Mountaineer Maker

Milwaukee Packout 48-22-8430/8435 1/4" Drive Modular Impact Socket Organizer Insert with Tool Storage STL File for Milwaukee Shockwave 49-66-7000, 7001, 7002 & 7003 6-Point SAE & Metric, Shallow & Deep (48-Pc)

Fits Milwaukee Packout 48-22-8435 & 48-22-8430 · 1/4" Milwaukee Shockwave SAE & metric impact STL/3MF · 48 sockets, 49-66-7000 to 7003 · tool storage underneath

$18.00

Instant download — sent to your email after purchase

Prefer it printed? Get the finished organizer →

Engineered, built, and test-fit before it ships.

Digital License

✓Personal use only

✓Print for yourself or as a personal gift

✗No resale of file or prints

✗No sharing or distributing

Read the full Digital Product License (v1.0)

Milwaukee1/4" DriveMetricSAEImpact

Details

Print the organizer yourself. This is the 3D print file for our Milwaukee SHOCKWAVE organizer insert with tool storage: all four 1/4" drive impact sets, 49-66-7000, 7001, 7002 and 7003, 6-point SAE and metric, shallow and deep, 48 sockets, every size labeled. The socket sections sit at the top of a full-depth box, with open storage below.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, tools, batteries, the organizer and the Packout case are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- Five printed parts: the storage box, the removable divider, and three lift-out sections (metric, SAE, and an open section for 1/4" extensions or a ratchet)
- STL files for every part. The metric and SAE sections each come as a body file plus a separate labels file, so the size labels and logo can print in a second colour
- 3MF files for the metric and SAE sections, with the labels already set up as a second colour
- A Start-here card linking to our print instructions: recommended settings, plus how to split a part with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

FITS
✔ Milwaukee Packout 48-22-8435 (Compact Deep Organizer), or one side of a 48-22-8430 (Deep Organizer)
Built to Milwaukee's SHOCKWAVE 1/4" impact sockets: SAE 3/16" to 9/16" and metric 4mm to 15mm, shallow and deep, including the 4.5mm and 5.5mm half sizes. Too tall for the low-profile organizers (48-22-8431 and 48-22-8436).
Storage space under the sections: about 283 × 179 mm at the floor and 54 mm (2.14 in.) high, with the divider set where you need it.

⚠ NOT UNIVERSAL: pockets are cut to measured Milwaukee SHOCKWAVE 1/4" impact sockets. Other brands may not fit. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- The storage box is 293 × 193 mm, so your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece. The sections and divider are each under 183 mm long.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print the box and sections upright as they load, and the divider flat with its rib up
- Designed on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- Open the 3MF files for the metric and SAE sections: the labels are already a second part. Load two filaments, one for the body and one for the labels.
- Or load each section's body file together with its labels file as one multi-part object and assign the labels a second filament.
- For one colour, print the body files alone.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.

Good to know

  • Insert only — adapters, storage trays, tools and toolbox are not included.
  • Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
  • Color may vary slightly from the photos, due to monitor settings and material batches.
  • Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.

Compatibility

Stacks on and under other organizers

Always check the label on your storage case or drawer to confirm the exact model number, and compare it against the compatibility chart above. Contact us if you have questions.

Precision-Fit

Designed from the actual sockets.

Engineered, Built & Test-Fit

Engineered, built, and test-fit before it ships.

Made in West Virginia