Milwaukee Packout 1/2" Shockwave Metric Impact Socket Organizer Set STL File – Deep & Standard 10–27mm (36-Pc)

Print the organizer set yourself. This is the 3D print file for our two-organizer Milwaukee SHOCKWAVE set: 1/2" drive metric impact sockets, 6-point, 10mm through 27mm in both deep and standard depth, 36 sockets, every socket labeled. A deep-socket base organizer sits at the bottom and a second organizer, holding the standard sockets and the large deep sizes, nests on top of it.

DIGITAL FILE ONLY
You receive a ZIP download right after purchase. Sockets, organizers and toolbox are not included, and nothing is shipped.

WHAT YOU'LL RECEIVE
- Two STL files: the base organizer and the top organizer, one file each, the same design we print for the finished set
- A Start-here card linking to our print instructions: recommended settings, plus how to split each organizer with your slicer's cut tool (Creality Print, Bambu Studio, Orca Slicer) if your bed is smaller than about 300 × 200 mm
- The license: the Mountaineer Maker Digital Product License (v1.0) as a PDF

WHAT GOES WHERE
- Base organizer (13 sockets): the deep sockets 10mm–22mm, lying flat in labeled troughs
- Top organizer (23 sockets): all 18 standard sockets 10mm–27mm standing upright, plus the large deep sockets 23mm–27mm lying flat
Milwaukee doesn't sell this range as one set; the files hold it however you've built your collection. Sizes below 10mm and above 27mm are not included.

FITS
✔ Milwaukee Packout organizers 48-22-8430 and 48-22-8435: the base drops in, the top nests on it, and the lid closes
✔ Standard tool chest drawers with at least 75 mm of clear height for the stacked pair (each organizer is 37 mm tall)
With an adapter: Packout drawers and the Bauer 71125 drawer, using our drawer adapters (sold separately). Too tall for the low-profile organizers (48-22-8431 and 48-22-8436).

⚠ NOT UNIVERSAL: pockets are cut to Milwaukee SHOCKWAVE 1/2" metric impact sockets. Other brands may not fit. Message us before buying if you're unsure.

PRINTER REQUIREMENTS
- Two pieces, each 293 × 193 × 37 mm. Your bed must be at least about 300 × 200 mm. They do not fit 256 × 256 mm beds in one piece.
- Smaller bed? Your slicer can cut it to fit. See the step-by-step print instructions for Creality Print, Bambu Studio and Orca Slicer.
- Print each one flat side down. The base organizer prints without supports; turn on your slicer's automatic supports for the top organizer (we use them for its first few millimetres)
- Designed and tested on a Creality K2 Plus; we print ours in PETG

TWO-COLOUR LABELS (optional)
- The size labels are raised 1 mm, so you can print them in a second colour by painting the label tops with your slicer's colour-painting tool (Creality Print, Bambu Studio and Orca Slicer all have one). Otherwise each organizer prints in one colour.

LICENSE
Personal use under the Mountaineer Maker Digital Product License (v1.0). You may print it for yourself and give prints as personal gifts; selling prints or sharing the file needs a commercial license or written permission.

Prefer it printed? We sell the finished organizer in our shop. Don't have this exact set? Message us. We build organizers for specific socket sets.