed, so they read clearly in a single colour.
- Want contrasting labels like ours? Colour the label faces with your slicer's paint tool. A warning that the labels are not on the top surface is expected: they sit inside recesses on purpose.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.