
Mountaineer Maker
Milwaukee Packout 48-22-8431/8436 Low-Profile Organizer Stackable Blank Insert – STL/STEP File
Milwaukee Packout 48-22-8436 / 48-22-8431 · low-profile organizer blank · STL/STEP download
Instant download — sent to your email after purchase
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Design your own Packout organizer. This is the 3D print and CAD file for a blank organizer insert for the Milwaukee Packout low-profile organizers: one fills a 48-22-8436, and two sit side by side in a 48-22-8431. It's a solid block with a flat top. Cut your own socket or tool pockets into it in CAD, or print it as a flat shelf.
WHY THIS BLANK IS DIFFERENT
- No wasted contour: a plain rectangle that sits on its foot, instead of copying every curve of the organizer's walls. Each layer has less than half the wall length of a bin-shaped insert, so more of your print time and plastic goes into the part you use.
- One shape, many toolboxes. A blank traced from the Packout bin fits that one bin. This blank is the Mountaineer Maker organizer body: the same footprint, 45° foot, top funnel and center groove as every MM organizer. That shape is the standard all our adapters are built around, so the organizer you design from it isn't locked to one box.
- Proven fit: it's the body of MM organizers that ship for these Packouts today.
ONE ORGANIZER, MANY HOMES
Keep the foot, the top rim and the outer shape when you cut your pockets, and your finished organizer goes everywhere an MM organizer goes:
✔ Milwaukee Packout low-profile organizers 48-22-8436 and 48-22-8431: drops straight in, no adapter
✔ Milwaukee Packout drawers: with our shallow drawer adapter or our medium/deep drawer adapter
✔ Klein Tools MODbox: with our adapters for the 54844MB drawer and the 54823MB 3-drawer toolbox
✔ Harbor Freight Bauer modular drawer 71125: with our Bauer drawer adapter
✔ Milwaukee Packout deep organizers 48-22-8430 and 48-22-8435: on one of our storage trays, which lifts the organizer to the lid, and two can stack
✔ Other MM organizers: nests on top of and underneath them
If you change toolboxes later, your organizer moves with you: buy the adapter, not a new organizer. Adapters and storage trays are sold separately, as printed parts, and the adapters also as STL files.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. The Packout is not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- STEP file: the blank as an editable solid, the easiest way to cut your own pockets in CAD
- STL file: the blank in one piece, ready to slice
- Four corner STL files: the same blank in four pieces, for smaller printer beds
- A how-to sheet: printing it, which organizer it fits and how to set pocket depths
- A Start-here card linking to our print instructions: recommended settings and print tips
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
FITS
✔ Milwaukee Packout 48-22-8436 low-profile organizer: one blank
✔ Milwaukee Packout 48-22-8431 low-profile organizer: two blanks side by side
Remove the organizer's bins first.
PLANNING YOUR POCKETS
The organizer lid is what holds tools in place when you carry it, so tools should sit just under the closed lid. Measure your own organizer and tools, then set your pocket depths to match.
To keep the adapter and stacking fit, cut only from the flat top: leave the foot, the center groove and the top rim as they are, and keep every pocket inside the outline.
SIZE AND PRINTER REQUIREMENTS
- Blank: about 293 × 193 × 41 mm, so one piece needs a bed of about 295 × 195 mm
- Corner pieces: about 147 × 97 × 41 mm each, printed separately and glued together
- Prints foot down, flat top up, no supports
- Smaller bed? Use the corner pieces, or see the step-by-step print instructions for cutting it in Creality Print, Bambu Studio and Orca Slicer.
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Don't want to design your own? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Compatibility
Same mating interface as the adapters — stacks on a shelving unit, a workbench, or a deep drawer.
Always check the label on your storage case or drawer to confirm the exact model number, and compare it against the compatibility chart above. Contact us if you have questions.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.