Mountaineer Maker
Milwaukee Packout 3/8" Shockwave Deep Impact Socket Organizer STL File – 49-66-7006 SAE (12-Pc)
Fits Milwaukee Packout 48-22-8431 & 48-22-8436 · 3/8" Milwaukee Shockwave SAE deep impact STL · 12 sockets, 49-66-7006
Instant download — sent to your email after purchase
Prefer it printed? Get the finished organizer →
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Print the organizer yourself. This is the 3D print file for our Milwaukee SHOCKWAVE organizer insert for the 3/8" drive SAE deep impact set 49-66-7006: 12 deep 6-point sockets, 5/16" through 1", every size labeled.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and Packout case are not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- STL file: the whole organizer as one piece
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
FITS
✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer) and 48-22-8436 (Compact Low-Profile Organizer)
Built to Milwaukee's SHOCKWAVE 3/8" SAE deep impact sockets, 5/16" through 1". The sockets lie flat in labeled troughs: 5/16"–3/4" in one row, 13/16"–1" in the other.
⚠ NOT UNIVERSAL: troughs are cut to Milwaukee SHOCKWAVE 3/8" SAE deep impact sockets. Other brands may not fit. Message us before buying if you're unsure.
PRINTER REQUIREMENTS
- One piece, 293 × 193 × 41 mm. Your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print it as it loads, flat side down
- PETG recommended
TWO-COLOR LABELS (optional)
- The size labels are raised 1.5 mm above the deck. To print them in a second color, use your slicer's paint or color tool on the raised labels. A plain filament change by height would also color the top of the rim.
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Compatibility
Same mating interface as the adapters — stacks on a shelving unit, a workbench, or a deep drawer.
Always check the label on your storage case or drawer to confirm the exact model number, and compare it against the compatibility chart above. Contact us if you have questions.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.