
Mountaineer Maker
Milwaukee Packout 3/8" Metric 6-Point Socket Organizer STL File – Tekton SHD91211 (38-Pc)
Fits Milwaukee Packout 48-22-8431 · 3/8" metric 6-point STL · left- and right-hand files · Tekton SHD91211, 38 sockets
Instant download — sent to your email after purchase
Prefer it printed? Get the finished organizer →
Engineered, built, and test-fit before it ships.
Digital License
✓Personal use only
✓Print for yourself or as a personal gift
✗No resale of file or prints
✗No sharing or distributing
Details
Print the organizer yourself. This is the 3D print file for our Tekton SHD91211 organizer insert for the Milwaukee Packout 48-22-8431: the complete 3/8" drive metric 6-point set, standard and deep, every size from 6 mm to 24 mm with no skipped sizes. 38 sockets, every socket size labeled.
DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, tools, organizer and Packout case are not included, and nothing is shipped.
WHAT YOU'LL RECEIVE
- Two STL files: the left-hand and the right-hand version of the organizer, each one piece with the raised size labels in place. The right-hand file mirrors the left, with the labels still reading the right way.
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 320 × 215 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF
SIZES COVERED
Standard sockets, 19: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm (SHD12106–SHD12124)
Deep sockets, 19: the same 19 sizes (SHD13106–SHD13124)
FITS
✔ Milwaukee Packout 48-22-8431 (Low-Profile Organizer), in the left-hand or right-hand position. Print the side you need, or print both.
✘ Does not fit the 48-22-8430, 48-22-8435 or 48-22-8436.
Built to the Tekton SHD91211 set. Standard sockets stand upright; deep sockets lie flat in their own troughs.
⚠ NOT UNIVERSAL: the pockets are cut to Tekton SHD91211 3/8" metric 6-point sockets. Other brands and sets may not fit. Message us before buying if you're unsure.
PRINTER REQUIREMENTS
- Each side prints as one piece, 319 × 213 × 38 mm. Your bed must be at least about 320 × 215 mm. It does not fit 256 × 256 or 300 × 300 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- Prints flat, as-is. Designed and tested on a Creality K2 Plus; we print ours in PETG.
COLOR
- The file prints in one color as-is: the size labels stand 1 mm proud, so they read in a single color.
- Want contrasting labels? Paint the label tops with your slicer's paint tool.
LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.
Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.
Good to know
- Insert only — adapters, storage trays, tools and toolbox are not included.
- Visible layer lines are normal. They’re part of how every organizer is printed, and they don’t affect fit or function.
- Color may vary slightly from the photos, due to monitor settings and material batches.
- Some socket slots may extend to the bottom of the organizer, depending on the geometry of the sockets. That’s a normal part of the engineered design, not a defect.
Precision-Fit
Designed from the actual sockets.
Engineered, Built & Test-Fit
Engineered, built, and test-fit before it ships.
Made in West Virginia
Built to go together
Goes with this organizer
Optional add-ons. Some organizers work fine on their own; add only what fits your setup.
Milwaukee Packout 3/8" SAE 6-Point Socket Organizer STL File – Tekton SKT15101 (34-Pc)
Milwaukee Packout 3/8" Metric 6-Point Socket Organizer Insert – Tekton SHD91211 (38-Pc)