Milwaukee Packout 1/2" Milwaukee Shockwave Metric Standard-Depth 6-Point Impact Socket Organizer STL File – No-Skip Complete Series (8mm–36mm)

Print the organizer yourself. This is the 3D print file for our Milwaukee SHOCKWAVE organizer insert: the complete 1/2" drive metric standard-depth impact lineup, 6-point, 8–36mm, 29 sockets, no skipped sizes, every size labeled. Milwaukee's 49-66-6804 set covers 14 of these sizes (10–22mm and 24mm); the rest are sold individually, and the file has a pocket for every one.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizer and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- One STL file: the whole organizer as one piece, with the size labels raised on six stepped decks
- A Start-here card linking to our print instructions: recommended settings, plus how to split the organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

FITS
✔ Tool chest drawers with at least 58 mm of clear height (the organizer is 57.5 mm tall), no adapter
✔ Milwaukee Packout 48-22-8430 (Deep Organizer) and 48-22-8435 (Compact Deep Organizer), Packout slim, medium and deep drawers, and the Bauer 71125 drawer, each with the matching Mountaineer Maker spacer or adapter (sold separately)
Built to Milwaukee's SHOCKWAVE 1/2" metric standard-depth impact sockets, 8mm through 36mm. Too tall for the low-profile organizers (48-22-8431 and 48-22-8436).

⚠ NOT UNIVERSAL: pockets are cut to Milwaukee SHOCKWAVE 1/2" metric standard-depth impact sockets. Other brands and deep sockets may not fit. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- One piece, 293 × 193 mm and 57.5 mm tall. Your bed must be at least about 300 × 200 mm. It does not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- No supports needed: print it as it loads, flat side down
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- The size labels are raised 1 mm. They sit on decks at six different heights, so a single filament change won't catch them all: to print them in a second colour, paint the label tops with your slicer's colour-painting tool.
- Printed in one colour, the raised numbers still read clearly.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.