Mountaineer Maker
Milwaukee Packout 48-22-8430 1/2" Shockwave SAE Shallow Impact Socket Organizer STL File – Center Slot, 49-66-7010 3/8"–1-1/16" (12-Pc)
Fits the Milwaukee Packout 48-22-8430 center slot · 1/2" SHOCKWAVE SAE shallow impact STL · 12 sockets, 49-66-7010
Instant download — sent to your email after purchase
Prefer it printed? Get the finished organizer →
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Print the insert yourself. This is the 3D print file for our center-slot insert for the Milwaukee Packout 48-22-8430 organizer: it sits beside Milwaukee's own bins and holds 12 Milwaukee SHOCKWAVE 1/2" drive SAE shallow 6-point impact sockets, 3/8" to 1-1/16" (the 49-66-7010 set), every size labeled.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and Packout case are not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- Three STL files: the lower tray (7/8" to 1-1/16"), the spacer, and the upper tray (3/8" to 13/16") with its lift-out handle
- A Start-here card linking to our print instructions: recommended settings and how to load the files
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
FITS
✔ Milwaukee Packout 48-22-8430, center slot, with the Milwaukee bins left in place
Made for that slot only; it does not fit the other Packout organizers.
⚠ NOT UNIVERSAL: pockets are cut to Milwaukee SHOCKWAVE 1/2" SAE shallow impact sockets. Other brands and depths may not fit. Message us before buying if you're unsure.
PRINTER REQUIREMENTS
- Each part is about 296 × 53 mm. It fits a 300 mm bed straight, or a 256 × 256 mm bed placed diagonally.
- Smaller bed? See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: every part prints flat side down as supplied
- The size labels are raised. Print in one color, or paint the label tops in your slicer for a second color.
- Designed and tested on a Creality K2 Plus; we print ours in PETG
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.