Milwaukee Impact Socket Organizer for Packout, 1/2" Drive Shockwave Metric Deep & Shallow No-Skip Complete Set

Stop hunting for the right socket. This 3D printed two-tray stacking set holds your complete Milwaukee SHOCKWAVE 1/2" metric impact socket collection — every size from 10mm to 27mm, in both deep and standard depth, organized in a single deep Packout organizer.

TRAY ONLY — IMPORTANT
This listing is for the 3D printed tray set only. Sockets, tools, and Milwaukee Packout case are not included.

WHAT YOU'LL RECEIVE
- 2 PETG socket trays (tough, heat-resistant material) — printed, inspected, and test-fit before shipping
- Tray 1 (Base — Deep Sockets, 10mm–22mm): Holds 13 Milwaukee SHOCKWAVE 1/2" metric deep impact sockets. Sits in the base of the Packout organizer.
- Tray 2 (Nested — Mixed, 10mm–27mm): Nests directly on top of Tray 1. Holds all 18 Milwaukee SHOCKWAVE 1/2" metric standard (shallow) impact sockets plus the 5 large deep impact sockets (23mm–27mm) that won't fit in Tray 1.
- 36 sockets total across both trays
- Elastic lifting handles on both trays — makes it easy to pull the loaded trays cleanly out of the deep Packout organizer
- Size labels embossed directly into every pocket on both trays

FITS YOUR PACKOUT — IMPORTANT NOTE ON COMPATIBILITY
This two-tray stacking set fits Milwaukee Packout Organizers — not the Low-Profile variants. The stacked height of both trays requires the full interior depth of the standard-depth organizer. Low-profile Packout lids will not close over the stacked set.

✔ 48-22-8430 (Organizer) — deep socket tray drops in, standard tray nests on top, lid closes fully
✔ 48-22-8435 (Compact Organizer) — same depth as 8430, stacked trays fit, lid closes fully
✗ 48-22-8431 (Low-Profile Organizer) — NOT compatible, insufficient interior depth for two-tray stack
✗ 48-22-8436 (Compact Low-Profile Organizer) — NOT compatible, insufficient interior depth for two-tray stack
✔ Standard tool chest — use the stacked tray set in any drawer with sufficient depth, or add the optional dovetail-locking grid frame to lock trays into a perfectly aligned system (see shop)

SOCKET SET COMPATIBILITY
Milwaukee SHOCKWAVE 1/2" Drive 6-Point Metric Impact Sockets — 10mm to 27mm (18 sizes, both depths)

Milwaukee does not sell a single set covering this full range in both depths. This tray set is designed for the complete assembled collection, requiring a combination of sets and individual purchases. Sizes larger than 27mm are not accommodated.

TRAY 1 — Base (Deep sockets, 10mm–22mm, 13 sockets):
49-66-6271 — 10mm
49-66-6272 — 11mm
49-66-6273 — 12mm
49-66-6274 — 13mm
49-66-6275 — 14mm
49-66-6276 — 15mm
49-66-6277 — 16mm
49-66-6278 — 17mm
49-66-6279 — 18mm
49-66-6280 — 19mm
49-66-6281 — 20mm
49-66-6282 — 21mm
49-66-6283 — 22mm

TRAY 2 — Nested (Mixed: standard 10mm–27mm + large deep 23mm–27mm, 23 sockets):

Standard (shallow) sockets, 10mm–27mm (18 sockets):
49-66-6242 — 10mm
49-66-6243 — 11mm
49-66-6244 — 12mm
49-66-6245 — 13mm
49-66-6246 — 14mm
49-66-6247 — 15mm
49-66-6248 — 16mm
49-66-6249 — 17mm
49-66-6250 — 18mm
49-66-6251 — 19mm
49-66-6252 — 20mm
49-66-6253 — 21mm
49-66-6254 — 22mm
49-66-6255 — 23mm
49-66-6256 — 24mm
49-66-6257 — 25mm
49-66-6258 — 26mm
49-66-6259 — 27mm

Large deep sockets, 23mm–27mm (5 sockets):
49-66-6284 — 23mm
49-66-6285 — 24mm
49-66-6286 — 25mm
49-66-6287 — 26mm
49-66-6288 — 27mm

⚠️ NOT UNIVERSAL — This tray set is dimensioned specifically for Milwaukee SHOCKWAVE 1/2" metric impact sockets. Other brands use different wall thicknesses and socket lengths and may not fit correctly. If you're unsure, message me before ordering.

Matching 1/2" SAE socket tray set: https://www.etsy.com/listing/4477866151

Check my shop for trays covering other Milwaukee 1/2" socket combinations. Don't see the combination you need? Message me — I can design and print a custom tray for your exact set.

MATERIALS & COLORS
- Material: PETG — a tough, heat-resistant plastic that handles garage heat and chemical exposure without warping or degrading.
- Tray colors: Black or Red
- Label colors: Red, Black, or White
- Select your color combination from the purchase options.
- Every tray is printed and test-fit before shipping.
- Note on surface finish: 3D-printed parts may show minor layer lines or slight texture. This is normal and has no effect on fit or function.

WHAT MAKES THIS DIFFERENT
✔ Two-tray stacking system — deep socket base tray sits on the bottom, mixed tray nests directly on top, both fit inside a single Milwaukee Packout Organizer (48-22-8430 or 48-22-8435)
✔ Complete 1/2" metric coverage — 36 sockets total: 13 deep (10mm–22mm), 18 standard (10mm–27mm), and 5 large deep (23mm–27mm)
✔ Elastic lifting handles — both trays include handles so you can pull the fully loaded trays cleanly out of the deep Packout organizer
✔ Lid closes fully on both compatible Packout models — no bulge, no interference
✔ Tool chest ready — use the stacked set in any drawer, or add the optional dovetail-locking grid frame for a perfectly aligned system (like Gridfinity, but purpose-built for a real workshop)
✔ Sockets stay put during transport — pockets dimensioned to hold sockets securely during vertical carry, vehicle trips, and accidental drops
✔ Size labels embossed directly into every pocket — find the right socket without pulling them all out
✔ No tools, adhesive, or hardware needed — trays drop straight in and nest without fasteners
✔ Rigid PETG construction — tough enough that it won't compress or tear like foam inserts
✔ Made in West Virginia, USA — printed, inspected, and test-fit before it ships

THE MOUNTAINEERMAKER SYSTEM
This tray set is part of the MountaineerMaker socket organizer system. Every tray shares the same standardized footprint, so they drop into any compatible Milwaukee Packout organizer — no measuring, no adapters. The tapered base lets you nest trays or stack them in a standard tool chest drawer using the optional dovetail-locking grid frame. Think Gridfinity, but purpose-built for a real workshop. Check my shop for the matching 1/2" SAE companion tray set and other drive-size options that fit together into a complete organized system.

PERFECT FOR...
Perfect for automotive technicians, mechanics, electricians, contractors, and serious DIYers who need reliable, professional tool organization. Also makes a great gift for him, gift for Dad, or a shop upgrade they'll use every day. Ideal for birthdays, Father's Day, Christmas, or any occasion where the toolbox needs a little TLC.

CUSTOM ORDERS
Need a tray for a socket set not listed in my shop? Message me with the brand and model number — I can usually design and print a custom solution. I've made trays for a wide range of sets and I'm happy to help get your collection organized.

PLEASE NOTE
Custom-printed items are made to order. If there's an issue with your tray, message me first — I'll make it right.

Questions before you order? Message me — I'm happy to confirm fit for your specific Packout or socket set. If this tray earns a permanent spot in your garage, a quick review makes a huge difference for a small shop. Thanks for supporting MountaineerMaker!